Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

Biochip with integrated pumps for plug-based sequential exchange of solutions

A novel method for exchanging solutions used in biochemical analyses and a device to carry out the exchange are proposed. An array of plugs formed using six injectors was transported in a microflow channel using a main pump located at one end of the main flow channel. The injectors and main pump were operated on the basis of the change in volume caused by the electrolysis of water. Bubbles were produced from working electrodes; these bubbles caused a diaphragm placed below the injectors to inflate and occlude the inlet of the solution reservoir. Increase in the number of bubbles caused the reservoir to inject the solution into the main flow channel in the form of a plug. Each plug was individually transported downstream to the sensing area by the main pump, which was operated in a similar manner to the injector. The device was used for the detection of a tumor marker, α-fetoprotein (AFP). Plugs of necessary solutions were individually transported to the sensing area with immobilized primary antibodies to allow antigen–antibody binding, cleaning, and detection. The fluorescence intensity from the antibodies showed clear dependence on the concentration of AFP. The immobilization of antibodies could also be carried out on-chip.     

Product mix problems considering several probabilistic conditions and flexibility of constraints

This paper considers product mix problems including randomness of future returns, ambiguity of coefficients and flexibility of upper value with respect to each constraint such as budget, human resource, time and several costs. Particularly, the flexibility is assumed to be a fuzzy goal. Then, several models based on maximizing total future profits under a level of satisfaction to each fuzzy goal are proposed. Furthermore, the model considering preference ranking to each fuzzy goal of constraints is proposed. Since these problems are basically formulated as nonlinear programming problems, the transformations into deterministic equivalent problems are introduced and the efficient solution methods are developed. A numerical example for product mix problem is given to illustrate our proposed models.     

Toxicity and tetramine contents of salivary glands from carnivorous gastropods

Salivary glands from 29 species of marine carnivorous gastropods in nine families were examined for lethal activity against mice and tetramine content. Mouse lethality was assayed by intravenous injection of buffer extracts into mice, and was detected in 14 species. Heat-stability tests confirmed that toxins in four species were thermolabile, while those in eight species were thermostable. Based on the tetramine contents determined by the colorimetric method using methanolic extracts, the thermostable toxins in seven species (Neptunea eulimatalamellosa, N. vinosa, N. arthritica, N. bulbacea, N. intersculpta f. pribiloffensis, N. intersculpta f. frater pilsbry and Hemifusus tuba) were considered to be tetramine contained at high levels (more than 900 micrograms/g salivary gland), but that in one species (Buccinum opisthoplectum) appeared to be a low-molecular-weight compound differing from tetramine. It is interesting that one (Hemifusus tuba) of the seven species containing high amounts of tetramine belongs to the family Melongenidae, although the other six Neptunea species are members of the family Buccinidae, as expected from previous studies.     

A TEM study on melt-crystallized poly(butylene terephthalate)

A study was made to investigate an optimum condition for ruthenium tetraoxide staining of poly(butylene terephthalate) (PBT) with glass transition temperature as low as ca. 23 degrees C for TEM observation of melt-grown PBT crystals. The morphological study of ultrathin sections prepared based on optimum staining at 25 degrees C for 8 h revealed formation of fringed-micellar crystal nuclei in the early stage and folded-chain fringed-micellar crystals in the later stage of isothermal crystallization at 40 degrees C from melt. The fraction of chain-folded crystals increased with increasing crystallization temperature from the quantitative analysis of crystal thickness in comparison with the reported morphology using the replica method.     

Elevation of plasma levels of L-dopa in transdermal administration of L-dopa-butylester in rats

To increase delivery of L-dopa in its transdermal absorption, a new lipophilic derivative of L-dopa, L-dopa-butylester, was synthesized. An in-vitro study employing two-chamber diffusion cells, in which the excised rat abdominal skin was mounted, revealed that, in the presence of L-menthol and ethanol, L-dopa-butylester penetrated in its original form more effectively than L-dopa. L-Dopa-butylester sheets were made by immersing wiper sheets in methanol containing the compound, and then evaporating the methanol. An extraction study of the compound from the sheets revealed that its stability was maintained for at least 12 weeks. In an in-vivo cutaneous absorption study, an L-dopa-butylester sheet was attached to the shaved rat abdominal skin. A hydrogel containing L-menthol and ethanol was spread on vinyl tape, and this sheet was placed over it. In plasma, the L-dopa level rose linearly between 30 and 180 min after the cutaneous application; L-dopa-butylester was not detected. The L-dopa level was higher than that in which L-dopa was applied. These findings indicated that the lipophilic nature of L-dopa-butylester further increased its penetration through the skin, and that L-dopa-butylester that was taken up into the general circulation system was rapidly converted to L-dopa by hydrolysis in the body.     

