JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Synthesis of the Bi-2222 Compounds of Bi–Sr–Ln(Zr)–Cu–O (Ln = Sm,Eu, Gd,and Dy)

Bi-based superconducting compounds with the 2222 structure has been already synthesized in the Bi₂Sr₂- (Ln_1−x Ce _x )₂Cu₂O_10+y (Ln = Sm, Eu, and Gd) systems. One of the characteristics of these compounds is the existence of the fluorite-like (Ln_1−x Ce _x )₂O₂ block between two CuO₅ pyramids in the crystal structure. The tetravalent ions of Ce⁴⁺ are reported to be necessary to stabilize the 2222 structure. Recently, we have discovered that the Bi-2222 phase could be composed in the Bi₂Sr₂(Ln_2−x Zr _x )Cu₂O _z (Ln = Sm, Eu, Gd, and Dy) systems, where Zr⁴⁺ is used as a new tetravalent ion stabilizing the 2222 structure in stead of Ce⁴⁺. In the new system, nearly single 2222 phase samples have been obtained at the nominal composition of x=0.5 (Ln = Sm, Eu, and Gd) and in the range of 0.1≤x≤0.3 (Ln = Dy). Among them, the sample with Ln = Gd has the smallest resistivity at 273 K. But it is a semiconductor, and the conduction process at low temperatures is assumed to be followed by a two-dimensional VRH. The experimental results for the Gd samples with a partial substitution of Pb for Bi in the Bi₂Sr₂(Gd_2−x Zr _x )Cu₂O _z system are also reported.     

Stress field near interface edge of elastic-creep bi-material

Stress fields on elastic-creep bi-material interfaces with different geometry of the interface edge are analyzed by finite element method. The results reveal that the stress highly concentrates near the interface edge at the loading instant and it gradually decreases as the creep-dominated zone expands from the small-scale creep to the large-scale creep. The stress singularity due to creep which resembles the HRR stress singularity appears near the interface edge in all cases. The stress intensity near the interface edge time-dependently decreases and becomes constant when the transition reaches the steady state. The magnitude is scarcely influenced by the edge shape of elastic material, though it depends on the edge shape of creep material. The stress intensity during the transition can be approximately predicted by the J-integral at the loading instant.     

Design of single-sided linear induction motors for urban transit

A method of designing low-speed single-sided linear induction motors (SLIMs) for urban transit with maximum speed of 70 km/h is described. The SLIMs can be used not only for Maglev vehicles, but also for the vehicles of the LIM/wheel systems in which the SLIMs are used for propulsion and the wheels for suspension and guidance. The effects of varying principal design parameters on the performance characteristics and the motor weight are numerically investigated. The effects of small changes of the LIM specifications are also shown. The motor weight, the cost of secondary materials, and the energy consumption for a typical route (including regenerative braking operation) are considered as the criteria of goodness for SLIMs. A design example is tackled using the sequential unconstrained minimization technique and the simplex method     

Isolation and structural analysis of efficient autonomously replicating sequences (ARSs) of the yeast Candida utilis

The industrially important yeast Candida utilis is widely used in production of food and medical materials, but its host-vector system has not been well developed. We screened for compact and efficient ARSs to construct practically useful vectors. The C. utilis strain AHU3053 was found to be efficiently transformed by the conventional lithium acetate method and was used as the host. The C. utilis IAM4264 genomic library was constructed by inserting the partial Sau3AI digests in pRI51, which has a kanMX gene expressible in C. utilis. By examining 98 C. utilis G418-resistant transformants, five plasmids had the highest ARS activity. By trimming of the inserts, the 1490 and 552 bp fragments with transformation activity of over 10(3)/microg DNA were obtained from ARS3 and ARS4, respectively. Although several sequences identical to S. cerevisiae ARS consensus sequences (ACSs) were found in ARS3 and ARS4, our deletion analysis indicated that these were not essential for the activity. Because the minimal functional ARS fragment was also several-fold larger than that of S. cerevisiae, the C. utilis ARSs have some unique characteristics resembling the Sz. pombe ARSs. These ARSs were functional in other C. utilis strains tested and useful for constructing practical vectors.     

