Modified thermoelectric figure of merit estimated from enhanced mobility of [100] oriented beta-FeSi<Subscript>2</Subscript> thin film

The modification of thermoelectric figure of merit was estimated from enhanced mobility of [100] oriented beta-FeSi₂ film. beta-FeSi₂ on Si(001) substrate was prepared by molecular beam epitaxy method using an Fe source. The crystallographic orientation of beta-FeSi₂ film on Si(001) substrate was characterized by using X-ray diffraction. Using scanning electron microscopy, surface morphology and film thickness of samples were observed and estimated, respectively. The mobility of beta-FeS₂ film on Si(001) substrate were also characterized by Hall measurement at room temperature. A part of the enhancement of figure of merit was evaluated as the functions of mobility and crystallographic orientation of samples.     

A bidirectional isolated DC/DC converter as a core circuit for 3.3‐kV/6.6‐kV power conversion systems in the next generation

This paper describes a bidirectional isolated DC/DC converter considered as a core circuit for next‐generation 3.3‐kV/6.6‐kV high‐power‐density power conversion systems. The DC/DC converter is intended to use power switching devices based on SiC and/or GaN, which will be available on the market in the near future. A 350‐V, 10‐kW, and 20‐kHz DC/DC converter is designed, constructed, and tested in this paper. It consists of two single‐phase full‐bridge converters with the latest trench‐gate Si‐IGBTs and a 20‐kHz transformer with a nano‐crystalline soft‐magnetic material core and litz wires. The transformer plays an essential role in achieving galvanic isolation between the two full‐bridge converters. The overall efficiency from the DC‐input to DC‐output terminals is accurately measured to be as high as 97%, excluding gate drive circuit and control circuit losses from the whole loss. Moreover, loss analysis is carried out to estimate effectiveness in using SiC‐based power switching devices. The loss analysis clarifies that the use of SiC‐based power devices may bring a significant reduction in conducting and switching losses to the DC/DC converter. As a result, the overall efficiency may reach 99% or higher. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 163(2): 75–83, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20505     

Photoelectrochemical energy conversion system modeled on the photosynthetic process

Photo-excitable electrodes were prepared by incorporating magnesium chlorophyll (MgChl) or manganese chlorophyll (MnChl) into the thin layer of such liquid cyrstals as N-(p-methoxybenzylidene)-p-butylaniline (MBBA) and 4′-heptyl-4-cyanobiphenyl (HCB), being attached to the platinum surface. The MgChl—MBBA electrode gave the positive photo-induced potential shift in an acidic solution. In sharp contrast, the negative photo-induced potential shift was developed by the MnChl—HCB electrode in an alkaline solution. The involvement of a liquid crystal prominently enhanced the photo-response of the immobilized chlorophylls. The photoelectrochemical energy conversion system modeled on the photosynthetic process was assembled by employing the MgChl—MBBA and the MnChl—HCB electrodes as a cathode and an anode, respectively. The photocurrent derived from the system was concluded to result from the decomposition of water, since an evidence for the molecular oxygen evolution at the MnChl—HCB electrode was obtained. Furthermore, the incorporation of β-carotene was found to markedly enhance the stability of the MnChl—HCB electrode.     

Hydrogen isotope permeation from cooling water through various metal piping

In order to investigate the behavior of hydrogen isotope on the water–metal boundary, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 μm gold plating, were performed at 573 K and at 15 MPa. During the experiment, surfaces of metal piping except gold plating one were oxidized at the heavy water boundary and then deuterium would generate by the oxidation reactions. This deuterium could be detected by mass spectrometer, which monitored the inside gases of the piping under continuous evacuation. The result showed clearly that the deuterium permeated through Fe, Ni, and SS304 piping was detected as mainly deuterium gas (D₂) under continuous evacuation, though that through gold plating one could not be detected effectively. The D₂ permeation rate through Fe, Ni, and SS304 piping reached equilibrium conditions with oxide generation at D₂O–metal boundary, although concluding the transfer mechanism will require further testing and modeling activities.     

