Fabrication method for IC-oriented Si single-electron transistors

A new fabrication method for Si single-electron transistors (SETs) is proposed. The method applies thermal oxidation to a Si wire with a fine trench across it on a silicon-on-insulator substrate. During the oxidation, the Si wire with the fine trench is converted, in a self-organized manner, into a twin SET structure with two single-electron islands, one along each edge of the trench, due to position-dependent oxidation-rate modulation caused by stress accumulation. Test devices demonstrated, at 40 K, that the twin SET structure can operate as two individual SET's. Since the present method produces two SET's at the same time in a tiny area, it is suitable for integrating logic circuits based on pass-transistor type logic and CMOS-type logic, which promises to lead to the fabrication of single-electron logic LSIs     

Evaporation and condensation heat transfer with a noncondensable gas present

To evaluate the system pressure of an external water wall type containment vessel, which is one of the passive systems for containment cooling, the evaporation and condensation behavior under a noncondensable gas presence has been experimentally examined. In the system, steam evaporated from the suppression pool surface into the wetwell, filled with noncondensable gas, and condensed on the containment vessel wall. The system pressure was the sum of the noncondensable gas pressure and saturated steam pressure in the wetwell. The wetwell temperature was, however, lower than the supression pool temperature and depended on the thermal resistance on the suppression pool surface. The evaporation and condensation heat transfer coefficients in the presence of air as noncondensable gas were measured and expressed by functions of steam/air mass ratio. The evaporation heat transfer coefficients were one order higher than the condensation heat transfer coefficients because the local noncondensable gas pressure was much lower on the evaporating pool surface than on the condensing liquid surface. Using logal properties of the heat transfer surfaces, there was a similar trend between evaporation and condensation even with a noncondensable gas present.     

Clinical intestinal transplantation at the University of Pittsburgh: an update

In order to determine the outcome and associated chromosomal and structural anomalies in fetuses diagnosed in utero as having a congenital diaphragmatic hernia, we reviewed 48 consecutive cases referred to our regional Fetal Diagnostic Unit between 1988 and 1995. All babies were delivered in units with appropriate neonatal resuscitation facilities. Thirteen babies [34 per cent of those tested, confidence interval (CI) 19-49 per cent] had karyotypic abnormalities. Three had trisomies but the other nine had more complex karyotypic abnormalities including translocations, deletions, and marker chromosomes. Twenty-one fetuses (44 per cent, CI 30-58 per cent) had additional ultrasound abnormalities which affected the heart in ten cases (21 per cent). Overall, 13 babies survived (27 per cent, CI 14-40 per cent). In babies with normal chromosomes and no additional structural abnormalities the survival rate was 50 per cent (CI 25-75 per cent). Poor outcome was not predicted by early gestation at diagnosis, the hernial contents, or the presence of polyhydramnios. We conclude that parents should be counselled about prognosis with information derived from series of prenatally diagnosed diaphragmatic hernias. The investigations offered should include a detailed ultrasound examination, particularly of the heart, and karyotyping by fetal blood sampling.     

A method of improving the resolution and accuracy of rotaryencoders using a code compensation technique

A method of improving the resolution and accuracy of incremental type rotary encoders using a phase encoding and code compensation system is described. Applying this system to an optical incremental encoder whose scale pitch is 1/3600 rotation, results in a resolution of up to 1/920000 rotation, and better than ±1/300000 rotation (±0.0012°) precision is obtained     

Optical responses recorded after local stimulation in rat neostriatal slice preparations: effects of GABA and glutamate antagonists, and dopamine agonists

Congenital syphilis has been diagnosed very seldom in ancient populations. The case that we examined comes from San Jeronimo's Church (17th and 18th centuries AD; Mexico City). Coffin 43 contained an incomplete skeleton of an approximately 2-year-old infant. The pathological lesions of this skeleton include bilateral osteochondritis, diaphyseal osteomyelitis, and osteitis and/or periostitis on the long bones. The radiographic appearance depicts symmetrical osteomyelitic foci, particularly at the proximal extremity of both tibiae (Wimberger's sign). The skull exhibits hydrocephaly and periosteal changes on the vault, and the unerupted upper incisors evince dental hypoplasia and other pathological alterations reminiscent of Hutchinson's incisors. All these features strongly suggest a case of early congenital syphilis.     

Hydrogen absorption properties of Li–Mg–N–H system

Isothermal hydrogen absorption properties of the ball milled mixture of 3Mg(NH₂)₂ and 8LiH after dehydrogenation at 200 °C under high vacuum were investigated at two different temperatures of 150 and 200 °C. The pressure–composition isotherm (PCT) curve at 200 °C revealed a two-plateaus-like behavior, while the PCT curve at 150 °C showed a single-plateau-like behavior. The hydrogenated phases were composed of LiH and Mg(NH₂)₂ under 9 MPa at 200 °C, while those were observed as mixed phases of LiH and LiNH₂ at 150 °C without any trace of Mg(NH₂)₂ in XRD measurements. These results indicate that there are two-step hydrogenation processes corresponding to high and low pressures at 200 °C, but the kinetics at 150 °C is too slow to proceed with the second hydrogenating step at high pressure region.     

DELIQUORING BY EXPRESSION -PART 1 CONSTANT-PRESSURE EXPRESSION

The basic analitical method for so-called expression operation, the separation of liquid from solid-liquid systems by compression, are presented in view of the flow through compressible porous media. It has become evident that the expression mechanism consists of two flow phenomena. These types of phenomena can be analyzed by consideration of the flow mechanism through compressible porous beds, first by the filtration theory and second by the so-called consolidation theory. A simplified equation is also presented. It is shown that the simplified equation is well applicable to industrial expression problems even when the creep effects of matarials to be expressed are appreciable