Strategies for compensating for higher costs of geothermal electricity with environmental benefits

After very high growth in the 1980s, geothermal electricity production has slowed in the mid- and late-1990s. While Japanese, Indonesian and Philippine geothermal growth has remained high as a consequence of supportive government policies, geothermal electricity production has been flat or reduced in much of Europe and North America. Low prices for coal and natural gas, combined with deregulation, means that in much of the world electricity from new fuel-burning electricity plants can be provided at half the cost of new geothermal electricity. Cost-cutting must be pursued, but is unlikely to close the price gap by itself. Geothermal production is widely perceived as being environmentally clean, but this is not unambiguously true, and requires reinjection to be fully realized. Strategies for monetizing the environmental advantages of geothermal, including the carbon tax, are discussed.     

Determination of the thermal conductivity of argon and nitrogen over a wide temperature range through data evaluation and shock-tube experiments

Reliable and well-established methods to measure the thermal conductivity of gases are available only in the moderate temperature range, namely, up to about 1000 K. In the present study, a set of the most probable thermal conductivity values of components of gaseous combustion products in a wide range of temperatures has been obtained through an optimum combination of three procedures: critical assessment of available data in the moderate temperature range, experimental determination by the shock-tube method at high temperatures, and theoretacal estimation of temperature dependence in the intermediate temperature range. Among the components of combustion products, one monatomic gas and one diatomic gas, namely, argon and nitrogen, were studied in the present paper. The shock-tube measurements have been performed in the temperature ranges 1000–4500 K for argon and 500–2200 K for nitrogen. The results of the critical evaluation and the shock-tube measurements have been combined with the aid of theoretically assumed temperature dependence of the thermal conductivity.Invited paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Cold storage characteristics of mobile HTS magnet

A cold storage system specialized in mobile high-temperature superconducting (HTS) magnets (e.g. for magnetically levitated (maglev) vehicles) has been proposed. In this system, a cooling source is detachable and a HTS coil is capable of maintaining superconducting state with its heat capacity. This system allows a considerably lightweight HTS magnet.An apparatus was constructed to evaluate the possibility of using cold storage systems in maglev vehicles. The thermal characteristic of this apparatus was based on a magnet for previous maglev test vehicles [1]. The operational temperature range of the magnet was assumed from 20 K to 50 K. Some experiments indicated that heat conduction by residual gas was not negligible. Especially over 30 K, gas conduction took a large part of heat input. This phenomenon is attributable to reduction of cryopumping effect. However, activated carbon in the apparatus compensates cryopumping effect. A unique heat capacitor was also used to enhance the cold storage effect. Water ice was chosen as a heat capacitor because water ice has a higher heat capacity than metallic materials at cryogenic temperatures. A small amount of water ice also prolonged cryogenic temperature condition. These results indicate 1 day of cold storage is probable in a magnet for maglev vehicles.     

Microanalyses on the RuO2 Particle–Glass Matrix Interface in Thick-Film Resistors with Piezoresistive Effects

The piezoresistive mechanisms of composite thick films based on RuO₂ particles and both calcium-borosilicate and bismuth-borosilicate glass matrices were investigated by chemical and electrical microanalyses. The resistor based on bismuth-borosilicate glass showed higher sensitivity than that based on calcium-borosilicate glass. It was confirmed that the diffusion of ruthenium into glass affects the binding state of RuO₂ at the interface of the glass. Furthermore, an intermediate resistive layer is detected around the RuO₂ particle. These results suggest that the piezoresistive effect is related to a change in the electrical conductivity of the interfacial reaction layer caused by the diffusion of ruthenium into glass.     

Influence of SO3 on the Phase Relationship in the System CaO–SiO2–Al2O3–Fe2O3

The influence of the additive SO₃ on the phase relationships in the quaternary system CaO-SiO₂-Al₂O₃-Fe₂O₃ was investigated by observing the change of volume ratio of 3CaOSiO₂ (C₃S) to 2CaOSiO₂ (C₂S) + CaO (C) in the sintered material with the increase of SO₃ content. The primary phase volume of C₃S in the quaternary phase diagram shrank with the increase of SO₃ and disappeared when the SO₃ content exceeded 2.6 wt% in the sintered material. Changes in the peritectic reaction relationship between CaO (C), 2CaOSiO₂ (C₂S), 3CaOSiO₂ (C₃S), 3CaOAl₂O₃ (C₃A), 4CaOAl₂O₃Fe₂O₃ (C₄AF), and liquid were also observed and discussed.