Climate Change Impact Assessment on Blue and Green Water by Coupling of Representative CMIP5 Climate Models with Physical Based Hydrological Model

Water Resources Management - Climatic changes have altered hydrological and climatic parameters worldwide, and climate projections suggest that such alterations will continue. In order to maintain...     

Multiresidue method for pesticides and veterinary drugs in bovine milk using GC/MS and LC/MS/MS

A simple, sensitive and selective method with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been developed to detect 342 pesticides and veterinary drugs contaminating bovine milk at the maximum residue limits (MRLs) defined in the "positive list system". Sample preparation was performed by extracting the analytes with acetonitrile, followed by salting-out with sodium chloride. For some pesticides, the extract was further cleaned up by n-hexane partitioning and PSA cartridge column chromatography. GC/MS-EI or -NCI was used to determine pesticide residues, while LC/MS/MS-ESI was applicable to the determination of pesticide and veterinary drug residues. The variation of the recoveries of these drugs at MRL was relatively wide; however the relative standard deviations of the recovery of each drug were within 28%, suggesting that the present method is good enough for use as a screening test for contaminants at the MRLs. These results show that this method is useful for multiresidue analysis of numerous pesticides and veterinary drugs in bovine milk.     

Synthesis of the Bi-2222 Compounds of Bi–Sr–Ln(Zr)–Cu–O (Ln = Sm,Eu, Gd,and Dy)

Bi-based superconducting compounds with the 2222 structure has been already synthesized in the Bi₂Sr₂- (Ln_1−x Ce _x )₂Cu₂O_10+y (Ln = Sm, Eu, and Gd) systems. One of the characteristics of these compounds is the existence of the fluorite-like (Ln_1−x Ce _x )₂O₂ block between two CuO₅ pyramids in the crystal structure. The tetravalent ions of Ce⁴⁺ are reported to be necessary to stabilize the 2222 structure. Recently, we have discovered that the Bi-2222 phase could be composed in the Bi₂Sr₂(Ln_2−x Zr _x )Cu₂O _z (Ln = Sm, Eu, Gd, and Dy) systems, where Zr⁴⁺ is used as a new tetravalent ion stabilizing the 2222 structure in stead of Ce⁴⁺. In the new system, nearly single 2222 phase samples have been obtained at the nominal composition of x=0.5 (Ln = Sm, Eu, and Gd) and in the range of 0.1≤x≤0.3 (Ln = Dy). Among them, the sample with Ln = Gd has the smallest resistivity at 273 K. But it is a semiconductor, and the conduction process at low temperatures is assumed to be followed by a two-dimensional VRH. The experimental results for the Gd samples with a partial substitution of Pb for Bi in the Bi₂Sr₂(Gd_2−x Zr _x )Cu₂O _z system are also reported.     

Stress field near interface edge of elastic-creep bi-material

Stress fields on elastic-creep bi-material interfaces with different geometry of the interface edge are analyzed by finite element method. The results reveal that the stress highly concentrates near the interface edge at the loading instant and it gradually decreases as the creep-dominated zone expands from the small-scale creep to the large-scale creep. The stress singularity due to creep which resembles the HRR stress singularity appears near the interface edge in all cases. The stress intensity near the interface edge time-dependently decreases and becomes constant when the transition reaches the steady state. The magnitude is scarcely influenced by the edge shape of elastic material, though it depends on the edge shape of creep material. The stress intensity during the transition can be approximately predicted by the J-integral at the loading instant.     

Thermally reversible xyloglucan gels as vehicles for rectal drug delivery

The aim of this study was to investigate the potential application of thermoreversible gels formed by a xyloglucan polysaccharide derived from tamarind seed for rectal drug delivery. Xyloglucan that had been partially degraded by beta-galactosidase to eliminate 44% of galactose residues formed gels at concentrations of between 1 to 2% w/w at gelation temperatures decreasing over the range 27 to 22 degreesC with increasing concentration. The in vitro release of indomethacin and diltiazem from the enzyme-degraded xyloglucan gels followed root-time kinetics over a period of 5 h at 37 degreesC; the diffusion coefficients increasing with temperature increase between 10 and 37 degreesC. The in vitro release of indomethacin from the gels was significantly more sustained than from commercial suppositories. Measurement of plasma levels of indomethacin after rectal administration to rabbits of the gels and commercial suppositories containing an identical drug concentration indicated a broader absorption peak following administration of the gels, and a longer residence time. There was no significant difference in bioavailability of indomethacin when administered by these two vehicles. Morphological studies of rectal mucosa following a single administration of the gels showed no evidence of tissue damage. The results of this study suggest the potential of the enzyme-degraded xyloglucan gels as vehicles for rectal delivery of drugs.     

