Continuous synthesis of Zn2SiO4:Mn fine particles in supercritical water at temperatures of 400-500 °C and pressures of 30-35 MPa

Sub-micron sized Zn₂SiO₄:Mn²⁺ phosphors particles were continuously synthesized in supercritical water with a flow reactor. Colloidal silica or sodium silicate was used as the Si source. Zn and Mn sources were chosen from their nitrates, sulfates, and acetates. The syntheses were carried out at temperatures from 400 to 500 °C, at pressures from 30 to 35 MPa, at NaOH concentrations from 0.014 to 0.025 M, and for residence times from 0.025 to 0.18 s. Sodium silicate formed α- and β-Zn₂SiO₄:Mn²⁺ phases regardless of the Zn and Mn sources, while colloidal silica formed phases dependent on the type of Zn and Mn sources used in addition to the use of alkali. As the reaction temperature increased, the crystallinity of α-Zn₂SiO₄:Mn²⁺ phase increased and the Mn substitution into the Zn sites of the α-Zn₂SiO₄ phase decreased. Of the conditions studied, the most highly crystalline α-Zn₂SiO₄:Mn²⁺ was produced at a temperature of 400 °C, a pressure of 30 MPa, a NaOH concentration of 0.14 M, and a residence time of 0.13 s with Zn and Mn sulfates and colloidal silica as starting materials. The α-Zn₂SiO₄:Mn²⁺ fine particles synthesized were round in shape, had an average diameter of 268 nm, and exhibited a green-emission with a peak wavelength of 524 nm.     

Thermal transients during processing of materials by very high power ultrasonic additive manufacturing

Dynamic recrystallisation at interfaces has been suggested as the bonding mechanism in the joining of metallic tapes, during very high power ultrasonic additive manufacturing. To understand the reasons for such occurrence of dynamic recrystallization, thermal transients from the interface regions were recorded during processing of aluminum alloy (3003 and 6061 series) and 11 000 copper tapes under similar conditions. Measurements in 3003 Al were also carried out for different processing parameters. Measured peak temperatures were seen to increase with increase in shear strength of the material and ultrasonic vibration amplitude. The observations have been rationalized based on interfacial heating at asperities due to adiabatic plastic deformation.     

Growth of bubbles containing plasma in water by high-frequency irradiation

Plasma was generated in water by irradiation at high frequency of 13.56 MHz, and the behavior of bubbles including the plasma was observed by a high-speed camera. The generation pattern of the bubbles was classified into four types according to liquid temperature and supplied power. Conducting the simulation, the maximum temperature in the bubble was found to be from 3500 K to 4300 K, and the decomposition of water molecule occurred. The gas in the bubble was found to become high ratio of hydrogen. The phenomenon can be regarded as a film boiling of exceptionally high heat flux.     

An immuno-wall microdevice exhibits rapid and sensitive detection of IDH1-R132H mutation specific to grade II and III gliomas

World Health Organization grade II and III gliomas most frequently occur in the central nervous system (CNS) in adults. Gliomas are not circumscribed; tumor edges are irregular and consist of tumor cells, normal brain tissue, and hyperplastic reactive glial cells. Therefore, the tumors are not fully resectable, resulting in recurrence, malignant progression, and eventual death. Approximately 69–80% of grade II and III gliomas harbor mutations in the isocitrate dehydrogenase 1 gene (IDH1), of which 83–90% are found to be the IDH1-R132H mutation. Detection of the IDH1-R132H mutation should help in the differential diagnosis of grade II and III gliomas from other types of CNS tumors and help determine the boundary between the tumor and normal brain tissue. In this study, we established a highly sensitive antibody-based device, referred to as the immuno-wall, to detect the IDH1-R132H mutation in gliomas. The immuno-wall causes an immunoreaction in microchannels fabricated using a photo-polymerizing polymer. This microdevice enables the analysis of the IDH1 status with a small sample within 15 min with substantially high sensitivity. Our results suggested that 10% content of the IDH1-R132H mutation in a sample of 0.33 μl volume, with 500 ng protein, or from 500 cells is theoretically sufficient for the analysis. The immuno-wall device will enable the rapid and highly sensitive detection of the IDH1-R132H mutation in routine clinical practice.     

