Improvement of sensing characteristics of self‐sensing active magnetic bearings

A winding‐current interference model of self‐sensing magnetic bearings (AMBs) and an improvement technique of position‐sensing characteristics are proposed. In the self‐sensing AMB systems, the electromagnets work not only as actuators suspending the rotor but also as position sensors. The self‐sensing position signal, however, includes errors because of nonlinearity of the magnetic circuits. In the proposed model, the current is directly transmitted to the self‐sensing position signal. This transmission means degradation of the self‐sensing characteristics. This winding‐current interference to the self‐sensing signal is reduced by the proposed compensation method. The characteristics of the proposed self‐sensing method agree well with a reference sensor signal up to over 1 kHz. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(2): 70– 77, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20732 Copyright © 2004 Wiley Periodicals, Inc.     

FDTD simulation of nonlinear ultrasonic pulse propagation in ESWL using equations including Lagrangian

A new FDTD algorithm is proposed for analyzing ultrasonic pulse propagation in the human body, a problem connected with ESWL (extracorporeal shock wave lithotripsy). In this method, we do not use plane wave approximation but directly employ the original equations, taking into account the Lagrangian to derive new FDTD algorithms. This method is applied to an experimental setup and its numerical model that resembles an actual treatment situation in order to compare the sound pressure distributions obtained numerically with those obtained experimentally. The present method is shown to give clearly better results than the earlier method, from the point of view of the numerical reappearance of a strongly nonlinear waveform. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 29–36, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20819     

Photo‐reductive fading of disperse azo dyes on nylon substrate: thermochemical analyses of reactions of photo‐induced radicals using the semiempirical molecular orbital method†

When the excited triplet states of disperse azo dyes with nitro groups abstract hydrogen to generate hydrazinyl (from azo groups) and nitrosyl hydroxide radicals (from nitro groups), both the radicals as H‐acceptors carry out azo scission, conversion to nitrogen dioxide via disproportionation reactions and self‐decomposition via rearrangement. A kinetic equation was formulated by the sum of these reactions, which describes the initial rates (K_PA) of reductive fading. The K_PA values were controlled by the rate constants of the reactions of hydrazinyl and nitrosyl hydroxide radicals as H‐acceptors, which were estimated by thermochemical analyses of the reactants, intermediates and end products using the semiempirical molecular orbital PM5 method, and by the concentrations of the reactants: H‐acceptors and H‐donors. The K_PA values observed for 12 dyes were explained semi‐quantitatively by multiple routes of reactions depending upon to what extent each radical reaction was thermochemically favoured.     

Preparation of La2Zr2O7 by Sol—Gel Route

The La₂Zr₂O₇ phase was prepared from metal acetylacetonates by a sol—gel route without any intermediate phase formation. X-ray peaks appeared at a temperature as low as 500°C at the positions expected for La₂Zr₂O₇, although they were broad. The crystal structure of La₂Zr₂O₇ was found to be of the fluorite type below 900°C and of thepyrochlore type above 1000°C. The substitution of a small amount of Eu for La was carried out to investigate the crystal structure from the viewpoint of fluorescence, and these results confirmed the formation of fluorite type La₂Zr₂O₇ below 900°C.     

Reaction and diffusion of reactive disperse dye in nylon 6

The diffusion of a reactive disperse dye with a vinylsulfonyl group accompanied by simultaneous reaction with the amino end groups in nylon 6 was examined by the method of cylindrical film roll at 70°C and pH 2.2–8.0. The experimental diffusion profiles of the active and fixed species of the dye in nylon 6 were confirmed to be described by the diffusion equation accompanied by the chemical reaction with substrate taking the limited amount of the end groups into account, where the active species of dye were assumed to react only with the free base of amino end groups. The completion of the reaction with the amino end groups was observed in the first layer from the surface at pH 6.0–8.0. The value of diffusion coefficient was constant (8.0 × 10^?10 cm²/s) at all the pH's. The product of the second-order rate constant, k₂, of reaction of the dye and the dissociation constant, K_a, of the amino end groups was constant (k₂K_a = 4.0 × 10^?9 s^?1) at pH 2.2–8.0. The k₂ values of the reaction with various substrates for vinylsulfonyl and monochlorotriazinyl-reactive dyes were compared and the practical dyeing conditions were discussed.     

Diffusion/adsorption model of cellulose dyeing. II. Ordinary cellulose–direct dye system

The diffusion and adsorption of C.I. Direct Yellow 12 and Blue 15 in water-swollen ordinary cellophane sheets were examined at various ionic strengths. The concentration dependence of apparent diffusion coefficients, D_c, for these dyes was obtained from the diffusion profiles in the substrate, which were measured by the use of the cylindrical film roll method. The decrease of apparent porosity with an increase in the amounts of adsorption was observed. To explain the diffusion/adsorption behaviors of these systems, a variable porosity model was proposed and was applied to analyze the concentration dependence of D_c's. The diffusion/adsorption behaviors of these dyes could be quantitatively described by this model at relatively low ionic strengths. At higher ionic strengths and/or lower values of C, i.e., at the large values of C_im/C_m, where the C's are the concentrations of immobilized (suffix im) and mobile (suffix m) species, it needed to introduce the concept of dynamic equilibria which occurred simultaneously with diffusion but deviated from the true equiliblia measured by the adsorption experiments.     

Use of bronchopulmonary lavage for eliminating inhaled fume particles from a patient with arc welder's lung

A 42-year-old man, who had worked as a welder for 20 years, was admitted to our hospital complaining of a dry cough. A chest radiograph showed diffuse small nodular shadows and chest computed tomography revealed small patchy opacities. A transbronchial lung biopsy specimen showed welding fume particles mainly located in alveolar space with mild fibrosis of alveolar septa. In order to prevent further fibrosis, bronchopulmonary lavage (BPL) was performed to eliminate the fume particles. The amount of iron particles derived from the total lavage fluid was 911.7 mg.