Condensation of organic binary mixtures flowing horizontally in a horizontal tube bundle

Both heat and mass transfer in the gas phase and heat transfer in the liquid phase are examined experimentally for film condensation of organic binary mixtures such as ethanol-water and methanol-water. Experimental results on the average heat flux, vapor-liquid interface temperature and liquid-phase Nusselt number are compared with analytical solutions based on stagnant film theory and heat-transfer relationships for film condensation from a pure vapor. Experimental heat transfer results agree well with the analytical solutions, except that the experimental liquid-phase Nusselt numbers under conditions of low mass fraction of water are considerably higher than predicted by the analytical solutions. This high value of the liquid-phase Nusselt number is considered to be caused by dropwise condensation in the liquid phase. However, its effect on the tube bundle is not so remarkable compared with that in gravity-controlled condensation on a vertical surface. This is considered to be caused by the condensate inundation effect. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(6): 342–361, 1996     

Effects of Aliphatic Alcohols on Formation of Cyclodextrin from Soluble Starch by Bacillus macerans Cyclodextrin Glucanotransferase

Effects of aliphatic alcohols such as ethanol, n-butanol and n-decanol on the formation of cyclodextrin (CD) from soluble starch by Bacillus macerans cyclodextrin glucanotransferase (CGTase) were experimentally studied at 50°C and pH 6.0. The addition of such aliphatic alcohols caused an increase in α-CD yield, which extent was remarkable in n-butanol. From the incubation of α-CD with CGTase, such an increase was found to be due to a restriction on further transglycosylation of α-CD into β-CD by CGTase imposed by the aliphatic alcohols.     

Effect of Talc Size on Surface Roughness and Glossiness of Polypropylene Injection Molding Application to Automotive Plastics

Talc-containing polypropylene (PP) resin is extensively employed in automobiles. Herein, considering the microstructure transfer process in injection molding, the effect of the talc's dispersibility and particle size on this process and its impact on the gloss level of the product were investigated. Results show that a fine unevenness of about several micrometers was self-formed by the shrinkage of PP in nontransferred areas due to the blending of talc. Additionally, the amount of self-formed unevenness tended with an increase in the average particle size of talc. Furthermore, due to PP shrinkage and different densities of talc, it was observed that a fine tiger-stripe pattern was self-formed using special molds with modified microstructure. This self-formed fine unevenness changes the gloss level owing to the diffused light reflection effect. This study proposes controlling this change by controlling the average particle size of talc and structure of the mold. POLYM. ENG. SCI., 60:132–139, 2020. © 2019 Society of Plastics Engineers     

Synthesis of polyamide-hydroxyapatite nanocomposites

Simultaneous one-pot syntheses of PA66 and HAp were carried out by extracting H₂O and CO₂ from PA66 monomers and HAp raw materials, respectively, resulting in the formation of a polyamide (PA) 66-hydroxyapatite (HAp) nanocomposite. During the process, a spherical nano-sized HAp particle was precipitated following dissolution of micro-sized CaHPO₄・2H₂O. The PA66 monomers were subsequently adsorbed onto the generated HAp product. Some of the adsorbed PA66 monomers formed a bound polymer on HAp, and an increase in the adhesiveness of the PA66-HAp interface was observed as the polymerization progressed. During this process, the synthesis of a nanocomposite from a micro-sized raw material and creation of an autonomous strong interface between the matrix and filler was achieved. In addition, the shape of the resultant HAp was controllable and could be modified to needle shape by the addition of F⁻ and Mg²⁺ ions to the raw material. HAp could also be changed to plate shape via octa-calcium phosphate (OCP). Notably, during the synthesis, the filler shape of the nanocomposite could be controlled to 0D (particle), 1D (needle), and 2D (plate).     

