Design of electrofusion joints and evaluation of fusion strength using fusion simulation technology

Fusion simulation is one of the key techniques in designing and producing electrofusion (EF) joints for gas distribution and in evaluating fusion joint integrity. This paper describes the result of a numerical simulation of a thermal fusion process, using the finite element method. A nonlinear heat transfer computer program was used to obtain the temperature profile of a large electrofusion joint at fusion. The effects of applied voltage, heating time, wire pitch, and ambient temperature were examined for designing a 150-mm EF joint. A method to shorten the cooling time was also investigated. The fusion condition range suitable for a 150-mm EF joint was found to be slightly narrower than that suitable for a 50-mm EF joint. Examination of the effect of wire pitch revealed that if the pitch is extremely large, thermal degradation starts in the resin close to the wire before the fusion-interface strength reaches the maximum value. We have developed a program to simulate the process of closing the gap between the pipe and the joint due to resin expansion and melting after the power is supplied.     

Analysis of higher information density pregroove model by boundary element method

Using the boundary element method, results of the push-pull ratio of differential output signals from an optical disc pregroove model by simulation are presented. The possibility of achieving higher information density by reducing the track pitch and the beam spot is demonstrated.<>     

Performance analysis of disk allocation method usingerror-correcting codes

The problem of distributing a Cartesian product file on multiple disks to maximize the parallelism for partial match queries is addressed. C. Faloutsos et al. (1989) have proposed an allocation method for Cartesian product files on multiple disks by using linear error-correcting codes. The performance of the allocation method is analyzed. Some conditions under which the allocation method is strictly optimal for queries with a given number of unspecified attributes are presented. A necessary and sufficient condition for a linear code to give a strictly optimal allocation method is discussed. Formulas for the average response time on queries with w unspecified attributes, denoted T_w, in terms of the weight distribution of the code or its dual code, and formulas for the average response time Ton all queries, are given. Several examples whose average response times T_w or T are close to theoretical lower bounds are presented     

Application-aware buffer management: new metrics and techniques

An important issue for video transmission over IP networks is preservation of perceived video quality despite packet loss. Packet loss can be detrimental to compressed video. However, reducing packet loss to a very low level is difficult with current loss control techniques. Furthermore, even a very low objective loss probability can still seriously distort perceived video quality. This paper presents two buffer management schemes using video characteristics. They increase maximum loss tolerance for a desired level of video quality, providing better quality at equal loss ratios, when compared to a conventional buffer management scheme. Meanwhile, service fairness and network efficiency are also improved.     

Free volume and permeabilities of O2 and H2 in Nafion membranes for polymer electrolyte fuel cells

The mechanism of gas permeation in Nafion membranes for polymer electrolyte fuel cells has been investigated from the viewpoint of free volume. Three different samples, a membrane with ionic exchange capacity (IEC) = 0.92 meq/g, and recast samples with IEC = 0.92 and 1.00 meq/g were used after drying. Free volume was quantified using the positron annihilation lifetime (PAL) technique and gas permeabilities were measured for O₂ and H₂ as functions of temperature and relative humidity. Good linear correlations between the logarithm of the permeabilities at different temperatures and reciprocal free volume indicate that gas permeation in dry Nafion is governed by the free volume. Nevertheless permeabilities are much smaller than the corresponding flexible chain polymer with a similar free volume size due to stiff chains of the perfluoroethylene backbone. In highly hydrated Nafion above 60% relative humidity, where the O₂ permeability varies oppositely to the free volume, gas permeation proved to be controlled by the gradual increase in overall flexibility of the Nafion–water system.     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

Ideal crosslinked-polymers and their characterization in free-radical monovinyl-divinyl copolymerizations

The critical conditions in which the classical Flory-Stockmayer gelation theory (F-S theory) is applicable to monovinyl-divinyl copolymerizations were pursued in detail. The resulting prepolymers or precursors of ideal crosslinked-polymers were characterized as standard polymers for the discussion of network formation in free-radical monovinyl-divinyl copolymerizations. Methyl methacrylate was copolymerized with a small amount of ethylene dimethacrylate, butylene dimethacrylate or nonapropyleneglycol dimethacrylate in the presence of lauryl mercaptan, a chain transfer agent to reduce the occurrence of a thermodynamic excluded volume effect and intramolecular crosslinking as the primary and secondary factors, respectively, for the greatly delayed gelation in the free-radical monovinyl-divinyl copolymerizations and, moreover, to keep the primary chain length constant by inhibiting a gel effect. The ratio of the actual gel point to the theoretical one reached 1.1, supporting the validity of F-S theory. The resulting prepolymers were subjected to SEC-MALLS analysis to determine the molecular weights, the molecular-weight distributions and the radii of gyration; the correlations of molecular weight vs. elution volume and radius of gyration vs. molecular weight were useful for the characterization of the precursors of ideal network-polymers.     

