Selective sorption of heavy metal thiocyanate complexes on crown ether resin

The sorption behavior of heavy metal thiocyanate complexes was investigated for dibenzo-18-crown-6 (DB18C6) resin and bis[2-(o-methoxyphenoxy)ethyl]ether (BMPE) resin. The DB18C6 resin showed a high sorption ability and the degree of zinc sorption increased significantly with thiocyanate concentration. This behavior was not observed for BMPE resin. The sorption behavior was influenced by the countercation species, and the degree of sorption of zinc ions showed the maximum when the potassium thiocyanate was used as a complexing salt. The sorbed species appear to be KZn(SCN)₃, K₂Zn(SCN)₄ in the potassium thiocyanate system, and Zn(SCN)₂ in the lithium thiocyanate system, respectively, according to analysis of the sorption equilibrium. Sodium and ammonium thiocyanate systems show an intermediate behavior of the two. The sorption selectivity for DB18C6 resin depended not only on the hydrophobic nature of heavy metal thiocyanate complexes but also on the stabilization of counter cation species with crown ether matrix, and the sorption selectively was found to be effectively controlled by countercation species according to the cation-chelation mechanism.     

Ceramic Dental Molds for the Precision Casting of Titanium and Titanium Alloys: I, Relationship between Particle-Size Distribution of Aggregates and Mold Expansion

A new ceramic dental mold can cast excellent Ti restoratives by controlling expansion due to the oxidation of additive metal particles. The packing structure of the metal and aggregate particles in the mold can be considered a function of the size distribution of the aggregate grains. An investigation of the expansion mechanism reveals three different relationships of void fraction versus linear thermal expansion for the molds at the high temperature under which oxidation of the metal particles occurs. Room-temperature casting, favorable for making high-quality Ti restoratives, can also be achieved by precisely controlling both the amount of additive metal powder and the compositional distribution of aggregate grain sizes in the mold.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.     

Wien2wannier: From linearized augmented plane waves to maximally localized Wannier functions

We present an implementation of an interface between the full-potential linearized augmented plane wave package Wien2k and the wannier90 code for the construction of maximally localized Wannier functions. The FORTRAN code and a documentation is made available and results are discussed for SrVO₃, Sr₂IrO₄ (including spin-orbit coupling), LaFeAsO, and FeSb₂.     

Comparison of methods for assessing observer metamerism

Studies on observer metamerism reported so far are classified into two series. One is studies based on the color-matching functions of Stiles's 20 observers. The other is experimental studies by using the Davidson and Hemmendinger (D-H) Color Rule and color-normal actual observers. The large discrepancy of the degree of observer metamerism between the above two series of studies was analyzed by using the color-matching functions of Stiles's 20 observers and the D–H Color Rule. The results confirmed that the discrepancy in the observer-metamerism indices was caused by different computational procedures used for deriving the indices.     

Orientation of nanowires consisting of poly(3-hexylthiophene) using strong magnetic field

Nanowires consisting of regioregular poly(3-hexylthiophene) (P3HT) as a conducting polymer were prepared using p-xylene. Magnetic processing of the nanowires was carried out using two superconducting magnets with horizontal (B_max = 8 T) and vertical (B_max = 10 T) directions. The formation of the nanowires was confirmed by atomic force microscopy (AFM) measurement. The results from the AFM images and the polarized absorption spectra on glass plates indicated that the nanowires partly oriented themselves with their long axes, which are parallel to the π–π stacking direction, being perpendicular to the magnetic field. The magnetic orientation is most likely ascribed to anisotropy in the magnetic susceptibilities of the ordered P3HT in the nanowires.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Italian multicentre study on microbial environmental contamination in dental clinics: a pilot study

The dental practice is associated with a high risk of infections, both for patients and healthcare operators, and the environment may play an important role in the transmission of infectious diseases. A microbiological environmental investigation was carried out in six dental clinics as a pilot study for a larger multicentre study that will be performed by the Italian SItI (Society of Hygiene, Preventive Medicine and Public Health) working group "Hygiene in Dentistry". Microbial contamination of water, air and surfaces was assessed in each clinic during the five working days of the week, before and during treatments. Air and surfaces were also examined at the end of the daily activity. A wide variation was found in microbial environmental contamination, both within the participating clinics and relative to the different sampling times. Microbial water contamination in Dental Unit Water Systems (DUWS) reached values of up to 26 × 10⁴ cfu/mL (colony forming units per millilitre). P. aeruginosa was found in 33% of the sampled DUWS and Legionella spp. in 50%. A significant decrease in the Total Viable Count (TVC) was recorded during the activity. Microbial air contamination showed the highest levels during dental treatments and tended to decrease at the end of the working activity (p < 0.05). Microbial buildup on surfaces increased significantly during the working hours. As these findings point out, research on microbial environmental contamination and the related risk factors in dental clinics should be expanded and should also be based on larger collections of data, in order to provide the essential knowledge aimed at targeted preventive interventions.     

Concrete filled double skin circular stub columns under compression

Concrete filled double skin tubular (CFDST in abbreviation) stub columns consist of double concentric thin steel tubes and filled concrete between them. Their mechanical behaviors under axial compression were investigated experimentally. Two testing parameters considered were inner-to-outer diameters ratio and diameter-to-thickness ratio. Observed failure modes were controlled by the local buckling of both the tubes associated with shearing failure of the filled concrete. Main discussion is given on confinement effect by the outer tube to the filled concrete strength. Equations to estimate their ultimate strengths under compression were proposed based upon the yielding strengths of the tubes and the filled concrete cylinder strength.     

Differential Effects of Indole and Aliphatic Glucosinolates on Lepidopteran Herbivores

Glucosinolates are a diverse group of defensive secondary metabolites that is characteristic of the Brassicales. Arabidopsis thaliana (L.) Heynh. (Brassicaceae) lines with mutations that greatly reduce abundance of indole glucosinolates (cyp79B2 cyp79B3), aliphatic glucosinolates (myb28 myb29), or both (cyp79B2 cyp79B3 myb28 myb29) make it possible to test the in vivo defensive function of these two major glucosinolate classes. In experiments with Lepidoptera that are not crucifer-feeding specialists, aliphatic and indole glucosinolates had an additive effect on Spodoptera exigua (Hübner) (Lepidoptera: Noctuidae) larval growth, whereas Trichoplusia ni (Hübner) (Lepidoptera: Noctuidae) and Manduca sexta (L.) (Lepidoptera: Sphingidae) were affected only by the absence of aliphatic glucosinolates. In the case of two crucifer-feeding specialists, Pieris rapae (L.) (Lepidoptera: Pieridae) and Plutella xylostella (L.) (Lepidoptera: Plutellidae), there were no major changes in larval performance due to decreased aliphatic and/or indole glucosinolate content. Nevertheless, choice tests show that aliphatic and indole glucosinolates act in an additive manner to promote larval feeding of both species and P. rapae oviposition. Together, these results support the hypothesis that a diversity of glucosinolates is required to limit the growth of multiple insect herbivores.