Dependence of Seebeck coefficient on a load resistance and energy conversion efficiency in a thermoelectric composite

The thermo-emf ΔV and current ΔI generated by imposing the alternating temperature gradients (ATG) at a period of T and the steady temperature gradient (STG) on a thermoelectric (TE) composite were measured as a function of t, where t is the lapsed time and T was varied from 60 to or ∞ s. The STG and ATG were produced by imposing steadily and alternatively a source voltage V in the range from 1.0 to 4.0 V on two Peltier modules sandwiching a composite. ΔT, ΔV, ΔI and V_P oscillate at a period T and their waveforms vary significantly with a change of T, where ΔV and V_P are the voltage drops in a load resistance R_L and in resistance R_P of two modules. The resultant Seebeck coefficient |α| = |ΔV|/ΔT of a composite under the STG was found to be expressed as |α| = |α₀|(1 − R_comp/R_T), where R_T is the total resistance of a circuit for measuring the output signals and R_comp is the resistance of a composite. The effective generating power ΔW_eff has a local maximum at T = 960 s for the p-type composite and at T = 480 s for the n-type one. The maximum energy conversion efficiency η of the p- and n-type composites under the ATG produced by imposing a voltage of 4.0 V at an optimum period were 0.22 and 0.23% at ΔT_eff = 50 K, respectively, which are 42 and 43% higher than those at ΔT = 42 K under the STG. These maximum η for a TE composite sandwiched between two Peltier modules, were found to be expressed theoretically in terms of R_P, R_T, R_L, α_P and α, where α_P and α are the resultant Seebeck coefficients of Peltier modules and a TE composite.     

Ultraviolet bonding of perfluoropolyethers to carbon surfaces investigated using quantum chemical methods

For improving the tribological performance of hard disk drives, nanometer-thick perfluoropolyether (PFPE) lubricant films are generally treated with ultraviolet (UV) irradiation to bond them to the carbon overcoats of the disks. By modeling UV irradiation as an electron emission and attachment process, we investigate the UV bonding of nonfunctional PFPE Z and functional PFPE Zdol to hydrogenated and nitrogenated carbon surfaces with quantum chemical methods. Our calculation results show that, upon electron attachment, Z dissociates at its main chain to two fragments terminated by CF₂CF₂ and CF₂O groups, whereas Zdol dissociates to a hydrogen fluoride and a fragment. The perfluoromethoxy oxygen in one of the Z fragments and the carbon radical and the hydrogen-truncated end group in the Zdol fragment interact strongly with sp² and oxidized sites on carbon surfaces. Imine moieties on the CNx surface also contribute considerably to the UV bonding of Zdol.     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Microwave dielectric properties and crystal structures of Mg0.7Al2.2O4 and Mg0.4Al2.4O4 ceramics with defect structures

Mg_0.7Al_2.2O₄ and Mg_0.4Al_2.4O₄ ceramics with cation vacancies were synthesized using the molten salt method, and the relationships between the microwave dielectric properties and crystal structures of these materials were investigated. The ²⁷Al NMR spectra of these ceramics indicate that the preferential occupation of tetrahedral sites by Al³⁺ cations was enhanced by the introduction of cation vacancies. The λ values of Mg_0.7Al_2.2O₄ and Mg_0.4Al_2.4O₄ ceramics fired at 1600°C, which correspond to the fraction of Al³⁺ cations in tetrahedral sites, were 0.37 and 0.60, respectively. Crystal structure refinements using the Rietveld method suggest that cation vacancies are preferentially located at octahedral sites in both ceramics. The ε_r and Q·f values of a Mg_0.7Al_2.2O₄ ceramic fired at 1600°C were 7.7 and 201 111 GHz, respectively, while those of a Mg_0.4Al_2.4O₄ ceramic fired at 1600°C were 7.5 and 232 301 GHz, respectively. These data demonstrate that the preferential occupation of tetrahedral sites by Al³⁺ cations following the introduction of cation vacancies enhances the Q·f value.     

