Round robin on indentation fracture resistance of silicon carbide ceramics by using a powerful optical microscope

Reproducibility of indentation fracture resistance, K_IFR of silicon carbides sintered with B and C was evaluated by a round robin with ten laboratories. When the crack length was measured with an optical microscope at a low magnification of ～100×, K_IFR varied widely from 3.43 to 4.20 MPa m^1/2, whereas those obtained by a powerful microscopy with both an objective lens of 40× and a traveling stage exhibited a consistent value of 3.20±0.12 MPa m^1/2. The wide scatter of K_IFR for the former measurements was attributed mainly to the variation in misreading of the crack length. It was revealed that the high resolving power of the objective lens of 40× enabled to find exact crack tips easily, which resulted in the good matching of K_IFR between laboratories for the latter case. It was suggested that the observation of indentations with powerful optics was effective for improving the reproducibility of the IF method.     

Grafting of poly(ethylene oxide) onto C60 fullerene using macroazo initiators

In order to improve the solubility of C₆₀ fullerene in conventional solvents, grafting of hydrophilic poly(ethylene oxide) (PEO) by utilizing the radical-trapping nature of C₆₀ fullerene was investigated. Macroazo initiators containing a poly(ethylene oxide) unit, known as Azo-PEO, were prepared at various molecular weights by the reaction of 4,4′-azobis(4-cyanopentanoyl chloride) with poly(ethylene glycol) methyl ether. PEO radicals formed by thermal decomposition of Azo-PEO were successfully trapped by C₆₀ fullerene to give PEO-grafted C₆₀ fullerene. Their structures were confirmed by FT-IR spectroscopy, size exclusion chromatography, UV-vis spectroscopy, and differential scanning calorimetry. When Azo-PEO with low-molecular weight was reacted with C₆₀ fullerene, a bis-adduct, C₆₀-(PEO)₂, and a tetrakis-adduct, C₆₀-(PEO)₄, were formed. In contrast, in reactions with Azo-PEO of higher molecular weight, only the bis-adduct was formed, and no formation of the tetrakis-adduct was observed. The structure of bis-adduct was found to be 1,4-type. The solubility of C₆₀ fullerene in water, THF, methanol, and other conventional organic solvents was remarkably improved by grafting of PEO. In addition, the thermal stability of PEO was dramatically increased by grafting onto C₆₀ fullerene.     

Combinatorial Measurement of CDKN1A/p21 and KIF20A Expression for Discrimination of DNA Damage-Induced Clastogenicity

In vitro mammalian cytogenetic tests detect chromosomal aberrations and are used for testing the genotoxicity of compounds. This study aimed to identify a supportive genomic biomarker could minimize the risk of misjudgments and aid appropriate decision making in genotoxicity testing. Human lymphoblastoid TK6 cells were treated with each of six DNA damage-inducing genotoxins (clastogens) or two genotoxins that do not cause DNA damage. Cells were exposed to each compound for 4 h, and gene expression was comprehensively examined using Affymetrix U133A microarrays. Toxicogenomic analysis revealed characteristic alterations in the expression of genes included in cyclin-dependent kinase inhibitor 1A (CDKN1A/p21)-centered network. The majority of genes included in this network were upregulated on treatment with DNA damage-inducing clastogens. The network, however, also included kinesin family member 20A (KIF20A) downregulated by treatment with all the DNA damage-inducing clastogens. Downregulation of KIF20A expression was successfully confirmed using additional DNA damage-inducing clastogens. Our analysis also demonstrated that nucleic acid constituents falsely downregulated the expression of KIF20A, possibly via p16 activation, independently of the CDKN1A signaling pathway. Our results indicate the potential of KIF20A as a supportive biomarker for clastogenicity judgment and possible mechanisms involved in KIF20A downregulation in DNA damage and non-DNA damage signaling networks.     

基于累积损伤理论的土石坝地震永久变形分析

以龙冈的在不规则荷载作用下土体应变的累积损伤理论为基础,提出了基于累积损伤理论的土石坝地震永久变形分析方法。采用大型静力和动力三轴仪,对某土石坝筑坝材料的静动变形特性进行了试验研究,确定了筑坝材料的静力和动力应力应变关系、累积应变模型和相应的材料参数。利用该方法,分别对在日本2008年6月14日岩手—宫城内陆M7.2级地震作用下该土石坝的在建坝体和竣工后坝体的地震永久变形特性进行了研究。结果表明：在建坝体的坝内沉降计算值与现场实测值基本吻合,并且通过与其它土石坝实测值的比较,说明竣工后坝体的坝顶沉降预测值在合理范围之内。     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Thermal Feasibility Analyses for the 1356MWe High Conversion-Type Innovative Water Reactor for Flexible Fuel Cycle

A new reactor concept of innovative water reactor for flexible fuel cycle (FLWR) is under development at Japan Atomic Energy Agency in cooperation with Japanese reactor suppliers. A design of 1,356 MWe high conversion boiling water reactor-type FLWR core, which has an instantaneous conversion ratio of 1.04, negative void coefficient, high burnup of 65 GWd/t, and 15-month operational cycle length, has been constructed. So far, studies on thermal-hydraulic characteristics have been performed for tight lattice core. Evaluation methods for the critical power and the pressure drop under both the steady and the transient states have been established, and a modified TRAC-BF1 code has been developed for the thermal-hydraulic design of the FLWR. In this paper, the thermal feasibility of the designed 1356MWe FLWR core is analyzed by using the modified TRAC-BF1 code. The analysis is first carried out for the current core design. It is confirmed that no boiling transition (BT) occurs under the steady state. However, the minimum critical power ratio (MCPR) is only about 1.08, and the BT is confirmed occurring under the postulated abnormal transient processes. Therefore, concretizations of the conditions that ensure the thermal feasibility of a natural circulation-type FLWR and a forced circulation-type FLWR are performed. As for the results, for a forced circulation-type FLWR, the operation-limited MCPR (OLMCPR) is 1.32, and the necessary minimum core coolant flow rate is 640 kg/(m²s). For a natural circulation-type FLWR, the OLMCPR is 1.19, and the necessary minimum core coolant flow rate is 560 kg/(m²s).     

Measurement of Young’s Modulus and Poisson’s Ratio of Thermal Barrier Coating Based on Bending of Three-Layered Plate

Thermal barrier coatings (TBCs) are used to protect the hot sections of gas turbine engines and airplane engines. A TBC system comprises a substrate, bond coat, and TBC topcoat. The development of an accurate method for determining the Young’s modulus and Poisson’s ratio of TBC using a multilayered specimen is of importance. In this study, we applied the bending theory of a laminated plate to a three-layered material and proposed models to determine the Young’s modulus and Poisson’s ratio of the TBC layer using the bending strain of the TBC system specimen. Three methods were developed by utilizing (i) the coating biaxial strain, (ii) substrate biaxial strain, or (iii) coating and substrate biaxial strains. Subsequently, we determined appropriate dimensions of the specimen and span by using three-dimensional finite element analysis, and numerically verified the usefulness of the three proposed methods. However, the Young’s modulus and Poisson’s ratio determined using the multilayered specimen with a substrate are sensitive to experimental errors. Therefore, we evaluated the sensitivity of the three proposed methods to experimental error, and we determined the most insensitive method among them. Finally, we experimentally demonstrated the usefulness of this method.     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.