A mass separation of chondrocytes from cartilage tissue utilizing an automatic crushing device

Porcine articular cartilage tissue was crushed using Multi-Beads-Shocker^™ and digested with trypsin and collagenase type II. Chondrocyte cell yield was maximized by automatic crushing for 10 s, which was 4 times that by manual dicing with a surgical blade and might be useful for the automation of the cell processing.     

Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.     

Biodesulfurization of dibenzothiophene with Rhodococcus erythropolis ATCC 53968 and its mutant in an interface bioreactor

An interface bioreactor was used in the biodesulfurization (BDS) of dibenzothiophene (DBT) with Rhodococcus erythropolis ATCC 53968. Although this strain could efficiently degrade DBT to 2-hydroxybiphenyl (2-HBP), the microbial film peeled off from the surface of the carrier (agar plate) to an organic phase (dodecane or tetradecane). To overcome this problem, a UV mutant, which strongly adhered to the carrier surface, was obtained by a new screening method. The best UV mutant (UM-021) could efficiently catalyze the BDS and the microbial film did not peel off from the surface of the carrier to tetradecane layer.     

Hydrocracking of diphenylmethane and tetralin over bifunctional NiW sulfide catalysts supported on three kinds of zeolites

Hydrocracking reactions of diphenylmethane and tetralin were carried out over three kinds of zeolites with or without NiW sulfide to discuss the roles of catalytic bifunctionality in two types of hydrocracking reactions. It was found that strong acid sites were not needed for the hydrocracking of diphenylmethane, while the conversion of tetralin required relatively strong acid sites. Ultra-stable Y zeolite with strong acidity exhibited high hydrocracking activity for both reactions. In contrast, mordenite catalysts did not show high activity for either hydrocracking, though isomerization of tetralin and excess hydrocracking to gaseous products proceeded. The superior performances of ultra-stable Y zeolite in the tetralin hydrocracking were suggested to be related to the hydrogen transfer ability. In most cases, the loading of NiW sulfide enhanced catalytic activity. In the diphenylmethane hydrocracking, the role of NiW sulfide was found to supply active hydrogen to the hydrocracking active sites on zeolite and to prevent polymerization of benzyl cations. In the tetralin hydrocracking, the dehydrogenated products from tetralin were re-hydrogenated over NiW sulfide.     

Evaluation of Performance of Diesel Particulate Filters Through Integrated Multi-Scale Computer Calculations

Wall-flow channel models and soot deposition models based on micro scale considerations are integrated into global 3D diesel particulate filter simulations. In addition, transient and steady-state simulations are combined to understand at the same time short- and long-time behaviour of the diesel particulate filter (DPF). The functionality of the simulation tool is achieved and correlations with measured data encourage the use of the model as a tool to predict DPF behaviour.     

SPRAY DRYING CHARACTERISTICS BY A CENTRIFUGAL PRESSURE NOZZLE WITH LARGE ORIFICE DIAMETER

A study was made of a centrifugal pressure nozzle with large orifice diameter (8-10 nun) for producing dry milk in capacity of 2-3 tons per hour to develop some performance data on spray distribution, drop size distribution, and capacity with changing spray drying conditions such as nozzle pressure, orifice diameter and spray angle.

Experimental results were shown as follows.

(1) A centrifugal pressure nozzle of large capacity such as 5,000- 5,500 l/hr at 150 kg/cm2 spray pressure and 110°s ray angle was designed by using the nozzle parameter Si/dedi√di/di.

(2) Atomization characteristics were greatly affected by the ratio of orifice diameter (de) to the length (L) of the nozzle core. The smaller the ratio, around 0.125, the better are the atomizing effects.

(3) The large orifice can be used at least 3,000 hr in the spray drying operation for milk without any wear in the orifice although it is only made of stainless steel.

As a result, a spray dryer of large capacity for dry milk has been operated by a mono nozzle with a large orifice without any trouble for a long time