A New Neutral-Point-Clamped PWM Inverter

A new neutral-point-clamped pulsewidth modulation (PWM) inverter composed of main switching devices which operate as switches for PWM and auxiliary switching devices to clamp the output terminal potential to the neutral point potential has been developed. This inverter output contains less harmonic content as compared with that of a conventional type. Two inverters are compared analytically and experimentally. In addition, a new PWM technique suitable for an ac drive system is applied to this inverter. The neutral-point-clamped PWM inverter adopting the new PWM technique shows an excellent drive system efficiency, including motor efficiency, and is appropriate for a wide-range variable-speed drive system.     

Uncooled InAs0.09Sb0.91 photoconductors with cutoff wave- length extended to 11.5 μm

Uncooled InAsSb photoconductors were fabricated. The photoconductors were based on InAs0.05Sb0.95 and InAs0.09Sb0.91 thick epilayers grown on InAs substrates by melt epitaxy (ME). Ge immersion lenses were set on the photoconductors. The cutoff wavelength of InAs0.09Sb0.91 detectors is obviously extended to 11.5 mm, and that of InAs0.05Sb0.95 detectors is 8.3 mm. At room temperature, the peak detectivity of Dλp at wavelength of 6.8 mm and modulation frequency of 1 200 Hz is 1.08×109 cm.Hz1/2.W-1 for InAs0.09Sb0.91 photoconductors, the detectivity D at wavelength of 9 mm is 7.56×108 cm.Hz1/2.W-1, and that at 11 mm is 3.92×108 cm.Hz1/2.W-1. The detectivity of InAs0.09Sb0.91 detectors at the wavelengths longer than 9 mm is about one order of magnitude higher than that of InAs0.05Sb0.95 detectors, which rises from the increase of arsenic (As) composition in InAs0.09Sb0.91 materials.     

Effect of molecular weight distribution of mineral oils on their boiling heat transfer behaviour

The range of molecular weight distribution of mineral oils has a significant effect on lubrication because it affects the thermal behaviour of the mineral oils.In view of the fact that boiling heat transfer is one of the most typical problems relevant to thermal phenomena, an investigation of boiling heat transfer from a horizontal platinum wire to mineral oils was carried out using (i) base oils characterized by narrow-range molecular weight distributions and (ii) blended oils characterized by wide-range distributions.The objective of the present study is to clarify the relationship between the range of molecular weight distribution and the boiling heat transfer behaviour of such oils.The results obtained show marked differences between base and blended oils in their boiling heat transfer behaviour, especially with respect to the heat transfer coefficients.An explanation of these differences was attempted in terms of correlation with the results of the present authors' previous investigations of the evaporation and spreading behaviour of droplets of these oils on a horizontal heating surface, both of which showed the essential differences between the base and blended oils in the heat and mass transfer properties.     

Effects of coal rank and reaction conditions upon coprocessing coal with waste tyre

It is well known that the amount of waste tyre increases every year, and a numerous amount of waste tyre is landfilled or dumped all over the world, which causes environmental problems, such as destruction of natural places and the risk of fires. Coprocessing waste tyre and coal is considered as one of the effective processing methods of both materials. Upon coprocessing lower rank coal (Wyoming, C; 68%) with waste tyre, the synergistic effects to upgrading, such as the increase of oil yield and the decrease of residue yield, were appeared. However, the synergistic effects were not observed on coprocessing two kinds of higher rank coals with waste tyre. The reactions of coal with benzophenone were carried out to discuss the hydrogen donatability of coal. Conversion of benzophenone to diphenylmethane on the reaction with Wyoming coal was higher than those of higher rank coals. Accordingly, it was considered that the synergistic effects to upgrading upon coprocessing Wyoming coal with waste tyre were obtained owing to the enhancement of stabilization of radicals from tyre and Wyoming coal through the hydrogen donation from both tyre and Wyoming coal. The effects of reaction temperature and the amount of solvent upon coprocessing Wyoming coal with waste tyre were also discussed in this study.