采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002     

Properties of graphite prepared from boron-doped pitch as an anode for a rechargeable Li ion battery

Boron-doped graphites were derived from a naphthalene-based pitch mixed with para-xylene glycol (PXG) or dimethyl para-xylene glycol (DMPXG) as a cross-linking agent and three types of boron-containing compounds as a graphitization catalyst, and their anode performances were investigated. The structural analysis of the obtained graphites revealed that PXG functioned mainly as a two-dimensional cross-linking agent during the heat treatment process and DMPXG functioned partially as a three-dimensional. The average interlayer spacing decreased and lattice constant, a₀, and graphitizability increased with increasing the amount of boron atoms added. The result indicated that the carbon atoms were replaced by boron atoms. The anode performance was improved by the enhancement of graphitizability. The structural parameters and anode performance of boron-doped graphites did not depend on the kind of boron-containing compounds but the amount of boron atoms added in pitch and the kind of cross-linking agent.     

Denitrification in shallow groundwater in a coastal agricultural area in Japan

In a coastal agricultural area in the central part of Japan (Shizuoka), we found decreasing nitrate concentration with depth in a shallow groundwater, where the depth to water table varied between 0.6 and 1.2 m below ground surface. High nitrate concentrations (5–29 mg N L^–1) were often observed in the upper layer (0–2 m) of the groundwater, but the concentration decreased to less than 1 mg N L^–1 in the deeper layer. Ammonium was scarcely detected, and the concentration of dissolved oxygen was usually low (< 1 mgO₂ L^–1) in the groundwater. Nitrate in the groundwater often had very heavy nitrogen stable isotope ratios (>20{}). There was a negative relationship between nitrogen stable isotope ratio of nitrate and its concentration. When nitrate was injected into the groundwater with acetylene and bromide (a conservative tracer), nitrate concentration decreased to 20% of the initial level within 5 days, accompanied by the increase in nitrite and nitrous oxide concentration and a little change in bromide concentration. These results indicate that microbial denitrification plays a potential role in the decrease of nitrate in shallow groundwater at the study site.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Gibbs Energy Change of Carbothermal Nitridation Reaction of Al2O3 to Form AlN and Reassessment of Thermochemical Properties of AlN

The experimental method for the high-temperature reaction equilibria in the AlN-Al₂O₃ system has been established. The equilibrium N₂-CO gas compositions coexisting with AlN- Al₂O₃-graphite have been successfully measured by quadrupole mass spectrometry and gas chromatography. From the obtained results, the standard Gibbs energy change of the forming reaction of AlN by carbothermal nitridation is determined at temperatures ranging from 1723 to 1899 K:
From the obtained result, the standard Gibbs energy of formation of AlN and the third-law enthalpy of formation of AlN at 298.15 K are derived as
The disagreement between the present results and values in the NIST–JANAF thermodynamic table is discussed.     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. III. Adhesive Joint Strengths of Grafted Power Feed Copolymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. Power feed copolymer had a very broad glass transition temperature compared with random copolymer, even if grafting and/or crosslinking were introduced to the system. This tendency was almost the same as the non-grafted power feed copolymer where only low molecular weight surfactant was used.

Adhesive joint strengths of power feed copolymers were evaluated compared with random copolymers. In the case of usual linear power feed copolymer, the adhesive joint strengths were not higher than those of random copolymer, which was considered to be due to the lower film strengths of the power feed copolymer. Power feed copolymer having grafting showed slightly higher adhesive joint strengths over a wide range of temperatures than random copolymer. When crosslinking was introduced to the system, power feed copolymer showed much higher adhesive joint strengths over a wide temperature range.     

Production of 5,8,11-cis-eicosatrienoic acid by a Δ12-desaturase-defective mutant ofMortierella alpina 1S-4

A mutant defective in Δ12-desaturase of an arachidonic-acid producing fungus,Mortierella alpina 1S-4, was shown to be a novel potent producer of Mead acid (5,8,11-cis-eicosatrienoic acid, 20:3ω9). The fungus produced several fatty acids of the n-9 family,i.e., 6,9-cis-octadecadienoic acid (18:2ω9), 8,11-cis-eicosadienoic acid (20:2ω9) and 20:3ω9. Significantly high levels of these fatty acids were produced during growth at low temperatures (12–20°C). On submerged cultivation at 20°C for 10 days in a 5-L fermenter containing 2% glucose plus 1% yeast extract (pH 6.0), the production of 20:3ω9 reachedca. 0.8 g/L (56 mg/g dry mycelia), accounting for 15% (by wt) of the total mycelial fatty acids. The other major fatty acids were palmitic acid (6%), stearic acid (11%), oleic acid (45%), 18:2ω9 (12%) and 20:2ω9 (3%). Studies on the distribution of fatty acids among lipid classes showed that, irrespective of the growth temperature employed (12–28°C),ca. 70% (by mol) of 20:3ω9 was present in the triglyceride and the remainder in the phospholipid fraction, especially in phosphatidylcholine (PC). When the fungus was grown at 12°C, the proportion of 20:3ω9 in the PC fraction wasca. 55%. On leave from Suntory Ltd.     

Regiospecific analysis by ethanolysis of oil with immobilized <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase

A mixture of oil/ethanol (1∶3, w/w) was shaken at 30°C with 4% immobilized Candida antarctica lipase by weight of the reaction mixture. The reaction regiospecifically converted FA at the 1- and 3-positions to FA ethyl esters, and the lipase acted on C₁₄−C₂₄ FA to a similar degree. The content of 2-MAG reached a maximum after 4 h; the content was 28–29 mol% based on the total amount of FA in the reaction mixture at 59–69% ethanolysis. Only 2-MAG were present in the reaction mixture during the first 4 h, and 1(3)-MAG were detected after 7 h. After removal of ethanol from the 4-h reaction mixture by evaporation, 2-MAG were fractionated by silica gel column chromatography. The contents of FA in the 2-MAG obtained by ethanolysis of several oils coincided well with FA compositions at the 2-position, which was analyzed by Grignard degradation. It was shown that ethanolysis of oil with C. antarctica lipase can be applied to analysis of FA composition at the 2-position in TAG.     

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model

We present a compact formula for describing the mean frictional forces acting on a molecule in multicomponent systems. The friction-based diffusion theory of Zielinski and Hanley was extended to newly include the friction-average molar velocity as a reference frame. The results showed that the previous diffusion theories are unified by the friction-average concept by properly choosing the average velocity. The present model based on the diffusivity-related molar average velocity provides better predictions for the diffusive flux in a ternary miscible liquid compared to the other existing theories. The application of the model in phase-separating ternary systems revealed that the introduction of a highly diffusive third component into demixing polymer blends promotes a particular enhancement of the spinodal decomposition due to the difference in the frictional interactions between polymers.