Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Liquefaction of subbituminous coals under apparently non-hydrogenative conditions

Reactivities of several coals of different ranks have been examined in degrading extractions with aromatic solvents under apparently non-hydrogenative reaction conditions. Pyrene and A240 pitch liquefied the fusible coals in high yields and the slightly-fusible coals in moderate yields, indicating the importance of fusibility in such liquefaction processes. A240-LS pitch is a powerful solvent for slightly-fusible coals. Considerable amounts of pyridine- or THF-soluble fractions were produced especially with A240-LS pitch. A240 pitch is a better solvent than pyrene for some slightly-fusible coals. However, the extent of depolymerization of liquefied coal, pyridine- or THF-solubility, was definitely inferior. Yields of such fractions are higher for lower-rank coals. The mechanism of coal liquefaction under apparently non-hydrogenative conditions is discussed with emphasis on the stabilization of thermal fragments derived from the coal.     

Aggregation arrestant pheromone of the German cockroach,Blattella germanica (L.) (Dictyoptera: Blattellidae): Isolation and structure elucidation of blattellastanoside-A and -B

The aggregation pheromone of the German cockroach,Blattella germanica, consists of attractant and arrestant, which can be detected by olfactometer and choice-chamber assay, respectively. Both were extracted from the frass-contaminated filter paper being used as a shelter. They were separated by solvent partition withn-butanol and water. The arrestant from then-butanol phase was purified by open column chromatography and then successive HPLC isolated two major arrestant components. Spectral evidence from SI-MS, HR-EI-MS, and NMR experiments with pulse techniques provided possible structures as 1-(6-chloro-4,5-epoxy-5-stigmast-3-yl)--d-glucopyranoside and 1-(6-chloro-5-hydroxy-5-stigmast-3-yl)--d-glu-copyranoside, denoted as blattellastanoside-A and blattellastanoside-B, respectively. They represented arrestant activity as median effective doses (ED₅₀) at 0.044 (A) and 3.2 (B) nmol on 1.0 cm² of Whatman No. 1 filter paper.     

One-step formation of ethyl methyl ketone from 1-butene and water on ultrastable Y-type zeolite catalyst

Proton exchanged ultrastable Y-type zeolite with silica/alumina = 40 showed a pronounced catalytic activity for the formation of ethyl methyl ketone directly from 1-butene and water. The formation rate of ethyl methyl ketone was much higher than those on MoO₃-based catalysts in the oxidation of 1-butene by oxygen. It was suggested that the basic site necessary for the formation of ethyl ketone directly from 1-butene and water would be the pentacoordinated Al.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

One-Step Synthesis of Luminescent Nanoparticles of Complex Oxide, Strontium Aluminate

An organic aqueous solution of metal acetylacetonate precursors was subjected to spray pyrolysis in order to fabricate SrAl₂O₄:Eu (SAO) nanoparticles. Non-agglomerated luminescent SAO nanoparticles, having a spherical shape with a size of 10–30 nm, were achieved in a single step, while only submicrometer-sized SAO particles were obtained from the conventional ultrasonic pyrolysis of the metal nitrates. Without any post-annealing process, the as-prepared SAO nanoparticles were observed to exhibit a strong photoluminescence, which is comparable with that of the submicrometer-sized SAO particles. A mechanism for the formation of the nanoparticles is also discussed.     

Characterization of alicyclic polyimides based on cyclobutane ring dianhydride and aromatic diamine

Films of alicyclic polyamic acid and polyimide containing cyclobutane ring in dianhydride moiety and aromatic ring with p- or m-linkages in diamine moiety were characterized by infrared (IR) spectroscopy, dynamic viscoelasticity, differential-scanning calorimetry (DSC), density, and wide-angle X-ray diffraction analyses. Partially and fully imidized polyimides were obtained by varying the imidization temperature, e.g., 150°C, 250°C, and 350°C. It was found from the results of IR spectra, dynamic viscoelasticity, and DSC measurements that the imidization of alicyclic polyamic acid was reduced at about 150°C and needed a higher imidization temperature than aromatic polyamic acid. Alicyclic polyimide with m-linkage in the diamine moiety had a higher density and a much more ordered structure than with p-linkage. © 1994 John Wiley & Sons, Inc.     

Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders

To synthesize Ti₃SiC₂ samples, pulse discharge sintering (PDS) technique was utilized to sinter elemental powders of Ti/Si/C with stoichiometric and off-stoichiometric ratios in a temperature range of 1200–1500 °C. The results showed that high purity Ti₃SiC₂ could not be obtained from the Ti/Si/C powder with molar ratio of 3:1:2, and Ti₃SiC₂ preferred to form at relatively low sintering temperature for a short time. When 5Ti/2Si/3C and 3Ti/1.5Si/2C powders were sintered for 15 min, the TiC content was respectively decreased to 6.4 and 10 wt.% at 1250–1300 °C. The corresponding relative density of the samples sintered from 5Ti/2Si/3C powder was calculated to be as high as 99% at the temperature above 1300 °C. It is suggested that low-temperature rapid synthesis of Ti₃SiC₂ would be possible through the PDS technique, provided that the composition of the starting powders should be adjusted to be off-stoichiometric ratio from 3:1:2.     

ARCOR,a new photolithography technique with antireflective coating on resist

The multiple interference effect is one of the major causes of the fluctuation in critical dimension control (CD) and in mark detection for alignment. Suppressing this effect is critical for future photolithography. We propose a new photolithography technique called anti reflective coating on resist (ARCOR), which improves linewidth accuracy and overlay accuracy by suppressing multiple interference. ARCOR consists of relatively simple processes: A clear antireflective film is spun onto the resist prior to the mark detecting for alignment and exposure. The film is subsequently removed and the resist developed in the conventional way. ARCOR differs from ARC, which suppresses the reflection at the resist/substrate interface. ARCOR suppresses the reflection at the air/resist interface. ARCOR allows mark detection and exposure without light intensity-loss and multiple interference. The experiments mainly examine polysiloxane and perfluoroalkylpolyether as ARCOR materials. It is shown that linewidth accuracy can be improved from 0.3 to 0.03 μm. The signal-to-noise ratio of the alignment signal is drastically improved, and the overlay error is about half that of the conventional method. ARCOR is also effective for directly measuring the reflectivity at the resist/substrate interface, which is a key parameter of the multiple interference effect and the halation. Using ARCOR and a thin resist film, the measured ratio of reflected light to incident light indicates the reflectivity at the resist/substrate interface. Because, the probe light does not reflect off the resist surface and the intensity-loss at the resist surface is suppressed. With perfluoroalkylpolyether film, the measurement error is ～ 1.5%.