Experimental analyses for electronic structure of barium zirconate-strontium zirconate proton-conducting solid solution

In proton-conducting oxides, analyses for their electronic structure contribute to the understanding of interactions between defects in them. In this study, electronic band alignment of (1−x)BaZr_0.8Y_0.2O_3−δ(BZY)–xSrZr_0.95Y_0.05O_3−δ(SZY) proton-conducting solid-solution system (BSZY) which has high defect concentration and the deep valence band is experimentally investigated. By using thin-film specimens for optical absorption measurements, absorption edges derived from electron transition from the valence band to the conduction band which was insensitive to the proton incorporation were clearly observed in spite of the high defect concentration. The obtained optical band gap energy increased from 5.61 to 5.89 eV with increasing x, which was consistent with a composition dependence of Zr(Y)O₆ octahedral tilting. Ultraviolet photon-yield spectroscopy (UV-PYS) measurements under vacuum condition revealed that BZY and SZY had ionization energy of 6.98 and 7.31 eV, respectively, and thus the absolute energy levels of the valence band maximum and the conduction band minimum of BSZY were experimentally clarified. We propose that the combination of the optical absorption measurements using thin-film specimens and the UV-PYS measurements under vacuum condition is effective in evaluating fundamental electronic structures of proton-conducting oxides.     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Enhancement of Anti-Tumoral Immunity by β-Casomorphin-7 Inhibits Cancer Development and Metastasis of Colorectal Cancer

β-Casomorphin-7 (BCM) is a degradation product of β-casein, a milk component, and has been suggested to affect the immune system. However, its effect on mucosal immunity, especially anti-tumor immunity, in cancer-bearing individuals is not clear. We investigated the effects of BCM on lymphocytes using an in vitro system comprising mouse splenocytes, a mouse colorectal carcinogenesis model, and a mouse orthotopic colorectal cancer model. Treatment of mouse splenocytes with BCM in vitro reduced numbers of cluster of differentiation (CD) 20⁺ B cells, CD4⁺ T cells, and regulatory T cells (Tregs), and increased CD8⁺ T cells. Administration of BCM and the CD10 inhibitor thiorphan (TOP) to mice resulted in similar alterations in the lymphocyte subsets in the spleen and intestinal mucosa. BCM was degraded in a concentration- and time-dependent manner by the neutral endopeptidase CD10, and the formed BCM degradation product did not affect the lymphocyte counts. Furthermore, degradation was completely suppressed by TOP. In the azoxymethane mouse colorectal carcinogenesis model, the incidence of aberrant crypt foci, adenoma, and adenocarcinoma was reduced by co-treatment with BCM and TOP. Furthermore, when CT26 mouse colon cancer cells were inoculated into the cecum of syngeneic BALB/c mice and concurrently treated with BCM and TOP, infiltration of CD8⁺ T cells was promoted, and tumor growth and liver metastasis were suppressed. These results suggest that by suppressing the BCM degradation system, the anti-tumor effect of BCM is enhanced and it can suppress the development and progression of colorectal cancer.     

Excess estrogen sulfoconjugation as the possible cause for a poor sign of parturition in pregnant cows carrying somatic cell clone fetuses

We conducted this study to elucidate a factor causing a poor sign of parturition and prolonged gestation, which is frequently observed in cows carrying somatic clone fetuses. Pre-partum rises in concentrations of plasma estrone and estradiol-17beta in the recipient cows pregnant with clones were subtle. By contrast, the plasma concentration of estrone sulfate in clone pregnancies increased gradually from pre-initiation of parturition induction whereas control cows that received in vivo-derived embryos showed a significant increase at parturition. Therefore, in clone pregnancies, the ratio of estrone/estrone sulfate was low during the pre-partum period compared with control. Messenger RNA expression of estrogen sulfotransferase (SULT1E1) in the placenta at parturition was significantly higher in clone pregnancies than control pregnancies and was localized in binucleate cells (BNC). SULT1E1 mRNA abundance was negatively and positively correlated with concentrations of maternal estrone and estrone sulfate at parturition respectively. Messenger RNA expressions of estrogen sulfatase (STS) and aromatase (CYP19) were similar between clone and control pregnancies and were localized in BNC and caruncular epithelial cells. STS and CYP19 mRNA abundances showed positive correlations with maternal estradiol-17beta concentration. The population of BNC in the placenta did not differ between clone and control pregnancies. Plasma cortisol concentration of vaginally delivered newborn clone calves was comparable with those of control, although cesarean section delivered clone calves showed a low concentration. These results suggest that excess estrogen sulfoconjugation is the reason for the perturbed low ratio of active to inactive estrogens and the resulting hormonal imbalance contributes to the lack of overt signs of readiness for parturition in cows pregnant with clones.     

