Designing and experimentally demonstrating automatic OPS/OCS/OpenFlow network control driven by ChoiceNet provider

Interconnection between our existing optical packet and circuit integrated network (OPCInet) and an ecosystem for network service provisioning named ChoiceNet enables network service providers to provide diverse services and realize control driven by the providers. In this paper, we design and implement control interfaces for the interconnection, which enables each ChoiceNet provider to explicitly control both OPCInet- and OpenFlow-based networks by use of a single common interface with proprietary/easily modifiable message formats for all control functions. We construct an experimental setup between the USA and Japan, and demonstrate that the OPCInet and an OpenFlow-based network placed in Japan are successfully controlled by request from the ChoiceNet provider installed in the USA. We also show that the time required to complete Telnet access to the OPCInet C-plane for each control is no more than 150 ms over the long distance from the USA to Japan.     

Haptic media synchronization for remote surgery through simulation

Network delay affects the operational instability of haptic displays for telehaptic remote surgery applications using simulation. A synchronization control mechanism for haptic media reduces network delay's effects and enhances telehaptic capability in these applications.     

The Nanometer-Sized Eutectic Structure of Si/CrSi<Subscript>2</Subscript> Thermoelectric Materials Fabricated by Rapid Solidification

Nanostructuring is known to be an effective method to improve thermoelectric performance but, generally, it requires complex procedures and much labor. In the present study, self-assembled nanometer-sized composite structures of silicon (Si) and chromium disilicide (CrSi₂) were easily fabricated by the rapid solidification of a melt with a eutectic composition. Ribbon-like samples were obtained with a dominant nanostructure of fine aligned lamellae with a spacing range of 20–35 nm. The thermoelectric power factor of the ribbon was observed to be 1.2 mW/mK² at room temperature and reached 3.0 mW/mK² at 773 K. The thermal conductivity was 65% lower than that of a bulk eutectic sample. The results suggest that this method is promising for fabricating an effective nanostructure for thermoelectric performance.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.     

Effect of Vacancy Distribution on the Thermal Conductivity of Ga<Subscript>2</Subscript>Te<Subscript>3</Subscript> and Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript>

Our group has focused attention on Ga₂Te₃ as a natural nanostructured thermoelectric material. Ga₂Te₃ has basically a zincblende structure, but one-third of the Ga sites are structural vacancies due to the valence mismatch between Ga and Te. It has been confirmed that (1) vacancies in Ga₂Te₃ exist as two-dimensional (2D) vacancy planes, and (2) Ga₂Te₃ exhibits an unexpectedly low thermal conductivity (κ), most likely due to highly effective phonon scattering by the 2D vacancy planes. However, the effect of the size and periodicity of the 2D vacancy planes on κ has been unclear. In addition, it has also been unclear whether only the 2D vacancy planes reduce κ or if point-type vacancies can also reduce κ. In the present study, we tried to prepare Ga₂Te₃ and Ga₂Se₃ with various vacancy distributions by controlling annealing conditions. The atomic structures of the samples were characterized by means of transmission electron microscopy, and κ was evaluated from the thermal diffusivity measured by the laser flash method. The effects of vacancy distributions on κ of Ga₂Te₃ and Ga₂Se₃ are discussed.     

Electrical Properties of Isotropic Conductive Adhesives Composed of Silicone-Based Elastomer Binders Containing Ag Particles

The electrical properties of isotropic conductive adhesives (ICAs) with two different types of silicone-based binder containing Ag particles were examined. The ICAs were printed on glass substrates in order to prepare specimens for evaluating the electrical properties. In the case of adhesives containing a denatured silicone binder, both the curing and cooling steps in the isothermal curing process generated electrical conductivity. Adhesives that were cured at 120°C to 200°C exhibited similar values of electrical resistivity regardless of the different curing temperatures. By contrast, electrical conductivity was generated only during the cooling step when adhesives containing a dimethyl methylvinyl siloxane were isothermally cured. In this case, adhesives cured above 160°C exhibited high electrical resistivity. In evaluating the temperature dependence of the electrical resistivity, we found physical annealing to have significantly different effects on these specimens. In addition, we were able to make small sensitive variations in the properties of silicone-based ICAs by controlling the isothermal annealing and thermal cycling processes.     

Demonstration of 100 Gbps optical packet switching using header processor based on 48-bit longest prefix matching

Wire-rate packet processing and its energy saving for over 100 Gbps speed of line are major issues to be resolved in optical packet switching (OPS) networks. For that purpose, we newly develop a high-speed, deterministic-latency electronic header processor based on longest prefix matching (LPM) for searching optical packet destination addresses (OP-DAs). This paper reports the successful experimental results of electronic header processing based on LPM search of up to 48 bits and optical switching of 100 Gbps optical packets by the use of the header processor. We demonstrate 48-bit LPM-capable optical packet switching. We also demonstrate IP packet transfer and 32-bit LPM-capable optical packet switching. In the latter demonstration, the 32-bit OP-DA of optical packets is directly copied from the 32-bit destination address of Internet Protocol version 4 (IPv4) packets. This result indicates that OPS networks can be deployed with electronic IP networks by the use of integrated network operation between OPS and IP networks.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Production technology of large-area multicrystalline silicon solar cells

In 1996 a conversion efficiency of 17.1% had been obtained on 15 cm×15 cm mc-Si solar cell. In this paper, large-scale production technology of the high-efficiency processing will be discussed. Enlarging reactive ion etching (RIE) equipment size, technology of passivation, and fine contact grid with low resistance by screenprinted metallization, which is firing through PECVD SiN, have been investigated.     

Effect of catch cup geometry on 3D boundary layer flow over the wafer surface in a spin coating

Recently, development of high technology has been required for the formation of thin uniform film in manufacturing processes of semiconductor as the semiconductor instruments become more sophisticated. Spin coating is usually used for spreading photoresist on a wafer surface. However, since rotating speed of the disk is very high in spin coating, the dropped photoresist scarers outward and reattaches on the film surface. A catch cup is set up outside the wafer in spin coating, and scattered photoresist mist is removed from the wafer edge by the exhaust flow generated at the gap between the wafer edge and the catch cup. In the dry process of a spin coating, it is a serious concern that the film thickness increases near the wafer edge in the case of low rotating speed. The purpose of this study is to make clear the effect of the catch cup geometry on the 3D boundary layer flow over the wafer surface and the drying rate of liquid film.