Photorefractive device using self-assembled monolayer coated indium-tin-oxide electrodes

Photorefractive (PR) performances of methyl-substituted poly(triarylamine) (PTAA)-based PR device were demonstrated using chemically modified electrodes (CMEs) of self-assembled monolayer (SAM) coated indium-tin-oxide (ITO) electrodes. The SAM-ITO electrodes successfully suppressed dark current which blocks the formation of space-charge field and also causes the dielectric breakdown. The PR device consisted of composite of PTAA, 4-azacycloheptylbenzylidenemalononitrile (7-DCST), N-ethylcarbazole (ECz), and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) sandwiched between the SAM-ITO electrodes. The PR devices showed the PR performances: optical gain Γ, refractive index Δn, diffraction efficiency η, response time τ, sensitivity S, phase shift Φ, trap-limited field E_q, number density of traps N_T, and space-charge field E_SC. The remarkable response time of 11.3 ms was achieved at the low electric field of 20 V μm⁻¹, which was comparable to the response time of high-definition television (HDTV) quality of 16 ms. Our approach will widen the usage of higher mobility materials to photorefractive field and give us more favorable materials to achieve the best performance of photorefractivity in the future.     

Sintering Kinetics at Isothermal Shrinkage: Effect of Specific Surface Area on the Initial Sintering Stage of Fine Zirconia Powder

The isothermal shrinkage behaviors of fine zirconia powders (containing 2.8–2.9 mol% Y₂O₃) with specific surface areas of about 6 and 16 m²/g were investigated to clarify the effect of specific surface area on the initial sintering stage. The shrinkage of powder compact was measured under constant temperatures in the range of 1000°–1100°C. The increase in specific surface area enhanced the densification rate with increasing temperature. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. The Q of diffusion changes little but the β₀ increases with the increase in specific surface area. It is therefore concluded that the increase in the specific surface area of fine zirconia powder enhances the shrinkage rate because of an increase in the β₀ at the initial stage of sintering.     

Structural Analysis of the Complex between Penta-EF-Hand ALG-2 Protein and Sec31A Peptide Reveals a Novel Target Recognition Mechanism of ALG-2

ALG-2, a 22-kDa penta-EF-hand protein, is involved in cell death, signal transduction, membrane trafficking, etc., by interacting with various proteins in mammalian cells in a Ca²⁺-dependent manner. Most known ALG-2-interacting proteins contain proline-rich regions in which either PPYPXnYP (type 1 motif) or PXPGF (type 2 motif) is commonly found. Previous X-ray crystal structural analysis of the complex between ALG-2 and an ALIX peptide revealed that the peptide binds to the two hydrophobic pockets. In the present study, we resolved the crystal structure of the complex between ALG-2 and a peptide of Sec31A (outer shell component of coat complex II, COPII; containing the type 2 motif) and found that the peptide binds to the third hydrophobic pocket (Pocket 3). While amino acid substitution of Phe⁸⁵, a Pocket 3 residue, with Ala abrogated the interaction with Sec31A, it did not affect the interaction with ALIX. On the other hand, amino acid substitution of Tyr¹⁸⁰, a Pocket 1 residue, with Ala caused loss of binding to ALIX, but maintained binding to Sec31A. We conclude that ALG-2 recognizes two types of motifs at different hydrophobic surfaces. Furthermore, based on the results of serial mutational analysis of the ALG-2-binding sites in Sec31A, the type 2 motif was newly defined.     

Improving the photovoltaic performance of co‐evaporated Cu2ZnSnS4 thin‐film solar cells by incorporation of sodium from NaF layers

We have investigated the influence of sodium (Na) on the properties of co‐evaporated Cu₂ZnSnS₄ (CZTS) layer microstructures and solar cells. The photovoltaic performance and diode properties were improved by incorporating Na from NaF layers into the CZTS layers, while Na had a negligible effect on the microstructural properties of the layer. The best cell fabricated by using an optimal CZTS layer (Cu/(Zn + Sn) = 0.70, Zn/Sn = 1.8) yielded an active area efficiency of 5.23%. The analysis of device properties suggests that charge‐carrier recombination at CZTS/CdS interface is suppressed by intentional Na incorporation from NaF layers. Copyright © 2016 John Wiley & Sons, Ltd.     

