The influence of side chains on formation of inclusion complexes prepared with polyolefin and cyclodextrins

We investigated the formation of inclusion complexes (ICs) between cyclodextrins (CDs) with different cavity size and polyolefin (PO) with different side chains by using Fourier transform infrared (FTIR) spectroscopy, wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry. The analysis of FTIR spectra revealed that the resultants were complexes of CD and PO, and the analysis of WAXD revealed that the molecules of CD had a channel structure due to the formation of ICs. We found that IC could not be obtained when the cavity size of CD was small for PO molecules to thread and it was too large for cross-sectional area of PO molecules. Thus, it was found that PO1 with few side chains could form IC with α-CD, and PO2 with ethyl side chain could form IC with β-CD and γ-CD, while the PO3 with 2-methyl-propyl side chain could form IC with γ-CD. These results suggest that the cross-sectional areas of polymer and the cavity size of CDs play critical roles in the formation of ICs. It is only possible to form ICs when the polymer chains can tread into cavities of CDs, and the space between the polymer and CD is suitable to provide enough intermolecular interaction to keep the structure of IC stable.     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Effects of polyglycerol esters of fatty acids and ethylene‐vinyl acetate co‐polymer on crystallization behavior of biodiesel

Biodiesel fuels (BDF) have many problems in the cold due to their crystallization properties. In particular, precipitation of large crystals of high‐melting fractions in BDF at low temperatures remarkably changes cold flow property of BDF and, thereby, it increases the values of cold filter plugging point. In this study, we evaluated polyglycerol esters of fatty acids (PGE) and ethylene‐vinyl acetate co‐polymer (EVA) as chemical additives to improve the cold flow property of palm oil‐based FAME (PFME). The results of solid fat content measurement indicate that the simultaneous addition of PGE and EVA showed synergistic effects on suppression of crystallization of PFME, however such effect was not observed when EVA was used alone. DSC thermograms indicated that the PGE additives not only decreased the crystallization temperature but also kinetically suppressed the crystal growth. Polarized light microscopy showed that the simultaneous addition of PGE and EVA led to the formation of considerably small and fine‐dispersed crystals of PFME. These results indicate that combined effects of PGE and EVA caused the formation of fine‐dispersed PFME crystals, which could improve the viscous properties of palm oil‐based BDF at relatively cold temperatures.     

Nucleation effect of inclusion complexes with different polyolefin as guest molecules on the crystallization of polypropylene

The γ‐cyclodextrin (γ‐CD) inclusion complexes (ICs) with four kinds of polyolefin (PO) as guest molecules were prepared. The crystallization behavior of isotactic polypropylene (iPP) blended with the γ‐CD and γ‐CD–PO ICs was investigated by differential scanning calorimetry, polarized optical microscopy, and light scattering. The iPP blended with the ICs was found to exhibit higher crystallization temperature (T_C), smaller spherulites, and faster crystallization rate than those of neat iPP, indicating that the ICs play a role of nucleating agent on the crystallization of iPP and induce accelerated crystallization. The IC with PO having higher T_C as guest molecules showed higher nucleation effect than the IC with PO having lower T_C as guest molecules. The results suggest that the nucleation effect of these ICs was affected by the kinds of the guest molecules. The higher T_C guest molecules could result in higher nucleation effect. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Feeding mice palm carotene prevents DNA damage in bone marrow and reduction of peripheral leukocyte counts, and enhances survival following X-ray irradiation

This study examined the effects of palm carotene feeding on DNA damage of bone marrow, recovery of peripheral leukocyte counts, and the survival of mice that received whole-body X-ray irradiation. The palm carotene was composed of alpha- and beta-carotene in a ratio of 1:3. Mice were fed either a basal diet or a carotene diet (50 mg carotene/100 g diet) for 2 weeks, then irradiated. The carotene diet was prepared by the dietary protocol that markedly enhanced the accumulation of carotene in tissues (J. Nutr. 125, 3081, 1995). DNA damage in bone marrow was evaluated by micronucleus assay using peripheral blood. When mice received X-ray (1.5 Gy), marked DNA damage in bone marrow and reduction of peripheral leukocyte count were observed. These changes were significantly attenuated in mice fed the carotene diet. In addition, X-ray (6.5 Gy)-induced survival of mice fed the carotene diet was higher than those fed the basal diet. In mice fed the carotene diet, alpha- and beta-carotene were detected in bone marrow and liver, and concentration of vitamin A in liver was about four times higher compared with that in mice fed the basal diet. These findings suggest that feeding mice palm carotene prevents radiation-induced damages by way of its antioxidant activity and/or vitamin A activity.     

Model predictive control with adaptive disturbance prediction and its application to fatty acid distillation column control

This paper describes the results of a joint university-industry study to control a fatty acid distillation sequence, which is plagued with severe disturbance problems. In order to solve the disturbance problem, a model predictive control algorithm is modified in terms of disturbance prediction. Assuming that the dynamics of the unmeasured disturbances is generated by an auto-regressive form, the dynamics of the disturbance can be adaptively identified by using time series data of prediction errors and inputs. Using an identified disturbance model with a process model, future outputs are predicted. Control actions are determined so that the predicted output is as close to the target value as possible. This modified model predictive control aglorithm is applied to a ratio control scheme for three distillation columns. The control system developed has been in use sucessfully for more than six years to produce commercial products.     

Ozone treatment of water-soluble polymers. V. Ultraviolet irradiation effects on the ozonization of polyacrylamide

Polyacrylamide was ozonized in aqueous solution (at pH 2, 7, and 11) under UV irradiation with a low-pressure mercury lamp. The breakage of the polymer chains by ozone was strongly accelerated by UV irradiation under acidic and neutral conditions. Formaldehyde was produced characteristically in the UV ozonization. From the correlation between the amount of formaldehyde and the number of breaks of polymer chains, it was presumed that one molecule of formaldehyde resulted from the chain breakage, at least under acidic conditions. The intensity of the UV absorption peak at 266 nm (285 nm in the UV ozonization at pH 2), which was presumed to be due to the carbonyl groups, namely, ketone and terminal aldehyde produced by ozonization, was very much stronger than that in simple ozonization. Oxamic acid and oxamide as end products were observed in the solution which was ozonized exhaustively under UV irradiation.     

Study on Shock Wave and Turbulent Boundary Layer Interactions in a Square Duct at Mach 2 and 4

In this paper, the outline of the Mach 4 supersonic wind tunnel for the investigation of the supersonic internal flows in ducts was firstly described. Secondly, the location, structure and characteristics of the Mach 2 and Mach 4 pseudo-shock waves in a square duct were investigated by color schlieren photographs and duct wall pressure fluctuation measurements. Finally, the wall shear stress distributions on the side, top and bottom walls of the square duct with the Mach 4 pseudo-shock wave were investigated qualitatively by the shear stress-sensitive liquid crystal visualization method. The side wall boundary layer separation region under the first shock is narrow near the top wall, while the side wall boundary layer separation region under the first shock is very wide near the bottom wall.