Novel fatty acid esters of (7E, 12E, 18R, 20Z)-variabilin from the marine sponge Ircinia felix

The methanolic extract of the marine sponge Ircinia felix has yielded nine novel fatty acid esters, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-22-methyltricosadienoate, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-tetracosadienoate, (7E, 12E, 18R, 20Z)-variabilin hexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 10-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 15-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 14-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 9-octadecenoate, (7E, 12E, 18R, 20Z)-variabilin octadecanoate, and (7E, 12E, 18R, 20Z)-variabilin 2,11-dimethyloctadecanoate, along with the recently described (7E, 12E, 18R, 20Z)-variabilin 11-methyloctadecanoate. The characterization of the new fatty acids (5Z, 9Z)-22-methyltricosadienoic and 2,11-dimethyloctadecanoic acids is also described. The chemical structures were determined by extensive spectroscopic, chromatographic, and chemical analyses.     

Liver phosphatidylcholine hydroperoxidation provoked by ethionine-containing choline-deficient diet in mice

It is shown that peroxidation of phosphatidylcholine (PC) is enhanced in liver of mice fed a hepatocarcinogenic choline-deficient diet containing 0.1% w/w ethionine. Mice were divided into 4 groups and fed for 3 weeks one of the following diets: choline-supplemented; choline-supplemented containing ethionine; choline-deficient; and choline-deficient containing ethionine. Phosphatidylcholine hydroperoxide (PCOOH) of liver lipids was measured by high performance liquid chromatography using a chemiluminescence detector. Mice fed a choline-deficient diet containing ethionine showed 6-fold higher PCOOH levels than the choline-supplemented control mice: the PCOOH/PC molar ratios of liver lipids were 32.3×10⁻⁵ and 5.6×10⁻⁵, respectively. In addition to this remarkable degree of lipid peroxidation in liver of mice fed the choline-deficient diet containing ethionine, we also observed a significant liver fatty infiltration, a decrease in plasma and liver α-tocopherol, and an increase in liver injury-indicative enzyme activities. Also, marker enzymes for hepatocarcinogenesis, glucose-6-phosphatase and γ-glutamyl transpeptidase were affected. These data suggest that enhanced hydroperoxidation of phosphatidylcholine may participate in hepatocarcinogenesis provoked by choline deficiency in the presence of ethionine.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Mechano-electrochemistry of a passive surface using an in situ micro-indentation test

Depassivation–repassivation of iron surfaces in boric–borate solutions were investigated by using the micro-indentation test. A pair of current peaks due to repair of the passive film following rupture of the film were observed during a series of indenter drives, i.e., loading and unloading of the indenter. The shape of the current peak depended on environmental conditions (conductivity and pH of the solution) and substrate conditions (mechanical processing history, alloyed element) as well as indentation conditions (repetition, maximum depth, and maximum load). Plastic deformation of the surface was accompanied by surface depassivation, while no depassivation occurred during the elastic deformation, indicating that the passive film on iron has a ductile property. The solution conditions did not affect the scale of depassivation but affected the rate of repassivation. Dislocations in the substrate made surface depassivation difficult but enhanced reactivity during the repassivation. The test also revealed that type-312L stainless steel has high corrosion resistance in a concentrated NaCl solution.     

Mechanical properties of silicon-doped diamond-like carbon films prepared by pulse-plasma chemical vapor deposition

Silicon-doped diamond-like carbon (Si-DLC) films were prepared by dc pulse-plasma chemical vapor deposition (CVD), using a mixture of acetylene (C₂H₂) and tetramethylsilane (TMS) as the material gas. The pulse voltage was varied from − 2 to − 5 kV, and the TMS flow ratio (TMS/(C₂H₂ + TMS)) was varied from 0 to 40%. At a pulse voltage of − 2 kV, an increase in TMS flow ratio leads to a decrease in hardness. In contrast, at a pulse voltage of − 5 kV, an increase in TMS flow ratio leads to a slight increase in hardness. The high hydrogen concentration in the films due to an increase in TMS flow ratio promotes the formation of polymeric sp³ C―H bonds, resulting in the fabrication of soft films at a low pulse voltage of − 2 kV. However, an increase in the effect of ion peening on the growth face results in the formation of hard films at a high pulse voltage of − 5 kV. Then, at a pulse voltage of − 5 kV fabricating hard Si-DLC films, an increase in TMS flow ratio leads to an increase in the silicon content in the films, resulting in a decrease in the friction coefficient. Therefore, it is clarified that Si-DLC films fabricated by dc pulse-plasma CVD under a high pulse voltage and high TMS flow ratio exhibit high hardness and a low friction coefficient. Moreover, to investigate the friction coefficient of Si-DLC films fabricated by dc pulse-plasma CVD, films deposited by dc plasma CVD were also evaluated. To obtain the same low friction coefficient, dc pulse-plasma CVD requires less TMS than dc plasma CVD. Hence, it is also clarified that Si-DLC films can be fabricated at a low cost by dc pulse-plasma CVD.     

