Development of a 3-D simulation analysis system for PWR control rod drive mechanism

A 3-D virtual analysis system to analyze the motion of control rod drive mechanism (CRDM) was developed. The analysis system consists of a 3-D model established as per the actual dimensions and interfaces of CRDM parts and a routine to calculate the forces acting on the mechanism, and was verified by mock-up test using the same equipment as the actual product. The analysis system is useful for functional evaluation in maintenance or to factor out root causes in the case of malfunction of CRDM.     

SnO-SnO2 modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature

Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in special environments at room temperature is essential.Herein,the nanocomposite combining SnO-SnO2 (p-n junction) and Ti3C2Tx MXene was successfully synthesized by a one-step hydrothermal method.Because of the existence of a small amount of oxygen during the hydrothermal conditions,part of the p-type SnO was oxidized to n-type SnO2,forming in-situ p-n junctions on the surface of SnO.The hamburger-like SnO-SnO2/Ti3C2Tx sensor exhibited improved acetone gas sensing response of 12.1 (Rg/Ra) at room temperature,which were nearly 11 and 4 times higher than those of pristine Ti3C2Tx and pristine SnO-SnO2,respectively.Moreover,it expressed a short recovery time (9 s) and outstanding reproducibility.Because of the different work functions,the Schottky barrier was formed between the SnO and the Ti3C2Tx nanosheets,acting as a hole accumulation layer (HALs) between Ti3C2Tx and tin oxides.Herein,the sensing mechanism based on the formation of hetero-junctions and high conductivity of the metallic phase of Ti3C2Tx MXene in SnO-SnO2/Ti3C2Tx sensors was discussed in detail.     

Extracellular matrix of opacified anterior capsule after endocapsular cataract surgery

BACKGROUND: We determined the types and distribution of glycosaminoglycans (GAGs) and collagens, in anterior capsular opacification after endocapsular phacoemulsification and aspiration (ECPEA) and intraocular lens implantation. METHODS: Opacified anterior capsules were removed from human eyes after ECPEA. Immunohistochemical staining was performed to determine GAGs with monoclonal antibodies to chondroitin, chondroitin-4-sulfate (C4S), chondroitin-6-sulfate (C6S), dermatan sulfate (DS), and keratan sulfate (KS); collagens with monoclonal antibodies to types I, II, and III collagens; and cellular characteristics with monoclonal antibodies to vimentin, desmin, alpha-smooth muscle actin, and cytokeratin. Decorin mRNA and type I collagen mRNA were detected by in situ hybridization. RESULTS: In the capsules, the C6S, DS, KS, and types I and III collagens were similar to the chemical components found at the adhesion site of the anterior and posterior capsules after extracapsular cataract extraction, and cellular components contained vimentin, desmin, alpha-smooth muscle actin, cytokeratin, decorin mRNA, and type I collagen mRNA. CONCLUSIONS: The GAGs and collagens in opacified anterior capsule after ECPEA were similar to those found during wound healing, although KS is present in normal anterior segment tissue during development and only in the cornea postnatally. These chemical components may be produced by myofibroblast-like cells presumably transformed from lens epithelial cells.     

A xanthine oxidase inhibitor 1'-acetoxychavicol acetate inhibits azoxymethane-induced colonic aberrant crypt foci in rats

The modifying effect of dietary administration of a xanthine oxidase inhibitor 1'-acetoxychavicol acetate (ACA) present in an edible plant Languas galanga in Thailand on the development of azoxymethane (AOM)-induced colonic aberrant crypt foci (ACF) was investigated in rats. Male F344 rats were given s.c. injections of AOM (15 mg/kg body wt) once a week for 3 weeks to induce colonic ACF. They were fed the diets containing 100 or 200 ppm ACA for 5 weeks, starting 1 week before the first dosing of AOM. At the termination of the study (week 5), AOM induced 118 +/- 28 ACF/colon. Dietary administration of ACA caused significant reduction in the frequency of ACF (41% inhibition by 100 ppm ACA feeding and 37% inhibition by 200 ppm ACA feeding, P<0.01). Such inhibition might be associated with suppression of the proliferation biomarkers' expression such as ornithine decarboxylase activity in the colonic mucosa, number of silver-stained nucleolar organizer regions' protein in the colonic mucosal cell nuclei and blood polyamine content. These results indicate that ACA could inhibit the development of AOM-induced ACF through its suppression of cell proliferation in the colonic mucosa and ACA might be a possible chemopreventive agent against colon tumourigenesis.     

Poly(sulfonated phenylene)-block-poly(arylene ether sulfone) copolymer for polymer electrolyte fuel cell application

Novel poly(2-(3-sulfo)benzoyl-1,4-phenylene)-block-poly(arylene ether sulfone) copolymers (PSP-b-PAESs) were successfully synthesized by Ni(0)-catalyzed copolymerization of 2,5-dichloro-3′-sulfo-benzophenone (DCSB) and chlorobenzophenone-endcapped oligo(arylene ether sulfone). Their physical property, morphology and polymer electrolyte fuel cell (PEFC) performance were investigated compared to those of the DCSB-based random copolymers and Nafion112. PSP-b-PAES with a measured ion exchange capacity (IEC) of 1.82 meq g^?1, of which the hydrophilic/hydrophobic block lengths were evaluated as 17/8.4, showed the relatively small number of water molecules sorbed per sulfonic acid group (λ = 15) in water and the anisotropic membrane swelling with 2.4 times larger through-plane swelling than in-plane one, whereas it showed the almost isotropic proton conductivity. The PSP-b-PAES exhibited a microphase-separated structure composed of hydrophobic and hydrophilic domains, whereas the random copolymers exhibited a homogenous morphology. The PSP-b-PAES had the larger proton conductivity than the random copolymer with an IEC of 2.01 meq g^?1, especially under the low relative humidities. Even at a low humidification of 17% RH at 90 °C and 0.2 MPa, the PSP-b-PAES exhibited the high PEFC performance; namely, cell voltage of 0.69 V at load current density of 0.5 A cm^?2 and maximum output of 0.73 W cm^?2, which were much higher than those at 30% RH for the random copolymer (0.65 V and 0.51 W cm^?2) and Nafion112 (0.70 V and 0.61 W cm^?2). The PSP-b-PAES showed the fairly high durability of 750 h under PEFC operation at 90 °C in spite of the relatively low molecular weight. PSP-b-PAESs have the high potential as polymer electrolyte membrane for PEFC applications.     

Life-threatening reperfusion injury in skeletal muscle: a simple technique to control critical hyperkalemia

A 55-year-old male suffering from acute abdominal aortic occlusion due to iatrogenic aortic dissection was urgently admitted to hospital. An axillo-bifemoral bypass was constructed 6 hours from the onset of dissection. Before and after revascularization, blood samples were repeatedly obtained from a systemic artery and femoral vein. The arterial potassium concentration gradually increased, reaching 7.3 mM/L. Oliguria and arrhythmias occurred, and the left lower limb became rigid 3 hours after reperfusion. The femoral artery and vein were clamped and within 30 minutes, the arterial potassium concentration fell to 4.8 mM/L. The urine output increased. The left lower limb was amputated, and the patient survived. Immediately following revascularization, hyperkalemia may occur. Clamping of the afferent and efferent vessels is recommended as a simple and practical technique to quickly control life-threatening hyperkalemia.