Hydrogen absorption of catalyzed magnesium below room temperature

Hydrogen absorption of magnesium (Mg) catalyzed by 1 mol% niobium oxide (Nb₂O₅) was demonstrated under the low temperature condition even at −50 °C. The kinetic and thermodynamic properties were examined for MgH₂ with and without Nb₂O₅. By considering the remarkable absorption features at such low temperature, the essential hydrogen absorption properties were investigated under accurate isothermal conditions. As the results, the activation energy of hydrogen absorption for the catalyzed Mg was evaluated to be 38 kJ/mol, which was significantly smaller than that of MgH₂ without the catalyst. The kinetic improvement was also found on the hydrogen desorption process. On the other hand, thermodynamic properties were not changed by the catalyst as a matter of course. Therefore, the Nb₂O₅ addition mainly affects the reaction rates between Mg and hydrogen and shows the excellent catalytic effects.     

A study on the pristine and the doped polyacenic semiconductive materials

A new material supposed to have a mixed structure of polyacenic skeletons has been prepared from phenol-formaldehyde resin through the pyrolytic process. This material is air-stable, showing a wide variation of electrical conductivity with pyrolytic temperature. Moreover, it has been confirmed that the present material can be doped with an electron acceptor (iodine) and an electron donor (sodium) in a successful manner, giving rise to a maximum increase in the conductivity of more than seven and eleven orders of magnitude, respectively. The results of the electron probe X-ray microanalysis (EPMA) with respect to the doped samples have shown a uniform distribution of the dopants inside these materials.     

Gas analysis of the CVD process for high yield growth of carbon nanotubes over metal-supported catalysts

Changes in the gas composition during the methane chemical vapor deposition growth of single- and double-walled carbon nanotubes over metal-supported MgO catalysts were investigated in an attempt to increase the nanotube yield. Monitoring the gas composition by gas chromatography as a function of the reaction time provides information on the activity and lifetime of the catalyst. The degree of methane decomposition, i.e., the C-H bond dissociation, was closely related to the nanotube yield, and the Fe-Mo binary catalyst exhibited a high activity. The effects of water vapor on the catalytic nanotube growth were also studied by introducing water vapor in the inlet gas. An appropriate amount of water prolonged the lifetime of the catalyst and increased the nanotube yield by 35%.     

Structural Distortion and Compositional Gradients Adjacent to Epitaxial LiMn2O4 Thin Film Interfaces

Thin film electrode materials are key components in the development of high rate, high capacity solid‐state Li‐ion batteries. Detailed knowledge of the epitaxial film/substrate(current‐collector) interface structures, which provides insights into epitaxial growth mechanisms and the effects of microstructure on electrochemical properties, is essential for efficient materials and device design. Here we report the epitaxial growth mechanism of a typical cathodic LiMn₂O₄ thin film by exploring the detailed structural and compositional variations in the vicinity of a film/substrate interface using state‐of‐the‐art scanning transmission electron microscopy. Direct observation of atom columns shows the epitaxial film forms an atomically flat and coherent heterointerface with the substrate, but that the crystal lattice is tetragonally distorted with a measurable compositional gradient from the interface to the crystal bulk. The growth mechanism is interpreted in terms of a combination of chemical and physicomechanical effects, namely a complex interplay between the internal Jahn‐Teller distortions induced by oxygen non‐stoichiometry and the lattice misfit strain.     

Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Electromagnetic silicon MEMS resonator

We have fabricated a silicon MEMS resonator aiming at multimodal sensors, and evaluated vibration characteristics by electromagnetic drive and induced electromotive force detection. The resonance frequency of the driving voltage of 0.6 Vpp shows torsional vibration of approximately 87 kHz, and the resonance frequency is shifted toward the low‐frequency side as the driving voltage increases. Resonance characteristics due to temperature change and film stress were evaluated.