A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

High-accuracy measurement of 240-m distance in an optical tunnel by use of a compact femtosecond laser

A high-accuracy optical distance meter with a mode-locked femtosecond laser is proposed for distance measurements in a 310-m-long optical tunnel. We measured the phase shift of the optical beat component between longitudinal modes of a mode-locked laser. A high resolution of 50 mum at 240-m distance was obtained without cyclic error correction. The group refractive index of air is automatically extracted to an accuracy of 6 parts per million (ppm) by two-color measurement with the pulses of fundamental and second-harmonic wavelengths. Finally, an absolute mechanical distance of 240 m was obtained to within 8-ppm accuracy by use of a series of beat frequencies with the advantage of a wide range of intermode frequency, together with the results of the two-color measurement.     

Absence of normal activation of the left anterior fusiform gyrus during naming in left temporal lobe epilepsy

Patients with left temporal lobe epilepsy (TLE) often have impaired naming. We studied 13 patients with left TLE and 10 healthy control subjects with [(15)O]H2O PET during visual confrontation naming. Statistical mapping detected multiple regions of significant cerebral blood flow increases within individuals. The left fusiform gyrus was activated in nine healthy subjects, but only in two patients with TLE (a significant difference, p < 0.001). Other activation sites were more variable in healthy subjects and those with TLE. Impaired naming ability may be associated with a lack of increased cerebral blood flow in the left fusiform gyrus in TLE.     

Photorefractive device using self-assembled monolayer coated indium-tin-oxide electrodes

Photorefractive (PR) performances of methyl-substituted poly(triarylamine) (PTAA)-based PR device were demonstrated using chemically modified electrodes (CMEs) of self-assembled monolayer (SAM) coated indium-tin-oxide (ITO) electrodes. The SAM-ITO electrodes successfully suppressed dark current which blocks the formation of space-charge field and also causes the dielectric breakdown. The PR device consisted of composite of PTAA, 4-azacycloheptylbenzylidenemalononitrile (7-DCST), N-ethylcarbazole (ECz), and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) sandwiched between the SAM-ITO electrodes. The PR devices showed the PR performances: optical gain Γ, refractive index Δn, diffraction efficiency η, response time τ, sensitivity S, phase shift Φ, trap-limited field E_q, number density of traps N_T, and space-charge field E_SC. The remarkable response time of 11.3 ms was achieved at the low electric field of 20 V μm⁻¹, which was comparable to the response time of high-definition television (HDTV) quality of 16 ms. Our approach will widen the usage of higher mobility materials to photorefractive field and give us more favorable materials to achieve the best performance of photorefractivity in the future.     

Improvement of light fastness of natural dyes. Part 2: Effect of functional phenyl esters on the photofading of carthamin in polymeric substrate†

The photofading behaviour of carthamin in cellulose acetate film was investigated. A contribution from singlet oxygen to that fading was suggested. Phenyl esters containing nickel sulphonate quenching groups were prepared and the protecting effect of these compounds towards the photofading of carthamin was examined in cellulose acetate film. It is proposed that nickel sulphonate derivatives of phenyl esters can be applied as effective stabilisers against the fading of natural dyes.     

Environmental fatigue crack growth in titanium aluminides and hydrogen evolution behaviour

The influence of environment on fatigue crack growth behaviour was investigated both in nearly lamellar and in duplex titanium aluminides, and the hydrogen evolution kinetics was analysed by thermal desorption spectroscopy. The tensile strength of the duplex material decreases in the order of the extent of the water molecule content in the environment: the strength in vacuum is the highest, and decreases in the order of laboratory air and finally in water. In the case of the lamellar material, the fatigue crack growth rate in dry air is higher in the R–C crack plane orientation than that in the L–C crack plane orientation. The crack growth rate becomes higher when the crack grows as the lamellae tear. However, in the case of the duplex material, the crack growth rate in the R–C crack plane orientation is smaller in the low Δ K (Δ K _eff ) region. When cathodic charging is applied, the fatigue crack growth rate becomes higher than in dry air, particularly in the higher stress intensity factor range. The hydrogen evolution rate is increased by cathodic charging, with lower temperature peaks and higher ones. The peaks at lower temperatures are correlated with the decomposition of hydrides and de-training of hydrogen from microstructural imperfections such as microvoids. As-received materials also show an evolution peak at a higher temperature, and the evolution rate is almost independent of cathodic charging. In addition, the evolution rate at a high temperature (above 800 °C) is increased by cathodic charging. The hydrogen is considered to have an important role on fatigue crack growth acceleration.