Composition dependence of young’s modulus in Ti-V, Ti-Nb, and Ti-V-Sn alloys

The Young’s modulus of Ti-V and Ti-V-Sn alloys quenched from the β-phase region after solution treatment and cold rolling was investigated in relation to alloy compositions, microstructures, and constituent phases. The composition dependence of the Young’s modulus for quenched Ti-V binary alloys shows two minima of 69 GPa at Ti-10 mass pct V and 72 GPa at Ti-26 mass pct V. Between the two compositions, athermalω or stress-induced ω is introduced in retainedβ phase and increases Young’s modulus. That is, a low Young’s modulus is attained unless alloys undergoω transformation. In Ti-5 and -8 mass pct V, which under goα′ (hcp) martensitic transformation on quenching, the Young’s modulus further decreases by cold rolling, which can be reasonably explained by the formation ofα′ rolling texture. Comparing Young’s modulus in Ti-V binary alloy with that in Ti-Nb binary alloy, it is found that Young’s modulus is remarkably increased by athermal- or stress inducedω phase, and it shows a minimum when both martensitic andω transformation are suppressed during quenching in metastableβ alloys. The Sn addition to Ti-V binary alloy retards or suppresses athermal and stress-inducedω transformation, thereby decreasing Young’s modulus. Young’s modulus exhibits minimum values of 51 GPa in quenched (Ti-12 pct V)-2 pct Sn and of 57 GPa in cold-rolled (Ti-12 pct V)-6 pct Sn.     

The HIV-inactivating protein, cyanovirin-N, does not block gp120-mediated virus-to-cell binding

Concentrations of the potent, HIV(human immunodeficiency virus) inactivating protein, cyanovirin-N (CV-N), which completely inhibit HIV-1 infectivity, do not block the binding of soluble CD4-receptor (sCD4) to HIV-1 lysates nor the attachment of intact HIV-1 virions to several target T-cell lines. Furthermore, in contrast to the known disassociative effects of sCD4 on viral envelope glycoproteins, treatment of HIVRF with high concentrations of CV-N results in complete viral inactivation but without apparent shedding of gp120 or other ultrastructural changes. These results are consistent with the view that the virucidal effects of CV-N result from interference with step(s) in the fusion process subsequent to the initial binding of the virus to target cells.     

Reversible crosslinking in cellulose. I. Determination of mercaptan and disulfide in modified cotton

Mercaptan and disulfide contents of modified cotton fabrics could be determined by application of Leach's polarographic method for wool, with minor modification. It was found that mercaptocellulose prepared by the reaction of tosyl cellulose and potassium thiolacetate followed by alkaline hydrolysis contained considerable amounts of disulfided in addition to mercaptain. Iodometric titration of mercaptocellulose gave a higher value of mercaptan than that obtained by the polarographic method. The mercaptan and disulfide contents and methylene blue uptake of the iodine-treated samples indicate that some of the mercaptan groups further undergo oxidation to acidic groups as a result of the iodine treatment. The spatial effect in the oxidation of mercapto groups in modified cotton is briefly discussed.     

The dependence of structure and conductivity in three-dimensional phosphate ionic conductors on composition

Two series of solid solutions, Na _x Ca_(1−x)/2Zr₂(PO₄)₃ (NCZP(x), 0⩽x⩽1) and Na _x Nb_1-x Zr_1+x (PO₄)₃(NNZP(x), 0⩽x⩽1), were synthesized. They were examined by powder X-ray diffraction, infra-red (i.r.) absorption and Raman scattering. Ionic conductivities of graphite coated samples were measured. A complete series of solid solutions was formed for NCZP(x), while a second phase was found forx<0.1 for NNZP(x). The i.r. and Raman spectra of their solid solutions consistently showed the formation of PO₄ tetrahedra with different geometries. The composition dependence of conductivity is interpreted on the basis of a structural change around Na⁺.