Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Thermal Feasibility Analyses for the 1356MWe High Conversion-Type Innovative Water Reactor for Flexible Fuel Cycle

A new reactor concept of innovative water reactor for flexible fuel cycle (FLWR) is under development at Japan Atomic Energy Agency in cooperation with Japanese reactor suppliers. A design of 1,356 MWe high conversion boiling water reactor-type FLWR core, which has an instantaneous conversion ratio of 1.04, negative void coefficient, high burnup of 65 GWd/t, and 15-month operational cycle length, has been constructed. So far, studies on thermal-hydraulic characteristics have been performed for tight lattice core. Evaluation methods for the critical power and the pressure drop under both the steady and the transient states have been established, and a modified TRAC-BF1 code has been developed for the thermal-hydraulic design of the FLWR. In this paper, the thermal feasibility of the designed 1356MWe FLWR core is analyzed by using the modified TRAC-BF1 code. The analysis is first carried out for the current core design. It is confirmed that no boiling transition (BT) occurs under the steady state. However, the minimum critical power ratio (MCPR) is only about 1.08, and the BT is confirmed occurring under the postulated abnormal transient processes. Therefore, concretizations of the conditions that ensure the thermal feasibility of a natural circulation-type FLWR and a forced circulation-type FLWR are performed. As for the results, for a forced circulation-type FLWR, the operation-limited MCPR (OLMCPR) is 1.32, and the necessary minimum core coolant flow rate is 640 kg/(m²s). For a natural circulation-type FLWR, the OLMCPR is 1.19, and the necessary minimum core coolant flow rate is 560 kg/(m²s).     

Measurement of Young’s Modulus and Poisson’s Ratio of Thermal Barrier Coating Based on Bending of Three-Layered Plate

Thermal barrier coatings (TBCs) are used to protect the hot sections of gas turbine engines and airplane engines. A TBC system comprises a substrate, bond coat, and TBC topcoat. The development of an accurate method for determining the Young’s modulus and Poisson’s ratio of TBC using a multilayered specimen is of importance. In this study, we applied the bending theory of a laminated plate to a three-layered material and proposed models to determine the Young’s modulus and Poisson’s ratio of the TBC layer using the bending strain of the TBC system specimen. Three methods were developed by utilizing (i) the coating biaxial strain, (ii) substrate biaxial strain, or (iii) coating and substrate biaxial strains. Subsequently, we determined appropriate dimensions of the specimen and span by using three-dimensional finite element analysis, and numerically verified the usefulness of the three proposed methods. However, the Young’s modulus and Poisson’s ratio determined using the multilayered specimen with a substrate are sensitive to experimental errors. Therefore, we evaluated the sensitivity of the three proposed methods to experimental error, and we determined the most insensitive method among them. Finally, we experimentally demonstrated the usefulness of this method.     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.     

Construction of Cellulose Binding Domain Fusion FMN-Dependent NADH-Azoreductase and Glucose 1-Dehydrogenase for the Development of Flow Injection Analysis with Fusion Enzymes Immobilized on Cellulose

The cellulose binding domain (CBD) of cellulosome-integrating protein A from Clostridium thermocellum NBRC 103400 was genetically fused to FMN-dependent NADH-azoreductase (AZR) and glucose 1-dehydrogenase (GDH) from Bacillus subtilis. The fusion enzymes, AZR-CBD and CBD-GDH, were expressed in Escherichia coli Rosetta-gami B (DE3). The enzymes were purified from cell-free extracts, and the specific activity of AZR-CBD was 15.1 U/mg and that of CBD-GDH was 22.6 U/mg. AZR-CBD and CBD-GDH bound strongly to 0.5 % swollen cellulose at approximately 95 and 98 % of the initial protein amounts, respectively. After immobilization onto the swollen cellulose, AZR-CBD and CBD-GDH retained their catalytic activity. Both enzymes bound weakly to 0.5 % microcrystalline cellulose, but the addition of a high concentration of microcrystalline cellulose (10 %) improved the binding rate of both enzymes. A reactor for flow injection analysis was filled with microcrystalline cellulose-immobilized AZR-CBD and CBD-GDH. This flow injection analysis system was successfully applied for the determination of glucose, and a linear calibration curve was observed in the range of approximately 0.16–2.5 mM glucose, with a correlation coefficient, r, of 0.998.     

Stopping cross-section and energy straggling of protons in SiC obtained by nuclear resonant reaction of protons with 12C and 28Si

In order to evaluate stopping cross-section and energy straggling of protons in compound material SiC and its constituents C and Si, resonant backscattering spectra have been measured using proton beams in an energy range 4.9–6.1 MeV per a 100 keV step. We have observed two sharp nuclear resonances at proton energies of 4.808 MeV by ¹²C and 4.879 MeV by ²⁸Si. By systematic analyses of the resonance peak profiles, i.e., energy shift of the peak position and broadening of the peak width, the values of the stopping cross-section and the energy straggling have been deduced to be compared with SRIM-2006 and Bohr’s prediction.     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Carbon radicals generated by solid polymers: Electron spin resonance spectroscopy for detection of species in water

Radicals generated in plastic medical devices (solid phase) by γ-rays or electron-beam irradiation during sterilization are known to cause oxidation of protein drugs, resulting in a loss or reduction in drug efficacy. The generation of radical species in water by the radical species in solid polymers has not been proved. Using electron spin resonance (ESR) spectroscopy, we confirm the generation of new radicals in water by γ-ray irradiated cyclic olefin polymers (COP). ESR measurements are obtained using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) as a spin probe and 5-(2,2-dimethyl-1,3-propoxycyclophosphoryl)-5-methyl-1-pyrroline N-oxide (CYPMPO) as a spin trap, in which the irradiated COP was immersed. The ESR signals indicate the TEMPOL radicals decline over time, suggesting the generation of new radicals. Conversely, the characteristic ESR signals of the adduct formed by the reaction between CYPMPO and the hydroxyl radical are observed. Thus, hydroxyl radicals are generated because of the migration of the radicals from COP to water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48604.     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.