A multi-spectral non-local method for retrieval of boundary layer cloud properties from optical remote sensing data

A multi-spectral non-local (MSN) method is developed for advanced retrieval of boundary layer cloud properties from remote sensing data, as an alternative to the independent pixel approximation (IPA) method. The non-local method uses data at both the target pixel and neighboring pixels to retrieve cloud properties such as pixel-averaged cloud optical thickness and effective droplet radius. Radiance data to be observed from space were simulated by a three-dimensional (3D) radiation model and a stochastic boundary layer cloud model with two-dimensional (horizontal and vertical) variability in cloud liquid water and effective radius. An adiabatic assumption is used for each cloud column to model the geometrical thickness and vertical profiles of cloud liquid water content and effective droplet radius, neglecting drizzle and cloud brokenness for simplicity. The dependence of radiative smoothing and roughening on horizontal scale, optical thickness and single scattering albedo are investigated. Then, retrieval methods using 250-m horizontal resolution data onboard new generation satellites are discussed. The regression model for the MSN method was trained based on datasets from numerical simulations. The training was performed with respect to various domain averages of optical thickness and effective radius, because smoothing and roughening effects are strongly dependent on the two variables. Retrieval accuracy is discussed here with datasets independent of those used in the training, towards assessing the generality of the technique. It is demonstrated that retrieval accuracy of cloud optical thickness, which is often retrieved from single-spectral visible-wavelength data, is improved the most using neighboring pixel data and secondly using multi-spectral data, and ideally with both. When the IPA retrieval method is applied to optical thickness and effective radius, the root-mean-square relative errors can be 15-90%, depending on solar and view directions. In contrast, the MSN method has errors of 4-10%, which is smaller than IPA by a factor of 2-10. It is also suggested that the accuracy of the MSN method is insensitive to some assumptions in the inhomogeneous cloud input data used to train the regression model.     

Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

X-ray absorption near-edge structure study on positive electrodes of degraded lithium-ion battery

18650-type cylindrical cells using LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) and hard carbon as positive and negative electrode material, respectively, were fabricated and degraded by cycle tests. The capacity of the cells remained more than 95% and 85% after cycle tests at 25 and 50 °C, respectively. After the cycle tests, Li-deficient cubic phase was observed on the surface of NMC. This phenomenon should be related to the degradation mechanism of this type of cell.     

Reaction between magnesium ammine complex compound and lithium hydride

The possibility of using ammonia as a hydrogen carrier is examined for the reaction between magnesium ammine complex MgCl₂(NH₃)₆ and lithium hydride LiH. Sample was milled at low temperature of −40 °C to avoid decomposition of MgCl₂(NH₃)₆ during the milling. The effects of milling time, milling speed (revolutions per minute), and catalysts on hydrogen storage properties were investigated by thermogravimetry, thermal desorption mass spectroscopy, and X-ray diffraction experiments. Experimental results indicated that a milled composite of Mg(NH₃)₆Cl₂ and catalyzed-LiH desorbed the ∼100% H₂ gas even at 125 °C in a closed system. The reverse reaction also proceeded by separately cooling MgCl₂ at lower temperature than 100 °C and heating LiNH₂ at 300 °C in the closed system.     

Quantitative evaluation of bone resorption activity of osteoclast‐like cells by measuring calcium phosphate resorbing area using incubator‐facilitated and video‐enhanced microscopy

Quantitative evaluation of the ability of bone resorption activity in live osteoclast‐like cells (OCLs) has not yet been reported on. In this study, we observed the sequential morphological change of OCLs and measured the resorbing calcium phosphate (CP) area made by OCLs alone and with the addition of elcatonin utilizing incubator facilitated video‐enhanced microscopy. OCLs, which were obtained from a coculture of ddy‐mouse osteoblastic cells and bone marrow cells, were cultured on CP‐coated quartz cover slips. The CP‐free area increased constantly in the OCLs alone, whereas it did not increase after the addition of elcatonin. This study showed that analysis of the resorbed areas under the OCL body using this method enables the sequential quantitative evaluation of the bone resorption activity and the effect of several therapeutic agents on bone resorption in vitro. Microsc. Res. Tech, 2009. © 2008 Wiley‐Liss, Inc.     

Computed tomography reconstruction from two transmission measurements for iodine-marked cancer detection

The authors invented the transXend detector, which measures X-rays as electric currents, and then gives the energy distribution of the X-rays after an unfolding process. In a previous paper, it was shown that the material thickness distributions can be estimated with the transXend detector by using reference points plotted from the electric current ratios, such as the I ₂/I ₁ ? I ₃/I ₁ graph, where I_i denotes the electric current measured by the i-th segment of the transXend detector. In this paper, the tomographic images of iodine, aluminum, and the acrylic those surround the other two materials are reconstructed from their material thickness distributions, which are estimated from two X-ray incidence directions. The X-ray event ratios are also used to estimate the material thickness distributions.     

The friction characteristics of the journal bearing in a reciprocating compressor for refrigeration and air conditioning systems

The performance of a reciprocating compressor in refrigeration and air-conditioning systems is influenced by the lubrication characteristics of the critical sliding components. Thus, the lubrication characteristics between the crankshaft and journal bearing have to be researched in order to improve the design and performance of a reciprocating compressor. Therefore, in this study, to enhance the EER (energy efficiency ratio) to reduce power consumption, and to improve the reliability of a reciprocating compressor for refrigeration and air conditioning systems, theoretical analysis of the friction characteristics between the crankshaft and journal bearing in a reciprocating compressor is studied. The results demonstrate that frictional characteristics are significantly influenced by the clearance between the crankshaft and journal bearing and the viscosity of the lubricating oil.     

Remarkable effect of ordered mesoporous carbon support in tantalum oxide-catalyzed selective epoxidation of cyclooctene

The olefin epoxidation is one of the most important reactions in chemical industry. Metal oxide supports often cause drawbacks in catalytic activity and selectivity, which has been overcome by introducing hydrophobic organic groups onto the oxide supports. The present study utilizes ordered mesoporous carbon (CMK-3 and CMK-1) as structurally defined hydrophobic catalyst support. Well-dispersed tantalum oxides supported on the ordered mesoporous carbon were prepared. Their application in catalytic epoxidation of cyclooctene demonstrates that the tantalum oxide catalysts on the ordered mesoporous carbon supports show higher performances than those of the catalysts supported on activated carbon and ordered mesoporous silica SBA-15.     

Viewpoints to characterize precision evaluation methods in binary measurements

Precision evaluation in quantitative measurements is a thoroughly discussed topic and the established methods are in use. Many methods are proposed for qualitative data including binary data, but their effectiveness and statistical properties are not so clear.