Contact and friction between catheter and blood vessel

Therapeutic vascular catheterization techniques are sometimes hampered by the frictional forces between the blood vessel and the catheter, when contact points of the vessel are changing and deforming during the movement of the catheter. The goal of the present study was to characterize frictional interactions between the blood vessel wall and the catheter using experimental and numerical analysis. First, the frictional force was measured with an experimental apparatus that uses a ball and flattened porcine aorta to simulate frictional forces between the catheter and the vessel. Second, catheter motion was characterized by two-dimensional numerical calculations based on the experimental results. Experimental analysis demonstrated that slip occurred and that friction coefficient between the vessel and the catheter and the deformation of the specimen were small when the contact between the ball and the aorta occurred at a small angle. The compliance of the specimen in the normal direction obtained by the experiment was by far larger than that calculated according to the Hertzian contact theory. Numerical analysis shows that this difference of the parameter of the vessel, which must be determined accurately in surgical simulator, could affect the trajectory of the catheter.     

Quantitative Visualization of the Interaction between Complement Component C1 and Immunoglobulin G: The Effect of CH1 Domain Deletion

Immunoglobulin G (IgG) adopts a modular multidomain structure that mediates antigen recognition and effector functions, such as complement-dependent cytotoxicity. IgG molecules are self-assembled into a hexameric ring on antigen-containing membranes, recruiting the complement component C1q. In order to provide deeper insights into the initial step of the complement pathway, we report a high-speed atomic force microscopy study for the quantitative visualization of the interaction between mouse IgG and the C1 complex composed of C1q, C1r, and C1s. The results showed that the C1q in the C1 complex is restricted regarding internal motion, and that it has a stronger binding affinity for on-membrane IgG2b assemblages than C1q alone, presumably because of the lower conformational entropy loss upon binding. Furthermore, we visualized a 1:1 stoichiometric interaction between C1/C1q and an IgG2a variant that lacks the entire C_H1 domain in the absence of an antigen. In addition to the canonical C1q-binding site on Fc, their interactions are mediated through a secondary site on the C_L domain that is cryptic in the presence of the C_H1 domain. Our findings offer clues for novel-modality therapeutic antibodies.     

Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

EXPERIMENTAL STUDIES ON A NOVEL CHEMICAL HEAT PUMP DRYER USING A GAS-SOLID REACTION

The authors have been studying Chemical Heat Pumps (CHP) from the viewpoints of energy saving and environmental impact. The CHP can store thermal energy in the form of chemical energy by an endothermic reaction, and release it at various temperature levels during heat demand periods by exo/endothermic reactions. The authors have proposed in an earlier study a novel chemical heat pump (CHP) system for environmentally-friendly effective utilization of thermal energy in drying as a chemical heat pump dryer (CHPD). In this exploratory study, we test the effectiveness of operating the proposed CHPDs experimentally. Basic experiments on the CHPDs such as hot dry air production for convective drying are performed on lab-scale CHPD apparatuses using gas-solid reactions in calcium oxide/calcium hydroxide reactant beds. The proposed CHPDs are found to produce hot air by CHP operation for drying. The temperature levels of the produced hot air and the reaction rates/conversions are as good as in the case of hot water supply system using basically same CHP operation. The cold heat for air dehumidification is also found to be generated/recovered by the same CHPD system. The generated heat amounts can be increased by changing the operating conditions although the heat recovery must be enhanced for practical application of CHPDs.