Evaluation of energy technologies to realize sustainable systems

Degradation of the global environment and depletion of resources are threatening sustainable development of mankind. In particular, climate change caused by increasing greenhouse gases is one of the most serious issues in analyzing energy systems. This paper aims at proposing frameworks to investigate sustainability and at evaluating technologies for sustainable energy systems. For this purpose, we first define the index of sustainable limits on resource depletion and emissions. Sustainability of mineral and energy resources is evaluated based on the index. Estimations indicate that energy resources and CO₂ are unsustainable, and that we should introduce technologies to reduce energy consumption and CO₂ emissions. Life cycle energy requirements are assessed for photovoltaic systems as representatives of the technologies. Through the life cycle assessment, we quantitatively evaluate measures to improve life cycle energy requirements and capital costs. At the same time, we clarify the direction of research and development required for technologies to realize sustainable energy systems. © 1999 Scripta Technica, Electr Eng Jpn, 130(2): 25–31, 2000     

Development of a simulator to calculate an optimal slab heating pattern for reheat furnaces

To improve energy consumption and to meet quality requirements for the slab heating process of reheat furnaces in hot strip mills, a new optimal slab heat pattern calculation simulator has been developed. The simulator consists of the following functions; (1) two-dimensional (slab thickness direction and slab length direction) slab temperature calculation function, which is capable of calculating skidmarks along the length of a slab, (2) furnace heat balance calculation function, (3) optimizing calculation function of slab heat pattern using a linear programming method. The simulator developed has been installed into a furnace computer control system for an actual plant. This paper describes the functions of the simulator and simulation results using the simulator. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 120 (3): 42–53, 1997     

日本寒地北海道稻作极限地带糯米外观品质的年度间地区间差异及其产生因素（网络首发、推荐阅读）

在六个种植地区及四个年度调查了北海道最寒冷的稻作地带生产的糯米外观品质。在不同年度之间,障碍型冷害危险期的平均气温和抽穗后40天之间的日平均累计气温（灌浆气温）越高,使得秕粒比率越低,千粒重越重,产量越高,整粒比率越高,未熟粒、受害粒及着色粒比率越低,大米蛋白质含量越低,糙米白度和大米白度越高。而在不同地区之间,这些关系不是很明确。这是由于各生育期的气温、生育特性以及整粒、未熟粒比率的变动（最小值与最大值之差以及变异系数）其年度间要比地区间大。但是,受害粒和着色粒比率其变动年度间要比地区间小,年度和地区综合分析时当灌浆气温分别为845、857 ℃时为最低,显示二次回归的关系。另外,整粒比率在年度间和地区间变化,受害粒和着色粒只在年度间变化;这些指标越差,同一年度时的地区间、同一地区时的年度间的变异系数就越大。烘干后半透明的阴糯籽粒与乳白不透明的糯米籽粒之间,其蛋白质含量、淀粉含量、淀粉颗粒的大小、纯化淀粉的碘吸收曲线最大吸收波长、吸光度等理化特性以及年糕面胚的明度基本上没有差异,且年糕面胚物理特性的差异不大,因此混有阴糯籽粒的糯米并不影响年糕面胚加工。与粳稻花粉杂交的糯稻品种胚乳变成粳性的异粉籽粒,其秕粒发生较多;虽然粳稻和糯稻的田块距离越远秕粒发生就越少,但是隔离距离600 m时也有发生。北海道为了避免糯米品质下降,在远离粳稻品种的地区种植糯稻。     

Analysis of capacitance ratio of a rectangular X-cut length-extensional mode quartz crystal resonator by stresses

The electrical properties of an X-cut, length-extensional mode quartz crystal resonator of a cut angle theta around the X-axis were calculated by a variational method using stresses as trial functions. Analytical expressions of stresses were estimated by a linear regression on a cut angle best-fit to the results of finite-element method. The calculated dependence of the capacitance ratio on the cut angle was consistent with the measured results.     

