New approach for synthesis of activated carbon from bamboo

Unconventional pretreatment, that is, delignification and the addition of guanidine phosphate, was performed for the synthesis of activated carbon having a high specific surface area from bamboo by physical activation. The values of the specific surface area, total pore volume, and average pore size depended on the amount of added guanidine phosphate and the CO₂ activation time. The amount of the added guanidine phosphate under the optimum conditions for the highest specific surface area was much lower than that of the phosphorous acid chemical activator under conventional conditions. The N₂ adsorption isotherms of all the samples were type I, which means that micropores were dominant. The pore sizes of the samples in this study were similar to that of the physically-activated carbon. Therefore, the activation process was presumed to be essentially not chemical, but physical. The relation between the yield and the specific surface area improved with the addition of guanidine phosphate. The reason for the improvement may be the change in the reactivity of the carbon material generated during the heating process. The maximum specific surface area was ca. 2000 m² g^?1, which is a high value for a physically-activated carbon.     

High-dose,intermediate-temperature neutron irradiation effects on silicon carbide composites with varied fiber/matrix interfaces

SiC/SiC composites are promising structural candidate materials for various nuclear applications over the wide temperature range of 300–1000 °C. Accordingly, irradiation tolerance over this wide temperature range needs to be understood to ensure the performance of these composites. In this study, neutron irradiation effects on dimensional stability and mechanical properties to high doses (11–44 dpa) at intermediate irradiation temperatures (?600 °C) were evaluated for Hi-Nicalon Type-S or Tyranno-SA3 fiber–reinforced SiC matrix composites produced by chemical vapor infiltration. The influence of various fiber/matrix interfaces, such as a 50–120 nm thick pyrolytic carbon (PyC) monolayer interphase and 70–130 nm thick PyC with a subsequent PyC (?20 nm)/SiC (?100 nm) multilayer, was evaluated and compared with the previous results for a thin-layer PyC (?20 nm)/SiC (?100 nm) multilayer interphase. Four-point flexural tests were conducted to evaluate post-irradiation strength, and SEM and TEM were used to investigate microstructure. Regardless of the fiber type, monolayer composites showed considerable reduction of flexural properties after irradiation to 11–12 dpa at 450–500 °C; and neither type showed the deterioration identified at the same dose level at higher temperatures (>750 °C) in a previous study. After further irradiation to 44 dpa at 590–640 °C, the degradation was enhanced compared with conventional multilayer composites with a PyC thickness of ?20 nm. Multilayer composites have shown comparatively good strength retention for irradiation to ?40 dpa, with moderate mechanical property degradation beginning at 70–100 dpa. Irradiation-induced debonding at the F/M interface was found to be the major cause of deterioration of various composites.     

Evaluation of Lysophospholipid Measurement in Cerebrospinal Fluid Samples using Liquid Chromatography–Tandem Mass Spectrometry

A quantification system for lysophospholipids (lysoPL) was developed, especially for blood samples, using liquid chromatography–tandem mass spectrometry (LC–MS/MS). However, the lysoPL measurement in cerebrospinal fluid (CSF) has not been validated. Therefore, the present study aimed to validate the lysoPL measurement using CSF samples and to elucidate the possible clinical significance of the lysoPL measurement in CSF. For the validation, we observed a good precision and linearity in a sample with high lysoPL levels. The concentrations of lysoPL changed after incubation but the changes were smaller than those observed for serum samples. Moreover, we observed that the CSF levels of 16:0, 18:0 lysophosphatidylcholine, and 18:0, 18:1, and 20:4 lysophosphatidic acid were significantly higher in subjects with central nervous system invasion caused by hematological malignancies or carcinoma than in subjects with no abnormal CSF test results. In conclusion, an LC–MS/MS quantification system for lysoPL in CSF might be useful and could be applied to clinical laboratory testing.     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Profiling and Imaging of Phospholipids in Brains of Abcd1‐Deficient Mice

ABCD1 is a gene responsible for X‐linked adrenoleukodystrophy (X‐ALD), and is critical for the transport of very long‐chain fatty acids (VLCFA) into peroxisomes and subsequent β‐oxidation. VLCFA‐containing lipids accumulate in X‐ALD patients, although the effect of ABCD1‐deficiency on each lipid species in the central nervous system has not been fully characterized. In this study, each phospholipid and lysophospholipid species in Abcd1‐deficient mice brains were profiled by liquid chromatography‐mass spectrometry. Among the phospholipid and lysophospholipid species that are significantly more enriched in Abcd1‐deficient mice brains, VLCFA were present in 75, 15, 5, 4, and 1 species of phosphatidylcholine, phosphatidylethanolamine, sphingomyelin, lysophosphatidylcholine, and lysophosphatidylethanolamine, respectively. Most VLCFA were incorporated at the sn‐1 position of phosphatidylcholine and phosphatidylethanolamine. Among the phospholipid species that are significantly less enriched in Abcd1‐deficient mice brains, odd‐numbered saturated or mono‐unsaturated fatty acyl moieties are contained in all phosphatidylcholine species. In addition, a number of phosphatidylglycerol, phosphatidylinositol, and phosphatidylserine species contained highly unsaturated fatty acyl moieties. Intriguingly, 44:1 phosphatidylcholine with VLCFA was mainly distributed in the gray matter, such as the cortex, but not in the white matter in the cerebrum and cerebellum. These results show that ABCD1‐deficiency causes metabolic alternation of long‐chain fatty acids and VLCFA. Moreover, our results imply a molecular mechanism for the incorporation of saturated or monounsaturated VLCFA into the sn‐1 position of phospholipids, and also indicate that the distribution of phospholipids with VLCFA may correlate with the development of X‐ALD.     