Reaction mechanism of fluoroacetate dehalogenase from Moraxella sp. B

Fluoroacetate dehalogenase (EC 3.8.1.3) catalyzes the dehalogenation of fluoroacetate and other haloacetates. The amino acid sequence of fluoroacetate dehalogenase from Moraxella sp. B is similar to that of haloalkane dehalogenase (EC 3.8.1.5) from Xanthobacter autotrophicus GJ10 in the regions around Asp-105 and His-272, which correspond to the active site nucleophile Asp-124 and the base catalyst His-289 of the haloalkane dehalogenase, respectively (Krooshof, G. H., Kwant, E. M., Damborsky, J., Koca, J., and Janssen, D. B. (1997) Biochemistry 36, 9571-9580). After multiple turnovers of the fluoroacetate dehalogenase reaction in H218O, the enzyme was digested with trypsin, and the molecular masses of the peptide fragments formed were measured by ion-spray mass spectrometry. Two 18O atoms were shown to be incorporated into the octapeptide, Phe-99-Arg-106. Tandem mass spectrometric analysis of this peptide revealed that Asp-105 was labeled with two 18O atoms. These results indicate that Asp-105 acts as a nucleophile to attack the alpha-carbon of the substrate, leading to the formation of an ester intermediate, which is subsequently hydrolyzed by the nucleophilic attack of a water molecule on the carbonyl carbon atom. A His-272 --> Asn mutant (H272N) showed no activity with either fluoroacetate or chloroacetate. However, ion-spray mass spectrometry revealed that the H272N mutant enzyme was covalently alkylated with the substrate. The reaction of the H272N mutant enzyme with [14C]chloroacetate also showed the incorporation of radioactivity into the enzyme. These results suggest that His-272 probably acts as a base catalyst for the hydrolysis of the covalent ester intermediate.     

Relationship between local structure and stability in hen egg white lysozyme mutant with alanine substituted for glycine

We prepared five mutant lysozymes in which glycines whose dihedralangles are located in the region of the left-handed helix, Gly49,Gly67, Gly71, Gly102 and Gly117, were mutated to an alanineresidue. From analyses of their thermal stabilities using differentialscanning calorimetry, most of them were more destabilized thanthe native lysozyme, except for the G102A mutant, which hasa stability similar to that of the native lysozyme at pH 2.7.As for the destabilized mutant lysozymes, their X-ray crystallographicanalyses showed that their global structures did not changebut that the local structures changed slightly. By examiningthe dihedral angles at the mutation sites based on X-ray crystallographicresults, it was found that the dihedral angles at these mutationsites tended to adopt favorable values in a Ramachandran plotand that the extent and direction of their shifts from the originalvalue had similar tendencies. Therefore, the change in dihedralangles may be the cause of the slight local structural changesaround the mutation site. On the other hand, regarding the mutationof G102A, the global structure was almost identical with thatof the native structure but the local structure was drasticallychanged. Therefore, it was suggested that the drastic localconformational change might be effective in releasing the unfavorableinteraction of the native state at the mutation site.     

Change of orientation by thermal contraction of polyacrylonitrile fiber

Polyacrylonitrile polymer powder was dissolved in 70% nitric acid and spun into isotropic filament through a glass nozzle of 0.5 mm. diameter in a coagulating bath of 30% nitric acid. Stretching was carried out in two stages: the first stretching was done in water at 20°C. followed by drying, and the second stretching was done in a boiling saturated solution of ammonium sulfate. The total stretching ratio was 23. These filaments were shrunk freely in water at 70–180°C. The change in orientation factors was traced by x-ray, infrared dichroism, visible dichroism, and sonic modulus methods. The relation between the reciprocal absolute temperature of thermal contraction and the logarithm of fiber length is a straight line which has two inflection points at 93 and 175°C. The orientation factors by x-ray and infrared dichroism remain unchanged up to 175°C. On the contrary, the orientation factors by visible dichroism and sonic modulus drop suddenly at about 90°C. This indicates the occurrence of relaxation of the amorphous chain at the glass transition temperature and shows the polymer is not perfect single-phase material. Orientation of crystalline and amorphous phases is stable from 100 to 170°C. in spite of considerable thermal contraction. The stability of orientation can be explained by the growth of a folded structure in the polymer.     

Poly(4-diphenylaminostyrene) with a well-defined polymer chain structure: Controllable optical and electrical properties

The effect of polymer chain structure on the optical and electrical properties are reported for poly(4-diphenylaminostyrene) (PDAS), which was prepared by the living anionic polymerization of 4-diphenylaminostyrene (DAS) with the benzyllithium (BzLi)/N,N,N′,N′-tetramethylethylenediamine (TMEDA) system. The optical properties of PDAS are strongly affected by the stereoregularity of the PDAS polymer chain; intramolecular excimer-forming fluorescence was observed from PDAS with a syndiotactic-rich configuration. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PDAS were approximately −5.4 and −2.0 eV, respectively, regardless of the polymer chain structure. The hole and electron drift mobilities for PDAS were in the order of 10⁻⁴ to 10⁻⁵ (cm²/V s) and 10⁻⁵ (cm²/V s), respectively, with negative slopes. The distance of each triphenylamino (TPA) group in the polymer chain was a major factor influencing the drift mobility of PDAS. The current-voltage (I-V) characteristics of PDAS were controllable according to the polymer chain structure of PDAS.     

Reaction of Syringylglycerol-β-Syringyl Ether Type of Lignin Model Compounds in Alkaline Medium

Reactions of three kind of syringylglycerol- β-syringyl ether type model compounds under alkaline medium were investigated. Sinapyl alcohol and β-hydroxypropiosyringone were formed as phenyl propanoid moieties from syringylglycerol- β-(methyl-syringyl) ether 1 by the β-aryl ether cleavage under soda treatment, while only sinapyl alcohol was formed from syringylglycerol- β-syringyl ether 2. The formation of both two degradation products are quite interesting because there is no nucleophilic additives in soda liquor. A possible reaction mechanisms for the β-aryl cleavage of syringylglycerol-β-syringyl ether type is homolytical cleavage via quinone methide.