Simultaneous determination of the size and surface charge of individual nanoparticles using a carbon nanotube-based Coulter counter

A resistive-pulse Coulter counter based on a membrane containing a single multiwall carbon nanotube (MWNT) channel was used to simultaneously determine the size and surface charge of carboxy-terminated polystyrene nanoparticles. The membrane was prepared from an epoxy section containing a MWNT channel mounted on a poly(dimethylsiloxane) (PDMS) support structure. The PDMS support reduced the background noise level by a factor of > 20 compared to the Si/Si3N4 support structure used in our previous study. The lower noise level makes it possible to accurately measure the height and width of resistive-pulse signals resulting from transport of individual particles through the MWNT channel. Particle sizes, calculated from current pulse heights, were comparable to those determined by transmission electron microscope (TEM). The width of the current pulses is a measure of the nanoparticle transport time, and it permits calculation of the electrokinetic surface charge. Different types of polystyrene nanoparticles having nearly the same size, but different electrokinetic surface charge, could be resolved on the basis of the difference in their transport time.     

Characterization of polymer films using a slow positron beam

Polymer structures have been investigated using positron annihilation lifetime spectroscopy (PALS) with a slow positron beam as well as a conventional radioactive source (²²Na). The properties of the free volume holes near the polymer surface were studied as a function of the positron implantation energy. The longest lifetime was associated with ortho-positronium (o-Ps) annihilation in the free volume holes. In polytetrafluoroethylene film, the lifetime of o-Ps was observed to decrease with increasing positron implantation depth, and a significant change in the o-Ps lifetime was found at a short distance (about 10 nm) from the surface, while its intensity increased. This result implies that near the polymer surface the free volume holes become larger that in the bulk. The effect of temperature on the polymer sub-surface layers was also studied. For high molecular weight polystyrene, the glass transition temperature for the sub-surface was lower than that for the bulk and thermal expansion coefficient of the sub-surface layers was found to be larger than the bulk value. Electronic Publication     

Extracellular soluble polysaccharide (ESP) from Aspergillus kawachii improves the stability of extracellular beta-gluocosidases (EX-1 and EX-2) and is involved in their localization

Aspergillus kawachii produces two extracellular beta-glucosidases (EX-1 and EX-2) and one cell-wall-bound beta-glucosidase (CB-1), all of which are derived from the same bglA gene. Extracellular beta-glucosidases (EX-1 and EX-2) are stable in the crude solution form, but become unstable in the purified form under moderate conditions (pH 5.0 and 37 degrees C). Purified extracellular beta-glucosidases can bind to a mycelial cell wall fraction, even though these enzymes are released into the medium under solid culture conditions. A. kawachii produces an extracellular soluble the beta-glucosidases over the pH range of 3.0-7.0 and at temperatures below 50 degrees C. ESP directly interacted with the purified extracellular beta-glucosidases but did not affect the K(m) values of these enzymes. Moreover, ESP inhibited the adsorption of purified extracellular beta-glucosidases to the cell wall fraction and extracted them from it. These results that ESP plays important roles in the stability and localization of extracellular beta-glucosidases. ESP from A. kawachii directly binds to the enzymes and releases them to the medium from the cell wall layer and then stabilizes them.     

Determination of nitroarenes in precipitation collected in Kanazawa, Japan

Eight nitroarenes, 1,3-, 1,6- and 1,8-dinitropyrenes, 1-, 2- and 4-nitropyrenes, 6-nitrochrysene and 2-nitrofluoranthene, in precipitation collected in Kanazawa were determined. The nitroarenes in the precipitation were concentrated onto solid phase extraction cartridges, and identified with high-performance liquid chromatography with chemiluminescence detection. The nitroarene concentrations in the precipitation were in the range 0.016-15 pmol/L, and the nitroarene composition tended to be the same as that in airborne particulates. 1-Nitropyrene in river water and seawater were also determined. 1-nitropyrene concentrations on the days after rain (19-110 fmol/L) were higher than those on the days before rain (4,11 fmol/L). Moreover, 1-nitropyrene concentrations in the river water were much lower than those in the precipitation, but were higher than those in the seawater. These results suggested that the nitroarenes in the precipitation and the river water came from airborne particulates.     

A New Segment Quantization Using Lempel–Ziv Algorithm and Its Application to Quantization of Line Spectral Frequencies

A new segment quantization method using the Lempel-Ziv algorithm is proposed, and it is applied to quantize line spectral frequency parameters in speech codec. The proposed segment quantizer can save four bits per frame, compared with the ITU-T G.729 speech codec (18 bits/frame), without degradation of subjective or objective speech quality     

An 8.1-ns Column-Access 1.6-Gb/s/pin DDR3 SDRAM With an 8:4 Multiplexed Data-Transfer Scheme

Three circuit techniques for an 8.1-ns column-access 1.6-Gb/s/pin 512-Mb DDR3 SDRAM using 90-nm dual-gate CMOS technology were developed. First, an 8:4 multiplexed data-transfer scheme, which operates in a quasi-4-bit prefetch mode, achieves a 3.17-ns reduction in column-access time, i.e., from 11.3 to 8.13 ns. Second, a dual-clock latency counter reduces standby power by 22% and cycle time from 1.7 to 1.2 ns. Third, a multiple-ODT-merged output buffer enables selection of five effective-resistance values Rtt (20, 30, 40, 60, and 120 Omega) without increasing I/O capacitance. Based on these techniques, 1.6-Gb/s/pin operation with a 1.36-V power supply and a column latency of 7 was accomplished     

Electric Field Distributions of Wearable Devices Using the Human Body as a Transmission Channel

Recently, wearable devices which use the human body as a transmission channel have been developed. However, there has been a lack of information related to the transmission mechanism of such devices in the physical layer. Electromagnetic communication trials using the human body as a transmission medium have more than a decade's history. However, most of the researches have been conducted by researchers who just want to utilize the fact and practically no physical mechanisms have been researched until recently. Hence, in this paper, the authors propose some calculation models of the human body equipped with the wearable devices by using the finite difference time domain (FDTD) method. Moreover, a biological tissue-equivalent solid phantom is utilized to show the validity of the calculation. From these investigations, the authors determine the transmission mechanism of the wearable devices using the human body as a transmission channel.     

Analytic Flow Design Method for an Automated Distribution Center with Multiple Shipping Areas

An analytic flow design algorithm for an automated distribution center with multiple shipping areas is presented. The main elements of the analytic flow design are the number of devices and the volumes of product flow between the devices. In the design of an automated distribution center, it is necessary to satisfy the demand throughput while minimizing construction costs. In the conventional design process, system engineers utilize experimental and intuitional approaches. However, conventional approaches are time-consuming and the design outcome is dependent on the skill of the designer. Therefore, a theoretical design algorithm is needed. We propose an analytic flow design algorithm using a dynamic network flow model and considering time-variable flow volumes according to shipment and storage schedules. To verify the feasibility of the proposed method, we perform analytic flow design using real data and confirm that the proposed method can yield a feasible analytic flow design in several minutes.