Functional metal-porphyrazine derivatives and their polymers, 10. Secondary fuel cells based on oxygen reduction on platinum electrode modified by polymers and metal-phthalocyanines

Secondary fuel cells based on oxygen reduction of platinum electrode modified by polymers and metal-phthalocyanine (Mt = Fe(III), Co(II), Ni(II), and Cu(II)) were studied. The discharge curves for the platinum electrode modified by poly(2-vinylpyridine) (or polystyrene) and Co-phthalocyanine in 30% KOH aqueous solution, for a 30 min charge at 500 μA, followed by a 100 μA discharge showed a stable plateau at about ?0.24 V SCE (Saturated Calomel Electrode). The open circuit voltage (vs. Zn) of the cell was 1.2 V, and the discharge capacity was of 46 A · h/kg. For this battery there was no significant decay in its characteristics after more than 30 charge-discharge cycles. In Mt-phthalocyanines, the values decreased in the order of Co(II) > Fe(III) > > Cu(II) > Ni(II). From a cyclic voltammogram for the electrode modified by the polymer and Co-Pc, the cathodic reactions were discussed.     

Development of a ball step-gauge and an interferometric stepper used for ball-plate calibration

We propose a new design artifact for the calibration of ball-plates, which are used to assess the performance of coordinate-measuring machines (CMMs) and to calibrate those. Though transferring a length standard is necessary for ball-plate calibration, gauge-blocks are usually used for it. We think that the gauge-blocks are not appropriate gauges for transferring the length standard because of their shape. Therefore, we develop a new artifact, which we call a ball step-gauge. The ball step-gauge consists of a steel bar having the shape of an H and seven ceramic balls. It is rigid and lightweight. In addition, it can be calibrated precisely using special equipment with a laser interferometer; thus it can be used as a transfer length standard in the ball-plates calibration; furthermore, we discuss the uncertainties in measurements using the new interferometric equipment we developed.     

Static Coarse Grain Task Scheduling with Cache Optimization Using OpenMP

Effective use of cache memory is getting more important with increasing gap between the processor speed and memory access speed. Also, use of multigrain parallelism is getting more important to improve effective performance beyond the limitation of loop iteration level parallelism. Considering these factors, this paper proposes a coarse grain task static scheduling scheme considering cache optimization. The proposed scheme schedules coarse grain tasks to threads so that shared data among coarse grain tasks can be passed via cache after task and data decomposition considering cache size at compile time. It is implemented on OSCAR Fortran multigrain parallelizing compiler and evaluated on Sun Ultra80 four-processor SMP workstation using Swim and Tomcatv from the SPEC fp 95. As the results, the proposed scheme gives us 4.56 times speedup for Swim and 2.37 times on 4 processors for Tomcatv respectively against the Sun Forte HPC Ver. 6 update 1 loop parallelizing compiler.     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Multi-step precipitation separation system using mixture of thermosensitive polymers

Summary Multi-step precipitation separation system was developed by using aqueous mixtures of some thermosensitive polymers. The following three polymers were used here; poly(N-n-propylacrylamide), poly(N-isopropylacrylamide), and poly(N-isopropylmethacrylamide). A mixture of the three polymers showed three endothermic peaks, and the peak top temperatures were almost consistent with that of the each polymer solution. The polymers were purified by thermal precipitation to obtain fractions which can respond in narrow temperature ranges prior to use. In the case of the precipitation separation of two polymers mixtures, purities of the obtained precipitate and supernatant fractions became high comparing with the case in which the unpurified polymers were used. Parts of the polymers which were not the precipitation targets were also precipitated by the separation procedures. This was caused not only by insolubilization of the non-targeted polymers due to their phase transitions but also by their non-specific entanglement with the targeted polymers. The purities of the fractions also improved when the difference of the phase transition temperature between two polymers was large enough to avoid the coprecipitation. In the case of the precipitation separation of mixtures of the three polymers, purities of each fraction also improved when the purified polymers were used.