Use of external conduit impairs liver function in patients with biliary atresia

An external conduit (stoma) for patients with biliary atresia has been used to prevent postoperative cholangitis. Thirty-two patients with biliary atresia who had hepatic portoenterostomies with external conduits were studied retrospectively with respect to frequency and severity of postoperative cholangitis or stoma bleeding. Changes in their liver enzyme levels, and total bilirubin (TB) levels were measured before and after closure of the stoma. Cholangitis was observed in 20 patients (62.5%), and major hemorrhage from the stoma site was seen in 14 patients (43.8%) prior to closure. Levels of liver enzymes such as glutamic oxaloacetic transaminase (SGOT), glutamic pyruvic transaminase (SGPT), gamma-glutamyl transpeptidase (gamma-GTP), and alkaline phosphatase (ALP) improved significantly within 1 month after closure of the stoma, and remained low thereafter. The TB concentration was the only liver function that did not change significantly following closure. In summary, the authors do not recommend an external conduit in patients with biliary atresia because it is not an effective way of reducing the incidence of postoperative cholangitis, and it may be deleterious to liver function.     

Patients with ultrasonic coarse-nodular cirrhosis who are anti-hepatitis C virus-positive are at high risk for hepatocellular carcinoma

BACKGROUND: The relationship between echosonographic patterns of patients with cirrhosis who are antihepatitis C virus (HCV)-positive, the DNA synthesis of hepatocytes, and the risk for HCC were studied. METHODS: Thirty-eight patients with anti-C-100 antibody-positive and Child's grade A posthepatitic cirrhosis were studied. DNA synthesis activity was measured by a bromodeoxyuridine (BrdU, a thymidine analogue)-labeling index (LI), using the BrdU-anti-BrdU in vitro method, and the patients were followed prospectively by frequent liver ultrasonography for 3 years. The ultrasound patterns were classified into fine, coarse, and coarse-nodular (CN) patterns, and the reproducibility of the classification in practical use also was confirmed. RESULTS: Of the 21 patients with high DNA synthesizing cirrhosis (BrdU LI > or = 1.5%), 10 (48%) showed coarse-nodular, 5 (24%) coarse, and 6 (29%) fine pattern in ultrasonography. Conversely, of the 17 patients with low DNA synthesizing LC (BrdU LI < 1.5%), only 1 (6%) showed coarse-nodular, 2 (12%) coarse, and 14 (82%) fine pattern. A significant relationship was found between the two groups of BrdU LI and ultrasound imaging patterns (P < 0.05). The incidence of CN pattern was significantly higher (P < 0.01) in the high DNA synthesizing group than in low DNA synthesizing group. Of the 11 patients with CN pattern by ultrasound imaging, 10 (91%) were in the high DNA synthesizing group, and 9 (82%) developed HCC during the follow-up period, compared with 3 of 7 (43%) with coarse, and only one of 20 (5%) with fine pattern developed HCC. The incidence of HCC was significantly higher (P < 0.01) in patients with a CN cirrhosis pattern than in those with a fine pattern. CONCLUSIONS: In patients with cirrhosis who are anti-HCV-positive, the CN pattern by ultrasound imaging indicates increased DNA synthesis of hepatocytes and a high risk for developing HCC.     

A 10 bit 20 MS/s 3 V supply CMOS A/D converter

A 10 bit CMOS A/D converter with 3 V power supply has been developed for being integrated into system VLSI's. In this A/D converter, redundant binary encoders named “twin encoders” enhance tolerance to substrate noise, together with employing differential amplifiers in comparators. The bias circuit using a replica of the amplifier is developed for biasing differential comparators with 3 V power supply. Subranging architecture along with a multilevel tree decoding structure improves dynamic performance of the ADC at 3 V power supply. The A/D converter is fabricated in double-polysilicon, double-metal, 0.8 μm CMOS technology. The experimental results show that the ADC operates at 20 MS/s and the twin encoders suppress the influence of substrate noise effectively. This ADC has a single power supply of 3 V, and dissipates 135 mW at 20 MS/s operation