Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene

We demonstrate that domain structure of single-layer graphene grown by ambient pressure chemical vapor deposition is strongly dependent on the crystallinity of the Cu catalyst. Low energy electron microscopy analysis reveals that graphene grown using a Cu foil gives small and mis-oriented graphene domains with a number of domain boundaries. On the other hand, no apparent domain boundaries are observed in graphene grown over a heteroepitaxial Cu(111) film deposited on sapphire due to unified orientation of graphene hexagons. The difference in the domain structures is correlated with the difference in the crystal plane and grain structure of the Cu metal. The graphene film grown on the heteroepitaxial Cu film exhibits much higher carrier mobility than that grown on the Cu foil.     

Hydrolytic degradation of poly(L-lactic acid): Combined effects of UV treatment and crystallization

Amorphous and crystallized poly(L -lactic acid) (PLLA) films were prepared and the hydrolytic degradation of the ultraviolet (UV)-treated and UV-nontreated films was investigated. This study reveals that the combination of UV and thermal treatments can produce the PLLA materials having different hydrolytic degradation profiles and that the UV-irradiation in the environment will affect the design of recycling process for PLLA articles. In an early stage, the degrees of hydrolytic degradation monitored by weight loss (W_loss), number-average molecular weight (M _n), and melting temperature (T _m) were higher for the UV-treated films than for the UV-nontreated films. In a late stage, the trend traced by W_loss was reversed, and the difference in the degrees of hydrolytic degradation between the UV-treated and UV-nontreated films monitored by M _n and T _m became smaller, with the exception of the degrees of hydrolytic degradation of the amorphous films traced by T _m. Also, in the early stage, the degrees of hydrolytic degradation monitored by W_loss and M _n were higher for the crystallized films than for the amorphous films. In the late stage, this trend was reversed, with the exception of the degrees of hydrolytic degradation of the UV-treated films monitored by M _n. The main factors that determined the W_loss and T _m were the molecular weight and initial crystallinty but not the molecular structures such as terminal CC double bonds and crosslinks. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Acetaminophen-Induced Rat Hepatotoxicity Based on M1/M2-Macrophage Polarization,in Possible Relation to Damage-Associated Molecular Patterns and Autophagy

Overdose of acetaminophen (APAP), an antipyretic drug, is an important cause of liver injury. However, the mechanism in the rat model remains undetermined. We analyzed APAP-induced hepatotoxicity using rats based on M1/M2-macrophage functions in relation to damage-associated molecular patterns (DAMPs) and autophagy. Liver samples from six-week-old rats injected with APAP (1000 mg/kg BW, ip, once) after 15 h fasting were collected at hour 10, and on days 1, 2, 3, and 5. Liver lesions consisting of coagulation necrosis and inflammation were seen in the affected centrilobular area on days 1 and 2, and then, recovered with reparative fibrosis by day 5. Liver exudative enzymes increased transiently on day 1. CD68⁺ M1-macrophages increased significantly on days 1 and 2 with increased mRNAs of M1-related cytokines such as IFN-γ and TNF-α, whereas CD163⁺ M2-macrophages appeared later on days 2 and 3. Macrophages reacting to MHC class II and Iba1 showed M1-type polarization, and CD204⁺ macrophages tended to be polarized toward M2-type. At hour 10, interestingly, HMGB1 (representative DAMPs) and its related signals, TLR-9 and MyD88, as well as LC3B⁺ autophagosomes began to increase. Collectively, the pathogenesis of rat APAP hepatotoxicity, which is the first, detailed report for a rat model, might be influenced by macrophage functions of M1 type for tissue injury/inflammation and M2-type for anti-inflammatory/fibrosis; particularly, M1-type may function in relation to DAMPs and autophagy. Understanding the interplayed mechanisms would provide new insight into hepato-pathogenesis and contribute to the possible development of therapeutic strategies.     

Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

Direct Electroplating of Lithium Cobalt Oxide Film on Platinum Substrate in 100°–200°C Aqueous Solution

Well crystallized, shape-formed, and electrochemically active lithium cobalt oxide (LiCoO₂) films are electroplated directly on an electron-conducting substrate in an aqueous solution using a soft solution processing that is economical, consumes less energy consuming, and is environmentally friendly. Although LiCoO₂ films are easily and economically prepared without any post-synthesis heat treatment, the estimated film properties show a possibility of using the deposited films as a cathode film for lithium rechargeable microbatteries. In addition, the soft solution processing reveals that an exact understanding of chemical reactions and the proper combination of the chemical reactions can create an advanced synthetic procedure.     

Particle velocity and solids circulation rate in a jet-spouted bed

Radial distribution of particle velocities, solids circulation rate and radial variation in bed voidage in a jet-spouted bed were investigated in a 0.2 m diameter conical-cylindrical column. The upward particle velocity is strongly dependent on gas velocity and its radial profile is the Gaussian. The solids circulation rates are of the same order of magnitude as those in a conventional spouted bed and are proportional to the gas velocity. Estimation of the variation in bed voidage in the radial direction revealed that the annulus voidage of about 0.90 was greater than the spout voidage of around 0.70. This tendency is contrary to that in a conventional spouted bed.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003     

Predicting nitrogen leaching with the modified LEACHM model: validation in soils receiving long-term application of animal manure composts

A variety of process-based models have been developed for predicting nitrogen (N) dynamics in agro-ecosystem; however, no reliable models have been validated for N leaching from soils receiving a long-term application of different types of animal manure composts. The Leaching Estimation and Chemistry Model (LEACHM) was recently modified by incorporating the basic structure of Rothamsted Carbon Model for extending its ability to describe soil organic matter decomposition and subsequent N leaching in soils rich in organic matter. We evaluate the applicability of the modified LEACHM in cropped Yellow soils receiving 10-year application of cattle or swine manure compost in addition to chemical fertilizers, where high-frequency field monitoring data of soil water contents, soil N contents and leachate N concentrations were available for the last 3 years. Particular attention was paid to determine all input parameters from independent measurements, parameterization from known soil properties or databases without optimisation to fit the measured field data. The model reasonably predicted temporal changes in the soil NH₄-N and NO₃-N contents, and inorganic N concentrations in the leachate as well as their differences due to different manure compost/chemical fertilizer applications. The simulations of leached N concentration yielded a Willmott index of agreement (IA) of 0.62–0.68, with those for soil moisture, soil nitrate content and crop N uptake all within an acceptable IA range. In view of the good performance without site-specific calibrations, the modified LEACHM appears to be a valuable tool for predicting N leaching from cropped soils receiving long-term manure compost applications.     

SOLVENT EXTRACTION OF ZINC FROM CHLORIDE MEDIA WITH SECONDARY LONG-CHAIN ALKYLAMINE

In the solvent extraction of zinc from chloride media with a secondary long-chain alkylamine, Amberlite LA-2, aggregations of ammonium chloride salt of alkylamine and zinc-complex with alkylamine and distribution equilibrium of zinc were investigated at 30 "C using n-hexane as a diluent. The ammonium chloride salt of alkylamine exists as monomeric, dimeric, trimeric and tetrameric species (BHCl, (BHCl)₂, (BHCl)₃ and (BHCl)₄, respectively). The zinc-complex exists as monomeric and dimeric species ((BH)₂ZnCl₄ and ((BH)₂ZnCl₄)₂, respectively). Zinc is extracted according to the extraction reaction in the lower loading region of zinc to alkylamine and according to the extraction reaction in the higher loading region.