Mechanical behaviour and formulation of stress-strain relation for non-linear viscoelastic cellulose nitrate under cyclic loadings

The cyclic deformations under various repeated stresses are quantitatively investigated using non-linear viscoelastic cellulose nitrate heated to 60° C. The non-elastic strain or creep-plastic strain is remarkably influenced by the repeated stress and the stress rate. The cyclic deformations corresponding to the repeated stress less than a certain stress level attain the saturated state called the shake down after some cycles. The stress-strain relations of the non-linear viscoelastic media in the loading and unloading processes are deduced from the invariant theory using an hypothesis of creep potential. The non-linear viscoelastic observations obtained on the cellulose nitrate at 60° C under cyclic loadings are found to fit the deduced relations for the loading and unloading processes independent of the repeated stress and the stress rate.     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

铝合金局部加压凝固及流动数值模拟的研究

局部加压方法是压铸中用于消除铸件厚壁处缩孔缺陷的一种新工艺.本研究通过实验模型测量了不同加压条件下铸件的冷却曲线,分析了局部加压引起的凝固变化.考虑局部加压引起的补缩流动,通过适时修改网格文件、初始和边界条件的方法,模拟了局部加压过程中铝合金的凝固及流动变化,并与实验结果进行了对比,二者基本吻合.     

Alzheimer’s Disease Animal Models: Elucidation of Biomarkers and Therapeutic Approaches for Cognitive Impairment

Alzheimer’s disease (AD) is an age-related and progressive neurodegenerative disorder. It is widely accepted that AD is mainly caused by the accumulation of extracellular amyloid β (Aβ) and intracellular neurofibrillary tau tangles. Aβ begins to accumulate years before the onset of cognitive impairment, suggesting that the benefit of currently available interventions would be greater if they were initiated in the early phases of AD. To understand the mechanisms of AD pathogenesis, various transgenic mouse models with an accelerated accumulation of Aβ and tau tangles have been developed. However, none of these models exhibit all pathologies present in human AD. To overcome these undesirable phenotypes, APP knock-in mice, which were presented with touchscreen-based tasks, were developed to better evaluate the efficacy of candidate therapeutics in mouse models of early-stage AD. This review assesses several AD mouse models from the aspect of biomarkers and cognitive impairment and discusses their potential as tools to provide novel AD therapeutic approaches.     

Net shape formation of sub-micron alumina with reduced flaws by high-speed centrifugal compaction process

A new compacting method for powder materials is presented. High-Speed Centrifugal Compaction Process (HCP) utilizes centrifugal force of about 10,000 g for the compaction. HCP is suitable for net shape compaction of fine sub-micron and nano-powders. HCP possesses a unique compacting mechanism that is different from other colloidal processes including Pressure Casting (PC), and has a number of useful characteristics. HCP has a higher compacting speed than PC, wide applicability for net shape formation, as well as a defect removing function. Because of homogeneous and flawless green microstructure, HCP alumina shows superior sinterability and higher strength and hardness than most of other aluminas. This article is based on a presentation made in the symposium “The 3rd KIM-JIM Joint Symposium on Advanced Powder Materials“, held at Korea University, Seoul, Korea, October 26–27, 2001 under auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

Comparison of coal hydroliquefaction catalysed by ZnCl2-MCln (CuCl,CrCl3 and MoCl5) and ZnCl2 melts

Hydrogenation of four bituminous coals impregnated with 5 wt% of either mixtures of ZnCl₂-MCl_n (CuCl, CrCl₃ and MoCl₅) systems or ZnCl₂ was carried out using a batch autoclave system at 400° for 3 h at 9.8 MPa of initial hydrogen pressure. The ZnCl₂-MoCl₅ system showed the highest yield of the hexane-soluble (HS) fraction compared with the other systems irrespective of the coal used. The difference between the yields of HS fractions using the ZnCl₂-MoCl₅ and other systems was most marked for coals of fairly low volatile matter content, though the conversion was relatively low (47–66%), whilst for coals of high volatile matter content HS yields with the binary melt systems were high (86–91% conversion). Elemental analyses of the HS fractions indicated that the ZnCl₂-MoCl₅ system is most favourable in decreasing the average molecular weight and the heteroatom content of HS, this characteristic trend being confirmed also with five HS fractions separated by Chromatographic techniques. Both elemental analyses and molecular weights of asphaltene (benzene-soluble materials, BS) indicated that the ZnCl₂-MoCl₅ system is also most effective in cracking coal structure.     

Influence of Metal Ions on the Order-Disorder Transition Temperature of the Ba-M-O (M: La, Y, In, or Ga) System

Preparation of BaLa₂O₄, B_a3,Y₄O₉, B_a,In₂O₅, and Ba₃Ga₂O₆ powders and their sintering were investigated in Ar or air. These sintered bodies with perovskite-related structure were synthesized by reaction sintering, using mixed powders in the atomic ratios of Ba/La = 1, Ba/Y = 0.75, Ba/In = 1, and Ba/Ga = 1.5. The order-disorder transition temperatures of the BaLa₂O₄, Ba₃Y₄O₉, Ba₂In₂O₅, and Ba₃Ga₂O₆ sintered bodies were 270°, 350°, 880°, and 123O^oC, respectively. It was found that the temperatures were influenced by the ionic radius of cations in B sites, and the transition temperatures decreased with increasing ionic radius.     

Effects of bile acid feeding on hepatic deoxycholate 7α-hydroxylase activity in the hamster

In order to investigate the effects of bile acid feeding on hepatic microsomal deoxycholate 7α-hydroxylase activity, three different bile acids were administered (0.2% w/w in chow) to hamsters for two weeks. Deoxycholate 7α-hydroxylase activity was increased markedly by feeding of cholic acid (CA) and slightly by deoxycholic acid (DCA) Chenodeoxycholic acid (CDCA) had little effect on the enzyme activity. Feeding each of the bile acids significantly inhibited the activity of cholesterol 7α-hydroxylase in the order CDCA≥ DCA>CA. There was no correlation between deoxycholate 7α-hydroxylase activity and cholesterol 7α-hydroxylase activity. It is concluded that the activity of deoxycholate 7α-hydroxylase is up-regulated by feeding DCA and CA and that the mechanism seems to be different from that of cholesterol 7α-hydroxylase. The increased activity of hepatic deoxycholate 7α-hydroxylase by CA and DCA should be beneficial in minimizing the toxic effects of DCA in the hamster.