Dynamic Stabilization of DNA Assembly by Using Pyrrole-Imidazole Polyamide

We used N-methylpyrrole (Py)-N-methylimidazole-(Im) polyamide as an exogenous agent to modulate the formation of DNA assemblies at specific double-stranded sequences. The concept was demonstrated on the hybridization chain reaction that forms linear DNA. Through a series of melting curve analyses, we demonstrated that the binding of Py−Im polyamide positively influenced both the HCR initiation and elongation steps. In particular, Py−Im polyamide was found to drastically stabilize the DNA duplex such that its thermal stability approached that of an equivalent hairpin structure. Also, the polyamide served as an anchor between hairpin pairs in the HCR assembly, thus improving the originally weak interstrand stability. We hope that these proof-of-concept results can inspire future use of Py−Im polyamide as a molecular tool to modulate the formation of DNA assemblies.     

Numerical Simulation of Innovative Operation of Blast Furnace Based on Multi-Fluid Model

To date ,blast furnace operators have a relative-ly good understanding of internal mechanisms ,andno longer treat blast furnace as a“black box”. Forthe blast furnace , however , one of the most com-plex metallurgical units inthe field of chemical engi-neering,the complexity keeps proliferating with theadoption of newtechnologies ,such as high rate in-jection of pulverized coal ,effective use of carbona-ceous andferrous materials ,and so on.If merely bydirect instrumentation and empirical kno…     

Modifying ability of Ql-free coal-tar pitch to develop optical anisotropy in co-carbonizations

Carbonization properties of a Ql-free coal-tar pitch (CTP-ASM) prepared by selective precipitation were studied to evaluate it as a source for needle-coke. Its modifying ability for production of needlecoke in co-carbonizations with principal carbonizing substances which gave cokes of mozaic texture in single carbonizations was estimated by changing mixing ratios. The shape and size of the anisotropic optical texture in the co-carbonized coke were measured by point counting. CTP-ASM and Ashland A240, of eight additives, had the highest modifying ability in the co-carbonizations with Khafji vacuum residue. Both contained ca. 6% benzene-insolubles (Bl), and had f_a values of ≈0.9. Other additives of either lower or higher Bl or f_a showed less modifying ability. The modifying susceptibility of principal carbonizing substances varies with their structure and properties. Based on a systematic investigation of co-carbonizations the compatibility between a principal carbonizing substance and an additive is discussed from a viewpoint of their structural parameters.     

Strength and Phase Stability of Yttria-Ceria-Doped Tetragonal Zirconia/Alumina Composites Sintered and Hot Isostatically Pressed in Argon–Oxygen Gas Atmosphere

Yttria-ceria-doped tetragonal zirconia (Y,Ce)-TZP)/alumina (Al₂O₃) composites were fabricated by hot isostatic pressing at 1400° to 1450°C and 196 MPa in an Ar–O₂ atmosphere using the fine powders prepared by hydrolysis of ZrOCl₂ solution. The composites consisting of 25 wt% Al₂O₃ and tetragonal zirconia with compositions 4 mol% YO_1.5–4 mol% CeO₂–ZrO₂ and 2.5 mol% YO_1.5–5.5 mol% CeO₂–ZrO₂ exhibited mean fracture strength as high as 2000 MPa and were resistant to phase transformation under saturated water vapor pressure at 180°C (1 MPa). Postsintering hot isostatic pressing of (4Y, 4Ce)-TZP/Al₂O₃ and (2.5Y, 5.5Ce)-TZP/Al₂O₃ composites was useful to enhance the phase stability under hydrothermal conditions and strength.     

Leak detection in pipe using transient flow and genetic algorithm

An inverse transient method with genetic algorithm (GA) was applied to leak detection in pipeline. Transient flow caused by valve operation was calculated using the characteristics method. The location and discharge of leak were determined so that the difference of the calculated pressure may be minimized from the reference pressure calculated under a given leak condition. Calculations were done for the leak at one and two locations in pipeline. Furthermore, the effect of noise in pressure data was discussed, and the leak locations and leak discharges can be predicted precisely even in the case of noisy data. This paper was presented at the 9^th Asian International Conference on Fluid Machinery (AICFM9), Jeju Korea, October 16–19, 2007.     

PMMA-SiO2杂化材料对天然橡胶的增强作用

提取了活性硅烷醇,用自由基共聚合法成了含硅高聚物,分析了SiO2含量对硫化天然橡胶力学性能的影响。