Cell density-dependent DNA fragmentation and its suppression by heparin in primary culture of adult rat hepatocytes

We show here that the internucleosomal DNA fragmentation, which is a biochemical hallmark of apoptosis, was induced in a cell density-dependent manner in primary culture of adult rat hepatocytes. This DNA fragmentation could be suppressed by a gene expression inhibitor, indicating the active nature of this process. Moreover, the viability changes in high and low cell density cultures showed a tendency corresponding with the incidence of the DNA fragmentation in them. These results suggest that in hepatocytes there may be a cell density-dependent apoptosis mechanism. In this report, we also show that heparin could suppress this DNA fragmentation with high specificity, and the cell death to some extent.     

A novel DNA polymerase family found in Archaea

One of the most puzzling results from the complete genome sequence of the methanogenic archaeon Methanococcus jannaschii was that the organism may have only one DNA polymerase gene. This is because no other DNA polymerase-like open reading frames (ORFs) were found besides one ORF having the typical alpha-like DNA polymerase (family B). Recently, we identified the genes of DNA polymerase II (the second DNA polymerase) from the hyperthermophilic archaeon Pyrococcus furiosus, which has also at least one alpha-like DNA polymerase (T. Uemori, Y. Sato, I. Kato, H. Doi, and Y. Ishino, Genes Cells 2:499-512, 1997). The genes in M. jannaschii encoding the proteins that are homologous to the DNA polymerase II of P. furiosus have been located and cloned. The gene products of M. jannaschii expressed in Escherichia coli had both DNA polymerizing and 3'-->5' exonuclease activities. We propose here a novel DNA polymerase family which is entirely different from other hitherto-described DNA polymerases.     

Detection of Verotoxigenic Escherichia coli O157 and O26 in food by plating methods and LAMP method: a collaborative study

In order to establish a rapid and sensitive method for the detection of Verotoxigenic Escherichia coli O157 and O26, a collaborative study was conducted focusing on a comparison of the efficiency of loop-mediated amplification (LAMP) assay targeting the Verocytotoxin (also called Shiga toxin) gene, utilizing a direct plating method and a plating method with immunomagnetic separation (IMS-plating method) using various agar media. In combination with enrichment with the modified EC supplemented with novobiocin, E. coli O157 was detected in most samples of ground beef and alfalfa sprouts by LAMP assay, the direct plating method and the IMS-plating method. E. coli O26 was detected in approximately 100% of the food samples by LAMP assay. However, the IMS-plating and direct plating methods recovered 80 and 50% in ground beef samples, respectively. As a result, it was demonstrated the LAMP assay is superior to the IMS-plating method. Based on these results, it appears LAMP assay is effective as a screening assay to detect E. coli O157 and O26 from positive samples.     

Environmentally friendly coloured materials: cellulose/titanium dioxide/inorganic pigment composite spherical microbeads prepared by viscose phase-separation method

In order to develop environmentally friendly coloured materials, cellulose composite spherical microbeads hybridised with titanium dioxide (TiO₂) particles and inorganic pigment were prepared by a phase-separation method using viscose and an aqueous solution containing sodium polyacrylate. Findings regarding the relationships between cellulose xanthate and the electronic characteristics of TiO₂ particles used in the cellulose/inorganic material composite sphering process are also reported. These findings suggest that the location of TiO₂ particles in cellulose microbeads is related to electrical repulsion between the xanthate (CSS⁻) group and TiO₂. The use of TiO₂ powder as colour pigment is limited, as its colour is white. The cellulose composite spherical microbeads covered with TiO₂ and Fe₂O₃ particles were developed by addition of iron oxide (Fe₂O₃). Their surfaces were viewed by laser microscope and using SEM images. These composite microbeads retained the photocatalytic property of TiO₂. Cellulose/TiO₂/Fe₂O₃ composite spherical microbeads with both colour function and photocatalytic properties were successfully prepared.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.