Three-dimensionally ordered macroporous polyimide composite membrane with controlled pore size for direct methanol fuel cells

Three-dimensionally ordered macroporous (3DOM) polyimide matrix with different pore size (1.3 μm–200 nm) was fabricated, and its structural effect on some properties of composite membrane was investigated. The composite membrane prepared by impregnation of 2-acrylamido-2-methylpropanesulfonic acid polymer (PAMPS) exhibited swelling ratios as low as 2–3% in water or methanol solutions, compared with about 400% of PAMPS itself. The swelling ratio of composite membrane was constant regardless of the 3DOM pore size. However, methanol permeability strongly depended on the pore size. In particular, it was drastically reduced when connecting windows among macropores became less than 100 nm. On the other hand, proton conductivity changed with 3DOM matrix porosity according to Archie's law. The porosity of 3DOM matrix is basically constant even if the pore size changes. Therefore, we suppressed the methanol crossover without lowering of proton conductivity due to reducing the matrix pore size, and the selectivity (proton conductivity/methanol permeability) of 1.2 × 10⁵ S cm⁻³ s, which was one order of magnitude greater than that of Nafion^®, was achieved.     

Structural studies of enzyme-based microfluidic biofuel cells

An enzyme-based glucose/O₂ biofuel cell was constructed within a microfluidic channel to study the influence of electrode configuration and fluidic channel height on cell performance. The cell was composed of a bilirubin oxidase (BOD)-adsorbed O₂ cathode and a glucose anode prepared by co-immobilization of glucose dehydrogenase (GDH), diaphorase (Dp) and VK₃-pendant poly-l-lysine. The consumption of O₂ at the upstream cathode protected the downstream anode from interfering O₂ molecules, and consequently improved the cell performance (maximum cell current) ca. 10% for the present cell. The cell performance was also affected by the channel height. The output current and power of a 0.1 mm-height cell was significantly less than those of a 1 mm-height cell because of the depletion of O₂, as determined by the shape of the E–I curve at the cathode. On the other hand, the volume density of current and power was several times higher for the narrower cell.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Systematic packaging design tools integrating functional and environmental consequences on product life cycle: Case studies on laundry detergent and milk

This study presents systematic packaging design tools integrating functional and environmental consequences on product life cycle. To design packaging for sustainability, the trade-offs between functional and environmental aspects of packaging throughout the product life cycle should be considered. However, it is difficult for packaging designers to understand the overall trade-offs because the extent of the design consequences on the entire life cycle of packaging and its contents is unclear. We developed two tools for packaging design: the Life Cycle Association Matrix (LCAM) and the Function Network Diagram (FND). The following three steps, based on literature reviews and interviews with industrial experts, were applied. Firstly, we listed the product functions and design variables related to the functions as the attributes allocated to the product life cycle. Secondly, the attributes were connected appropriately based on causal relationships. Lastly, we identified the factors to support decision making in the packaging design procedure. As a result, the LCAM depicts the design consequences on the life cycle, and the FND determines the stakeholders affected by the design consequences. Two case studies were demonstrated to analyze the trade-offs by using our tools. In the case studies, a liquid laundry detergent bottle and a milk carton were redesigned. The tools identified the design consequences and stakeholders affected by the redesign of the usability and protective function for the detergent and milk cases, respectively. The results showed the significance of understanding the design consequences on the product life cycle by integrating the functional and environmental aspects.     

A Simple Pneumatic Loading System Controlling Stress and Strain Rates for One-Dimensional Compression of Clay

A simple but automated pneumatic loading system that can control the stress and strain rates for one-dimensional (1D) compression of clay was developed. The rate-dependency of stress-strain behaviour due to the viscous property of clay was investigated by 1D compression tests on standard-size specimens by various loading methods: 1) Standard Consolidation Tests (SCTs), stepwise increasing the axial stress two times every one day; 2) ordinary Constant-Rate-of-Strain (CRS) tests at different strain rates; 3) special CRS tests including unloading and reloading cycles with different stress amplitudes at strain rates of which the absolute value was either kept constant throughout respective tests or changed at the start of reloading; and 4) special CRS tests including a number of sustained loading (SL) during otherwise primary loading or unloading or reloading at constant strain rate. Sufficiently low strain rates were employed to ensure essentially fully drained condition. The followings were found. Despite that the newly developed pneumatic loading system is rather simple, 1D compression tests following such various loading histories as above can be performed on four types of clay rather accurately. The stress-strain behaviour of clay is significantly rate-dependent, exhibiting significant creep strains at SL stages. The creep strain rate is significantly different whether SL starts during otherwise primary loading or unloading or reloading, controlled by the magnitude and sign of the initial strain rate at the start of SL. The whole observed trends of rate-dependent stress-strain behaviour can be qualitatively explained by the non-linear three-component elasto-viscoplastic model extended to cyclic loading conditions.     

Effect of Pore–Grain-Boundary Interactions on Discontinuous Grain Growth

Pore behavior as influenced by migration of an abnormal grain boundary was studied. The pore behavior during the discontinuous growth of hot-pressed spinel (MgAl₂O₄) — whether the pore can move attached to the grain boundary — is particularly governed by the pore size and the matrix grain size. These phenomena can be understood from the interaction between the pore and the abnormal grain boundary.     

EPR study of the electronic states of β′-(BEDT-TTF)(TCNQ)

β′-(BEDT-TTF)(TCNQ) is a compound of BEDT-TTF (=ET) and TCNQ molecules aligned orthogonally with each other, forming two-dimensional sheets and one-dimensional columns of 1/4-filled π band, respectively. It is known that the metal-insulator transition occurs at 330 K at ambient pressure. We have measured the electronic spin susceptibility by means of the EPR-NMR method at 50 MHz, and the angular dependence of g-factor and line width of EPR both at Q (34 GHz) and W (94 GHz) band. We successfully confirmed that the antiferromagnetic transition occurs in ET sheets and TCNQ columns, independently.     

Switched-Capacitor Track-and-Hold Amplifiers With Low Sensitivity to Op-Amp Imperfections

This paper describes high-precision switched-capacitor (SC) track-and-hold amplifier (THA) stages. They use a novel continuous-time correlated double sampling (CDS) scheme to desensitize the operation to amplifier imperfections. Unlike earlier predictive-CDS amplifiers, the circuits do not need a sampled-and-held input signal for their operation. During the tracking period, an auxiliary continuous-time signal path is established, which predicts the output voltage during the holding period. This allows accurate operation even for low amplifier gains and large offsets over a wide input frequency range. Extensive simulations were performed to compare the performance of the proposed THAs with earlier circuits utilizing CDS. The results verify that their operation is far more robust than that of any previously described SC amplifiers