Metabolism of tetramethrin isomers in rat: IV. Tissues responsible for formation of reduced and hydrated metabolites

1. To identify the sites of formation of the reduced metabolites, 3-hydroxy-cyclohexane-1,2-dicarboximide (3-OH-HPI-1 and -2), 1,2-cyclohexanedicarboxylic acid (TCDA) and 1-hydroxy-1,2-cyclohexanedicarboxylic acid (1-OH-HPA), in rat treated with 14C-labelled (1RS, trans)-tetramethrin, [3,4,5,6-tetrahydrophthalimidomethyl (1RS, trans)-chrysanthemate], bile-duct cannulated animals were orally or intravenously administered 14C-labelled 3,4,5,6-tetrahydrophthalimide (TPI) or 3,4,5,6-tetrahydrophthalic acid (THPA), precursors of these metabolites, and bile, urine and faeces were collected for analysis. 2. 3-OH-HPI-1 and 3-OH-HPI-2, which are cis-form reduced metabolites, and 1-OH-HPA were detected in bile and urine samples of the bile-cannulated rat treated intravenously and orally with 14C-labelled TPI, indicating their formation in tissues or blood. TCDA, a trans-form reduced metabolite, was not detected in bile, urine or faeces of the bile-cannulated rat treated intravenously with 14C-THPA, but was found in the faeces after oral application, indicating formation in the gastrointestinal tract. 3. To clarify whether 1-OH-HPA is produced from THPA via TCDA (hydroxylation via reduction) or by direct addition of H2O to its double bond (hydration), rats were orally administered 14C-labelled TCDA, and metabolites in urine and faeces were analysed. The observed lack of 1-OH-HPA indicated formation by direct addition of H2O to the double-bond of THPA. 4. To specify which tissues form reduced and hydrated metabolites, in vitro metabolism studies were carried out. Reduction to the cis-form was found to take place in blood cells, reduction to the trans-form took place in the gastrointestinal tract contents, and hydration took place in the liver and the intestinal tract contents.     

An Electronic Approach to Materials Design

A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα cluster method. In this paper recent progress in this approachis reviewed. In particular     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

The oxidation properties of fourth generation single-crystal nickel-based superalloys

The fourth-generation nickel-based single-crystal superalloys, which contain large amounts of refractory metals for strengthening and platinum group metals for topologically close-packed phase prevention, show excellent high-temperature strength. However, these alloying elements seem to decrease high-temperature oxidation resistance. In this study, nickel-based superalloys with various amounts of tantalum, rhenium, and ruthenium were examined in isothermal and cyclic exposures at 1,100°C to investigate the effect on the oxide growth rate and resistance to scale spallation. Ruthenium and rhenium were found to degrade the oxidation resistance by the vaporization of their oxide. Tantalum-rich oxide in the spinel layer acts to stabilize ruthenium and rhenium oxide in the scale. The addition of hafnium and yttrium is effective in improving the oxidation resistance of ruthenium-containing nickel-based superalloys.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

Effect of strain rate on microstructural change in deformation of the ultrafine grained (UFG) aluminum produced by severe plastic deformation (SPD) was studied. Commercial purity 1100 aluminum sheets were highly strained up to an equivalent strain of 4.8 by the Accumulative Roll-Bonding (ARB) process at ambient temperature. The ARB-processed sheets were found to be filled with pancake-shaped ultrafine grains surrounded by high-angle grain boundaries. The ultrafine grains had a mean grain thickness of 200 nm and a mean grain length of 1100 nm. The ultrafine-grained aluminum sheets were deformed at various strain rates ranging from 2 to 6.0×10⁴ s⁻¹ by conventional rolling, ultra-high-speed rolling, and impact compression. High-speed plastic deformation generates a large amount of heat, inducing coarsening of the ultrafine grains during and after deformation. On the other hand, it was also suggested that high-speed plastic deformation is effective for grain-subdivision, in other words, ultra-grain refinement, if the effect of heat generation is extracted.     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008