Effects of neural refractoriness on spatio-temporal variability in spike initiations with Electrical stimulation.

In this paper, the effects of neural refractoriness on action potential (spike) initiations with electrical stimulation are investigated using computer modeling and simulation techniques. The computational model was composed of a myelinated nerve fiber with 50 nodes of Ranvier, each consisting of stochastic sodium and potassium channels, making it possible to represent the fluctuations of spike initiation. A series of two-pulse stimuli was presented by a stimulating electrode above the central (26th) node of Ranvier. The amplitude of the first (masker) pulse stimulus was set such that the masker pulse stimulus evoked spikes on each trial, while that of the second (probe) pulse stimulus was set such that the probe pulse stimulus evoked spikes on a half of trials, threshold values. Then the transmembrane potentials in response to the probe pulse stimulus were recorded at each node (i.e., 1-50 nodes) in order to determine the spike initiation node and time. From the observation of the spike initiation node and time, a spatio-temporal histogram as well as a spatial variability and a temporal variability of spike initiations was generated which allowed us to interpret fluctuations in spike initiation node and time. It was shown that the distribution of spike initiations tended to become greater spatially and longer temporally as the masker-probe intervals (MPIs) of the two-pulse stimuli shortened. It was also shown that the number of activated sodium channels as functions of space and time tended to become smaller due to inactivation of sodium channels and varied spatially and temporally as MPIs shortened. These findings may imply that the stochastic sodium channels during a relative refractory period may contribute to enhancing the fluctuations in spike initiations, and give us an insight into encoding information with electric stimuli to improve the performance of the prosthetic devices, especially cochlear implants.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.     

Structural approach to nanoscience: a case study of complex and cluster formation in ZnBr2–ZnCl2 melts

Although the melt structure of glass-forming ZnCl₂ has so far been well studied, there exists quite little information on the structural change due to anion-substitution. In the present work, the short-range structure of ZnCl₂–ZnBr₂ mixture melts was analyzed systematically by time-of-flight pulsed neutron diffraction techniques, Raman spectroscopy, molecular orbital calculations, and molecular dynamics simulations. According to radial distribution analysis, it was found that there were tetrahedral structural units of ligand-substituted [ZnCl_nBr_4−n]²⁻ (n=0–4) in these melts, not implying the simple mixing of [ZnCl₄]²⁻ and [ZnBr₄]²⁻ units. Further detailed estimation indicated that the ligand-substituted complex anions were linked with each other by sharing a common anion.     

Comparative hypocholesterolemic effects of six dietary oils in cholesterol-fed rats after long-term feeding

Rats (8 wk of age) fed a conventional diet were shifted to diets containing 10% Oenothera biennis Linn oil (OBLO, linoleic acid + gamma-linolenic acid) from a wild plant, evening primrose oil (EPO, linoleic acid + gamma-linolenic acid) from a cultivated plant, bio-gamma-linolenic acid oil from mold (BIO, palmitic acid + oleic acid + linoleic acid + gamma-linolenic acid), safflower oil (linoleic acid), palm oil (PLO, palmitic acid + oleic acid + linoleic acid), or soybean oil (linoleic acid + alpha-linolenic acid) with 0.5% cholesterol for 13 wk. Though there were no significant differences in the food intake among the groups, the body weight gain of the OBLO group was significantly lower than that of the other groups except for the BIO and PLO groups, and that of the EPO and SBO groups were the highest among the groups. The liver weight of the OBLO group was significantly lower than that of other groups, and that of the PLO group was the highest among the groups. The serum total cholesterol and very low density lipoprotein (VLDL) + intermediate density lipoprotein (IDL) + low density lipoprotein (LDL) cholesterol concentrations of the OBLO and EPO groups were consistently lower than those in the other groups. However, those of the BIO group were higher than those in the OBLO and EPO groups. The liver cholesterol concentration of the PLO group was the highest among all groups except for the EPO group. The fecal neutral sterol and bile acid extraction of the BIO group tended to increase compared to the other groups. The results of this study demonstrate that OBLO and EPO inhibit the increasing of serum total cholesterol and VLDL + IDL + LDL-cholesterol concentrations in the presence of excess cholesterol in the diet compared with the other dietary oils.     

A versatile planar QCM-based sensor design for nonlabeling biomolecule detection

Despite high theoretical sensitivity, low-cost manufacture, and compactness potentially amenable to lab-on-a-chip use, practical hurdles have stymied the application of the quartz crystal microbalance (QCM) for aqueous applications such as detection of biomolecular interactions. The chief difficulty lies in achieving a sufficiently stable resonance signal in the presence of even minute fluctuations in hydrostatic pressure. In this work, we present a novel versatile planar sensor chip design (QCM chip) for a microliter-scale on-line biosensor. By sealing the quartz resonator along its edges to a flat, solid support, we provide uniform support for the crystal face not exposed to solvent, greatly decreasing deformation of the crystal resonator under hydrostatic pressure. Furthermore, this cassette design obviates the need for direct handling when exchanging the delicate quartz crystal in the flow cell. A prototype 27-MHz sensor signal exhibited very low noise over a range of flow rates up to 100 microL/min. In contrast, signals obtained from a conventional QCM sensor employing an O-ring-based holder were less stable and deteriorated even further with increasing flow rate. Additional control designs with intermediate amounts of unsupported undersurface yielded intermediate levels of stability, consistent with the interpretation that deformation of the crystal resonator under fluctuating hydraulic pressure is the chief source of noise. As a practical demonstration of the design's high effective sensitivity, we readily detected interaction between myoglobin and surface-bound antibody.     

Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

In this study, the correlation between the stress–strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([?45/45]_2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress–strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.     

浸没式光刻的优势和可行性

浸没式光刻通过高折射率的液体充入透镜底部和片子之间的空间使光学系统的数值孔径具有显著的优势。在193nm曝光系统中,水(折射率为1.44)被选作最佳的浸入液体。通过成像模拟,现已证明ArF穴193nm雪浸没式光刻(NA=1.05～1.23)与F2穴157nm雪干法穴NA=0.85～0.93雪光刻具有几乎相同的成像性能。结合流体力学和热模拟结果,讨论了ArF浸没式曝光设备的优势和可行性。     

Elevated Alpha 1(I) to Alpha 2(I) Collagen Ratio in Dermal Fibroblasts Possibly Contributes to Fibrosis in Systemic Sclerosis

Systemic sclerosis (SSc) is characterized by excessive collagen deposition in the skin and internal organs. Activated fibroblasts are the key effector cells for the overproduction of type I collagen, which comprises the α1(I) and α2(I) chains encoded by COL1A1 and COL1A2, respectively. In this study, we examined the expression patterns of α1(I) and α2(I) collagen in SSc fibroblasts, as well as their co-regulation with each other. The relative expression ratio of COL1A1 to COL1A2 in SSc fibroblasts was significantly higher than that in control fibroblasts. The same result was observed for type I collagen protein levels, indicating that α2(I) collagen is more elevated than α2(I) collagen. Inhibition or overexpression of α1(I) collagen in control fibroblasts affected the α2(I) collagen levels, suggesting that α1(I) collagen might act as an upstream regulator of α2(I) collagen. The local injection of COL1A1 small interfering RNA in a bleomycin-induced SSc mouse model was found to attenuate skin fibrosis. Overall, our data indicate that α2(I) collagen is a potent regulator of type I collagen in SSc; further investigations of the overall regulatory mechanisms of type I collagen may help understand the aberrant collagen metabolism in SSc.