A smooth impact rotation motor using a multi-layered torsional piezoelectric actuator

A smooth impact rotation motor was fabricated and successfully operated using a torsional piezo actuator. Yoshida et al. reported a linear type smooth impact motor in 1997. This linear motor demonstrated a high output force and a long stroke. A superior feature of the smooth impact drive is a high positioning resolution compared with an impact drive. The positioning resolution of SIDM (smooth impact drive mechanism) is equal to the piezo displacement. The reported positioning resolution of the linear type was 5 nm. Our rotation motor utilized a torsional actuator containing multi-layered piezoelectric material. The torsional actuator was cylindrical in shape with an outer diameter of 15 mm, an inner diameter of 10 mm, and a length of 11 mm. Torsional vibration performance was measured with a laser Doppler vibrometer. The obtained torsional displacement agreed with the calculated values and was sufficient to drive a rotor. The rotor was operated with a saw-shaped input voltage (180 V; 8 kHz). The revolution direction was reversible. The maximum revolution speed was 27 rpm, and the maximum output torque was 56 gfcm. In general, smooth-impact drives do not show high efficiency; however, the level of efficiency of our results (max., 0.045%) could be increased by improving the contact surface material. In addition, we are studying quantitative consideration, for example, about the optimum pre-load or frictional force.     

Selective and in-situ determination of carbonate and oxide particles in aqueous solution using laser-induced breakdown spectroscopy (LIBS) for wearable information equipment

Laser-induced breakdown spectroscopy (LIBS) has been applied for quantitative analysis of Al₂O₃, CaCO₃ and MgO particles suspended in water. In the single elemental system, the plasma emission intensities of Al, Ca and Mg were linearly increased with concentration of elements in the range of 1.0×10^?5–1.0×10^?3  M, 1.0×10^?4–2.0×10^?3 M and 8.0×10^?5 –4.0×10^?3 M, respectively. We also investigated the concentration dependence of breakdown spectra for suspended mixtures of Al₂O₃, CaCO₃ and MgO particles. The emission lines, such as Al I, Ca I, Ca II and Mg I, were appeared in the LIBS spectrum simultaneously, and each emission peak could be deconvoluted. The plasma emission intensities of Al, Ca and Mg in the multielemental system were also linearly increased with their concentrations in the range of 1.0×10^?5–1.0×10^?3 M, 1.0×10^?4–2.0×10^?3 M and 4.0×10^?4–2.0×10^?3 M, respectively. LIBS was found to be available for quantitative and qualitative measurement of the concentrations of Al₂O₃, CaCO₃ and MgO particles suspended in water. The present results suggest that LIBS is a potentially useful tool for in-situ analysis on particles composition and concentrations for environmental monitoring by the wearable information equipments.     

Reversible computing and cellular automata—A survey

Reversible computing is a paradigm where computing models are defined so that they reflect physical reversibility, one of the fundamental microscopic physical property of Nature. In this survey/tutorial paper, we discuss how computation can be carried out in a reversible system, how a universal reversible computer can be constructed by reversible logic elements, and how such logic elements are related to reversible physical phenomena. We shall see that, in reversible systems, computation can often be carried out in a very different manner from conventional (i.e., irreversible) computing systems, and even very simple reversible systems or logic elements have computation- or logical-universality. We discuss these problems based on reversible logic elements/circuits, reversible Turing machines, reversible cellular automata, and some other related models of reversible computing.     

Brain-like Computing Based on Distributed Representations and Neurodynamics

A key to overcoming the limitations of classical artificial intelligence and to deal well with enormous amounts of information might be brain-like computing in which distributed representations of information are processed by dynamical systems without using symbols. We present a method for such computing. We constructed an inference system using a nonmonotone neural network, which is a kind of recurrent neural network with continuous-time dynamics. This system deduces a conclusion according to state transitions of the network in which knowledge is embedded as trajectory attractors. It has the powerful ability of analogical reasoning without special treatment for exceptional knowledge. We also propose a method of linking different neurodynamical systems and show that two mutually interacting systems can process complex spatiotemporal patterns.