Fast computation of computer-generated hologram using Xeon Phi coprocessor

We report fast computation of computer-generated holograms (CGHs) using Xeon Phi coprocessors, which have massively x86-based processors on one chip, recently released by Intel. CGHs can generate arbitrary light wavefronts, and therefore, are promising technology for many applications: for example, three-dimensional displays, diffractive optical elements, and the generation of arbitrary beams. CGHs incur enormous computational cost. In this paper, we describe the implementations of several CGH generating algorithms on the Xeon Phi, and the comparisons in terms of the performance and the ease of programming between the Xeon Phi, a CPU and graphics processing unit (GPU).     

Characteristics of epoxy resin cured with in situ polymerized curing agent

In order to improve the heat resistance of a cured epoxy resin together with reducing the viscosity of the resin composition, an epoxy resin was cured with a curing agent formed from the radical copolymerization of vinyl monomers during the cure process of the epoxy resin. N-phenylmaleimide and p-acetoxystyrene were used as vinyl monomers of the curing agent. The epoxy resin was cured by the insertion reaction of the ester group of the in situ polymerized curing agent and the epoxy group of the epoxy resin. In the cure system of the epoxy and the phenol resins, reduction of the viscosity of the resin composition was achieved by replacing some or all of the phenol resin with these monomers. When all phenol resins were replaced by these monomers, the viscosity of resin composition (0.01 Pa s at 70 °C) decreased by about 1/2000 compared with that of the system with only phenol resin (21 Pa s at 70 °C). The glass transition temperature (T_g) of the cured resin with no phenols was 174 °C, an improvement of 17 °C compared with that of the system cured with only phenol resin. The flexural strength of the new resins remained unchanged.     

Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

Efficient material design for diesel particulate filters

This paper will give an overview about the filter development for diesel particulate emission control in automotive applications. The material development for passenger car diesel particulate filters led to new materials like silicon carbide while for heavy duty applications still Cordierite plays a major role. But in the future other materials might also be used for passenger cars. This paper will show the basic difference between both applications and describe the material design in terms of filter properties (base material, back pressure aspects, filtration efficiency, coating impact). Current application on vehicles with catalysed soot filters (CSF) with and without oxidation catalyst will be presented. Furthermore an outlook will be given on materials for catalysed soot filters for the future.     

Development of large-scale stacked-type electrostatic actuators for use as artificial muscles

Electrostatic actuators have the advantages of light weight, flexibility, and high energy efficiency, which make them suitable for use as artificial muscles. However, a traditional electrostatic actuator cannot generate long strokes and a high force density at the same time because such actuator would excessively widen the gap between the electrodes because of its structure. This paper presents a newly developed large-scale stacked-type electrostatic actuator (LSEA) intended for use as an artificial muscle for robots. LSEA is a multi-stacked electrostatic actuator that can be linearly contracted by the application of a voltage. It has a unique structure that prevents overextension of the gap between the electrodes. It can therefore generate a large force. The spring characteristics and the relationship between the contractive force and the stroke were experimentally determined. The findings showed that LSEA prevents the overextension of the gap between the electrodes and has a high contraction ratio that is equivalent to that of a mammalian skeletal muscle.     

Studies on sublimation of disperse dye out of dyed polymers. I. Rate of sublimation and amorphous transition points of poly(ethylene terephthalate)

Four samples of poly(ethylene terephthalate) film of various crystallinities and orientation were dyed with p-nitroaniline and disperse dyes. When these films were heated under a 2–3 × 10^?3 mm Hg vacuum at a specified temperature T, the dye sublimed out of the dyed specimen. The amount (M_t/M_∞) of sublimed dye is in linear proportion to the square root of the sublimation time, t^½, where M_t and M_∞ are the amounts of dye sublimed for times t and t = ∞. The diffusion coefficient D, calculated from the slope of the above plot, is independent of the dye concentration of the film. When log D is plotted against 1/T°K over the temperature range 320–520°K, the relation is composed of two to four intersecting lines with the slope decreasing with elevation of temperature and with the breaks at about 89°–98°, 122°–135°, 155° and 175°–176°C. These breaks are the amorphous transitions: the first is the glass transition temperature T_g, the second and the fourth are the amorphous transitions corresponding to the crystalline transition points, i.e., the cold crystallization temperature and the smectic–triclinic transition temperature. With some exceptions, these amorphous transitions are found also by dilatometry and electrical conductivity measurements. The apparent activation energy for diffusion decreases from about 100 kcal/mole for the glass state to 22–24 kcal/mole for the region above 180°C. The activation energy for each region changes slightly with the size of dye molecule and the crystallinity and orientation of the film.     

The effects of oxygen diffusion on the surface photooxidation of polystyrene

This paper further illustrates the applicability of multiple internal reflectance infrared spectroscopy to the analysis of near-surface photooxidation. The results are compared with transmission infrared spectra to evaluate compositional gradients resulting from photooxidation and the influence of oxygen diffusion. The sample was a solvent-cast film of atactic, narrow distribution polystyrene, M_w of 100,000, that had been drawn to a ratio of 3.0 at 110°C by solid state coextrusion. Irradiation of these thin films, ～25μm thickness, was performed on exposure to air at 35°C for periods of up to 6 h using a mercury source emitting at 254 nm. On photooxidation, a board peak appears at 3200–3500 cm^?1, attributable to hydroperoxide formation. The most dramatic increase in the infrared spectra is found for a carbonyl band at 1730 cm^?1. It appears to result from an aromatic acid group since it is shifted to 1660 cm^?1 on immersion of the oxidized polystyrene films in aqueous ammonium hydroxide. It is confirmed that the photooxidation of polystyrene occurs preferentially at the surface and that this reaction rate is greatly reduced in the drawn polystyrene film.     

Poly(p-tert-butoxycarbonyloxystyrene): a convenient precursor to p-hydroxystyrene resins

An efficient synthetic route to pure, high molecular weight poly(p-hydroxystyrene) is reported. The route involves synthesis of a new monomer, p-tert-butoxycarbonyloxystyrene, polymerization by radical initiation or by cationic initiation in liquid SO₂, followed by thermolysis or acidolysis of the tert-butoxycarbonyl protecting group. Porous, crosslinked resin beads containing the nucleophilic, phenol pendant group have been prepared in a similar fashion from the precursor terpolymer of p-tert-butoxycarbonyloxystyrene, styrene and divinylbenzene. The utility of this resin for solid-phase synthesis has been demonstrated.     

Change of the amorphous state by heat treatment below the glass transition temperature

This study was undertaken to elucidate the state of a polymer in the amorphous state through a change of motion of the molecular chain caused by heat treatment below the glass transition temperature. From dielectric measurements of amorphous poly(ethylene terephthalate) heat-treated below T_g, it was found that the average relaxation time, the distribution of relaxation time and the dielectric strength increase with increase of heat treatment. From these results, it was concluded that the amorphous state becomes more random by heat treatment.     

Compressibility of the polymer crystal

Results for the compressibilities of a wide range of polymer crystals along the fibre- and the transverse crystal axes are presented. Good agreement is found between the theoretical and the experimental results of different authors.