Synthesis of a lithium-encapsulated fullerenol and the effect of the internal lithium cation on its aggregation behavior

A lithium-encapsulated fullerenol Li@C₆₀(OH)₁₈, as an example of a polar solvent-soluble endohedral fullerene derivative, has been synthesized and fully characterized by infrared spectroscopy, nuclear magnetic resonance spectroscopy, UV spectroscopy, electron spin resonance (ESR) spectroscopy, matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS), elemental analysis, thermogravimetric analysis, and inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and the particle size was determined using the induced grating (IG) method, and scanning probe microscopy. The encapsulated Li⁺ was clearly detected by ⁷Li NMR at very high field in the range −15 to −19 ppm, an intermediate lithium-encapsulated fullerenol was detected by MALDI-TOF-MS, and the molar ratio of lithium-encapsulated fullerenol to empty fullerenol was quantitatively determined to be 12:88 by ICP-AES. The solid-state ESR and particle size measurements using the IG method showed the characteristic anionic behavior with no external counter cations, in what can be called a “cation-encapsulated anion nanoparticle”, revealing the drastic differences between its properties and those of empty C₆₀(OH)₁₆.      

Widening of harvesting layer and area of P3HT/PCBM bulk-heterojunction photovoltaic cells

We have fabricated P3HT/PCBM based bulk-heterojunction photovoltaic cells with P3HT layer as the hole transport layer and PCBM layer as the electron transport layer between electrode and blended P3HT/PCBM layer in order to widen the photon harvesting layer. Current density has increased by about 1 mA/cm² by the insertion of P3HT layer and the resulting conversion efficiency has been improved by about 20%. We have also fabricated a centimeter-scale active area with an efficiency of ∼1%.     

Status of ceramic breeder pebble bed thermo-mechanics R&D and impact on breeder material mechanical strength

Among the international fusion solid breeder blanket community, there exists steady progress on the experimental, phenomenological, and numerical characterizations of the pebble bed effective thermo physical and mechanical properties, and of thermomechanic state of the bed under prototypical operating conditions. This paper summarizes recent achievements in pebble bed thermomechanics that were carried out by members of the IEA Fusion Nuclear Technology Subtask I Solid Breeding Blanket. A major goal is on developing predictive capability while identifying a pre-conditioned equilibrium stress state that would warrant pebble bed integrity during operations. The paper reviews and synthesizes existing computational modeling approaches for pebble bed thermomechanics prediction, and differentiating points of convergence/divergence among existing approaches. The progress toward modeling benchmark is also discussed. These advancements have led to a framework to help navigate future research.     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

A calculation methodology proposed for liquid droplet impingement erosion

Bent pipe wall thinning has been often found at the elbow of the drain line and the high-pressure secondary feed-water bent pipe in nuclear reactors. Liquid droplet impingement (LDI) erosion could be regarded as one of the major causes and is a significant issue of the thermal hydraulics and structural integrity in aging and life extension for nuclear power plant safety. In this paper a computational methodology is established for simulation of LDI erosion using computational fluid dynamics (CFD) simulation and theoretical calculation. Two-phase flow numerical simulations are conducted for standard elbow geometry, typically with the pipe diameter of 170 mm. This computational fluid model is built up by incompressible Reynolds Averaged Navier–Stoke equations using standard k–? turbulence model and the SIMPLE algorithm, and the numerical droplet model adopts the Lagrangian approach. The turbulence damping in vapor–droplets flow is theoretically analyzed by a damping function on the energy spectrum basis of single phase flow. Locally, a droplet impact angle function is employed to determine the overall erosion rate. Finally, the overall and local investigations are combined to purpose a general methodology of LDI erosion prediction procedure, which has been complemented into CFD code. Based on our more physical computational results, comparison with an available accident data was made to prove that our methodology could be an appropriate way to simulate and predict the bent pipe wall thinning phenomena.