Application of a novel polypropylene to the insulation of an electric power cable

Cross‐linked polyethylene (XLPE) has been widely adopted as insulating material for high‐voltage power cables up to 500 kV. Further improvement of electrical and thermal properties on insulating material is required in order to increase cable operation efficiency. Therefore, the development of novel insulating material possessing high thermal properties will be necessary. Recent progress of catalysis technology contributes to obtain new polymeric materials which may be applied to electrical insulation. The authors investigated the basic properties of newly developed stereoregular syndiotactic polypropylene (s‐PP) which is synthesized with homogeneous metallocene catalyst. Though recycling of cross‐linked polymers such as conventionally used XLPE may be difficult because of their poor heat deformation, the s‐PP which is not cross‐linked must be suitable for recycling. A series of experiments on its physical and electrical properties gave the following results.

• (1) s‐PP has sufficient flexibility compared with isotactic polypropylene (i‐PP ).
• (2) Both AC and lightning impulse breakdown strength of s‐PP in spite of no cross‐linking are superior to those of XLPE in the temperature range from 25 to 90 °C.
• (3) Degradation by copper of s‐PP is less than that of i‐PP.
• (4) s‐PP/VLDPE blend shows sufficient brittleness temperature for use.

These results suggested that s‐PP should serve as insulating material for power cables at higher‐temperature operation. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(1): 18–26, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002//eej.10210     

Prognostic predictor with multiple fuzzy neural models using expression profiles from DNA microarray for metastases of breast cancer

Gene expression profiling data from DNA microarray were analyzed using the fuzzy neural network (FNN) modeling method for predicting the distant metastases of breast cancer. The best model consisting of five genes was able to predict metastases of breast cancer with 94% accuracy. Furthermore, 100% accuracy was achieved by majoritarian decision using only 25 genes from five noninferior models which were constructed independently. From the constructed model, gene expression rules, which may cause distant metastases, were explicitly extracted and 60% of the metastases cases could be explained by this rule. The FNN modeling method described in this paper enables precise extraction of significant biological markers affecting prognosis without prior knowledge.     

Characterization of infrared and near-infrared absorptions of free alcoholic OH groups in hydrocarbon

We have demonstrated that the near-infrared and infrared absorptions in the 8000-3200 cm(-1) region of an OH group of 2-nonanol, 1-nonanol, etc., in n-heptane are excellently separated by subtraction without any serious interference down to very low concentrations at which OH groups are completely free. The separated sharp absorptions are assigned to the fundamental, combination, and overtone bands that are concerned with the OH stretching of free OH. Two components of a sharp overtone band around 7100 cm(-1), which are observed for primary and secondary alcohols, are assigned to coexisting internal rotational isomers of an OH group around the O-C bond. The frequencies of the OH stretching fundamental and overtone bands that are assigned to internal rotational positions are consistent for all the investigated alcohols, including methanol and tertiary butanol. Comparison of the separated spectrum of 2-nonanol in n-heptane with that in 1-chlorooctane or in carbon tetrachloride makes it clear that hydrocarbon is an inert solvent that does not disturb the intrinsic nature of an alcohol OH group. There actually exists a constant anharmonicity shift of 169-175 cm(-1) between the double frequency (2nu(OH)o) of the observed fundamental and the observed overtone frequency ([2nu(OH)]o) for free OH of various alcohols in n-heptane.     

Colloidal gold submonolayer-coated thin-film glass plates for waveguide-coupled surface plasmon resonance sensors

A novel optical sensor based on spectroscopic measurement of the plasmon absorption of a colloidal gold submonolayer immobilized upon a planar waveguide has been developed for label-free detection of biomolecular interactions at the sensor's surface. We fabricated the sensor by locally modifying a 50-microm-thick glass plate with hemoglobin (Hb) and then self-assembling gold colloids from the aqueous solution onto the Hb-modified area of the glass plate. Polychromatic light from a xenon-arc lamp was launched into the thin-film glass plate by use of a broadband fiber-coupling method. With the use of a CCD detector to monitor the light beam emitted from an end face of the glass plate, the plasmon absorption spectrum of the colloidal gold submonolayer was determined to depend on the polarization states of the guided light and to change with the refractive index of the medium in contact with the colloids. In addition to simplicity of fabrication and the ease of use, the sensor yields a larger absorbance sensitivity than the normal transmission measurement.     