The Sliding Friction of Hybrid Composite Journal Bearing Under Various Test Conditions

The friction and wear behaviour of SiC, Si₃N₄ and SiC/Si₃N₄ composite ceramics were investigated with oscillating sliding (gross slip fretting) at room temperature. The influence of counter body material and the humidity of the surrounding air was studied with a ball-on-disc configuration with different ball materials (1000Cr6, Al₂O₃ SiC and Si₃N₄). The effect of RH on friction is marginal with exception of SiC (low friction) as counter body material. The wear behaviour, however, is strongly affected by humidity, showing inverse trends for different counter body materials. Consequently, the wear behaviour of a tribo couple can be improved by selecting an adequate mating material. The results reveal the necessity to control RH in tribological tests. For estimation of the performance of tribo couples under varying environmental conditions, a variation of RH is required. In tribo couples with single phase SiC, either as ball or disc, the tribological behaviour of the system is dominated by SiC. The friction behaviour of the composite material is in between the behaviour of the two single phase materials, Si₃N₄ and SiC, whereas the wear behaviour is very similar to that of single phase Si₃N₄.     

Cloning of a novel signal-transducing adaptor molecule containing an SH3 domain and ITAM

We molecularly cloned a cDNA coding for a novel phosphotyrosine molecule with a 70 kDa molecular mass, named STAM (signal transducing adaptor molecule), which is tyrosine-phosphorylated rapidly after stimulation with various cytokines such as IL-2, IL-3, IL-4, IL-7, GM-CSF, EGF and PDGF. STAM contains an SH3 (Src-homology 3) domain and the ITAM (immunoreceptor tyrosine-based activation motif), suggesting that STAM acts as an adaptor molecule involved in signal transducing pathways from the cytokine receptors.     

Polymorphisms of dopamine receptor and transporter genes and Parkinson's disease

Disturbances of the dopamine system are involved in the pathogenesis of idiopathic Parkinson's disease (PD). Although genetic factors may play a role in the etiology of PD, there is little direct evidence implicating a specific gene. We conducted a study to test the hypothesis that allelic variations of the dopamine receptors (D2, D3, D4) and the dopamine transporter (DAT) contribute to the susceptibility to PD. Association analyses of 70 Japanese PD patients and the same number of age-matched controls did not reveal any association between alleles of the D2, D3 or D4 receptor genes or the DAT gene and PD. Thus, our results suggest that factor(s) other than allelic variations of these key proteins in the dopamine system contribute to the susceptibility to PD.     

Measurement of axial neutral density profiles in a microwave discharge ion thruster by laser absorption spectroscopy with optical fiber probes

In order to reveal the physical processes taking place within the "μ10" microwave discharge ion thruster, internal plasma diagnosis is indispensable. However, the ability of metallic probes to access microwave plasmas biased at a high voltage is limited from the standpoints of the disturbance created in the electric field and electrical isolation. In this study, the axial density profiles of excited neutral xenon were successfully measured under ion beam acceleration by using a novel laser absorption spectroscopy system. The target of the measurement was metastable Xe I 5p(5)((2)P(0) (3/2))6s[3/2](0) (2) which absorbed a wavelength of 823.16 nm. Signals from laser absorption spectroscopy that swept a single-mode optical fiber probe along the line of sight were differentiated and converted into axial number densities of the metastable neutral particles in the plasma source. These measurements revealed a 10(18) m(-3) order of metastable neutral particles situated in the waveguide, which caused two different modes during the operation of the μ10 thruster. This paper reports a novel spectroscopic measurement system with axial resolution for microwave plasma sources utilizing optical fiber probes.