Visualization of phase objects by use of a differentiation filter

For the visualization of phase objects by use of a differentiation filter, the phase variation is changed into the intensity variation by differentiation, and then the differentiated image is integrated. In the method used in practice, the differentiated image has been recorded on a film, and then integrated by use of a filter. In this paper, however, the image differentiated by means of a filter is entered into a computer using a CCD camera and then integrated. As a result, the method provides rapid on-line processing. We have performed computer simulations and a detailed analysis of the differentiation filter and also provide the experimental results of three-dimensional image visualization.     

Superconducting Gap Structure of YNi2B2C Determined by Thermal Conductivity

In order to determine the superconducting gap structure of the borocarbide superconductor YNi₂B₂C, we have measured the angular variation of the c-axis thermal conductivity _zz in magnetic field rotated within the ab-planes. A clear fourfold symmetry with narrow cusps was observed in the angular variation of _zz . These results provide a strong evidence that the gap function has point nodes which are located along the a- and b-axes of the crystal.     

Roasting effects on the distribution of tocopherols and phospholipids within each structural part and section of soybeans

To clarify the effects of microwave roasting on the distribution of tocopherols and FA of phospholipids within soybeans, whole soybeans (Glycine max) were treated by microwave and further evaluted as compared to a raw sample. Tocopherol homologs, measured using HPLC, and phospholipid profiles, quantified with GC, were determined in the seed coat, the embryonic axis, and selections of cotyledons separated from three cultivars. The tocopherols were predominantly detected in the axis, followed by the cotyledons, and then very little in the coat. As much as 25% of the individual tocopherols originally present in the coat were lost at 12 min of roasting, whereas <25% was lost in the cotyledons and the axis after 20 min of roasting. The greatest rate of phospholipid loss (P<0.05) was observed in PE, followed by PC and PI, and their changing patterns were more pronounced in the coat than in the cotyledons or the axis. Thus, tocopherol content and phospholipid profiles change with microwave roasting according to tissue.     

Source-synchronization and timing vernier techniques for 1.2-GB/sSLDRAM interface

This paper describes a validation system for an SLDRAM interface. The SLDRAM system utilizes two techniques to achieve a high data-transfer rate with a conventional module mounting style. The first technique is a source-synchronization scheme. Since the chip that transmits data also supplies the data clock, the clock and data are completely synchronous. The second is the timing vernier technique. A wait time for output data is programmable in each SLDRAM. Therefore, the time at which data arrive at the controller from any SLDRAM can be set by the controller with a 200-ps step size. The validation chip is designed to emulate these operations. The chip is fabricated using a 0.35-μm CMOS process technology and packaged in a conventional 0.65-mm pitch thin small out-line package, mounted on a single-chip module, and put into an eight-module system. A stub series terminated logic (SSTL)-like interface is adopted for high-speed signals. From system-level measurements, the data eye width of 600 ps is obtained at a data rate of 600 Mbps. Errorless data transmission is observed in both read and write operations in a bit-error rate testing. The validation system has successfully demonstrated a data-transmission rate of 1.2 GB/s (600 Mbit/s/pin) using source-synchronization and timing vernier techniques at the supply voltage of 2.5 V     

Theoretical limitations of a Hopfield network for crossbarswitching

It has been reported through simulations that Hopfield networks for crossbar switching almost always achieve the maximum throughput. It has therefore appeared that Hopfield networks of high-speed computation by parallel processing could possibly be used for crossbar switching. However, it has not been determined whether they can always achieve the maximum throughput. In the paper, the capabilities and limitations of a Hopfield network for crossbar switching are considered. The Hopfield network considered in the paper is generated from the most familiar and seemingly the most powerful neural representation of crossbar switching. Based on a theoretical analysis of the network dynamics, we show what switching control the Hopfield network can or cannot produce. Consequently, we are able to show that a Hopfield network cannot always achieve the maximum throughput.