Design and fabrication of a length-extensional mode rectangular X-cut quartz resonator with zero temperature coefficient.

Rectangular X-cut quartz crystal resonators with cut angles theta > 5.0 degrees and aspect ratios Rzy (= width 2z0/length 2y0) from 0.3 to 0.5 are investigated. The resonators oscillate mode is a length-extensional mode. A semiempirical frequency equation was derived from the stress expressed in terms of the trigonometric and the hyperbolic transcendental functions with constants estimated by the regression curve fit to the stress simulated by the finite-element method (FEM). Contours on which a point satisfies a zero first order temperature coefficient condition are shown in a cut angle theta and Rzy diagram. We proved that a fabricated resonator with Rzy = 0.400 and theta = 16.0 degrees, whose design parameter is located in the area of the contour, had a zero temperature coefficient.     

Physical model of drain conductance, gd, degradation ofNMOSFET's due to interface state generation by hot carrierinjection

Degradation of analog device parameters such as drain conductance, g_d, due to hot carrier injection has been modeled for NMOSFET's. In this modeling, mobility reduction caused by interface state generation by hot carrier injection and the gradual channel approximation were employed. It has been found that g_d degradation can be calculated from linear region transconductance, g_m, degradation which is usually monitored for hot carrier degradation of MOSFET's. The values of g_d degradation calculated from g_m degradation fit well to the measured values of g_d degradation The dependence of the g_d degradation lifetime on L_eff has been also studied, this model also provides an explanation of the dependence on L_eff. The model is then useful for lifetime predictions of analog circuits in which g_d degradation is usually more important than g_m degradation     

Application of step‐response test for evaluation of uncertainty of standard measuring system for lightning‐impulse high voltage

In evaluating the uncertainty of the standard measuring system for lightning‐impulse high voltages, which is composed of a standard voltage divider, a digital recorder, and calibrators, step‐response tests of the standard voltage divider may be useful. In this paper, a convolution algorithm is employed to calculate the output impulse voltage waveforms from measured step‐response waveforms. The uncertainties of peak‐value measurement due to the influence of the nominal epoch, uncertainty of the peak‐value measurement due to dispersion of the AC scale factor, and uncertainty of the virtual front‐time measurement due to long‐term stability are evaluated. Furthermore, the error of the virtual front time of the output waveforms is discussed. The front part of the step‐response waveform, t≤ T₃₀%, does not influence the error of the virtual front time. Therefore, for the standard voltage divider, the step‐response parameters, that is, the experimental response time, partial response time, settling time, and overshoot, have almost nothing to do with the error of the virtual front time. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 24–32, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21279     

An FPGA implementation of hard‐wired sequence control system based on PLC software

Although a programmable logic controller (PLC) has been widely adopted for the sequence control of industrial machinery, its performance does not always satisfy the recent requirements in large and highly responsive systems. With the state‐of‐the‐art field programmable gate array (FPGA) technology, it is possible to implement a control program with hard‐wired logic for higher response and reduced implementation cost/space. This approach is also worthwhile for transmigration of legacy PLC software into forthcoming FPGA‐based control hardware. This study presents a systematic method to implement a hard‐wired sequence control from PLC software. PLC instructions are converted into VHDL codes, and then implemented as logic circuit with various peripheral functions. Productive PLC programs were examined with Mitsubishi Electric FX2N PLC and Altera Stratix II FPGA, and were shown to fit into a common FPGA chip. A straightforward Sequential design was estimated to be 184 times faster than PLC, while a performance‐oriented Flat design was estimated to be 44 times faster than Sequential design (i.e., 8050 times faster than PLC). A practical perfect layer winder system was actually built and successfully operated with our FPGA control board, whose logic design was implemented with our tools. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Glucosamine Extends the Lifespan of Caenorhabditis elegans via Autophagy Induction

Glucosamine (GlcN) is commonly used as a dietary supplement to promote cartilage health in humans. We previously reported that GlcN could induce autophagy in cultured mammalian cells. Autophagy is known to be involved in the prevention of various diseases and aging. Here, we showed that GlcN extended the lifespan of the nematode Caenorhabditis elegans by inducing autophagy. Autophagy induction by GlcN was demonstrated by western blotting for LGG-1 (an ortholog of mammalian LC3) and by detecting autophagosomal dots in seam cells by fluorescence microscopy. Lifespan assays revealed that GlcN-induced lifespan extension was achieved with at least 5 mM GlcN. A maximum lifespan extension of approximately 30 % was achieved with 20 mM GlcN (p<0.0001). GlcN-induced lifespan extension was not dependent on the longevity genes daf-16 and sir-2.1 but dependent on the autophagy-essential gene atg-18. Therefore, we suggest that oral administration of GlcN could help delay the aging process via autophagy induction.     

Deletion and insertion of a 192-residue peptide in the active-site domain of glycosyl hydrolase family-2 beta-galactosidases

The monomeric multimetal-binding beta-galactosidase of Saccharopolyspora rectivirgula (srbg), a glycosyl hydrolase family-2 enzyme, has a unique sequence consisting of 192 amino acid residues with no similarity to known proteins. This 192-residue sequence (termed the "iota [iota] sequence") appears to be inserted into a sequence homologous to the active-site domain of the Escherichia coli lacZ enzyme (lacZbg). To assess the effects of the t sequence at specific sites of beta-galactosidase on the catalytic functioning and molecular properties of beta-galactosidase, deletion or insertion mutants of beta-galactosidases were constructed, expressed in LacZ- E. coli strains, and characterized: srbgdelta in which the iota sequence was deleted from srbg, and lacZbgI, in which the 192-residue iota sequence was inserted into the corresponding position (between Asp591 and Phe592) in the active-site domain of lacZbg. srbgdelta was a catalytically inactive, dimeric protein which retained multimetal-binding characteristics, suggesting that the iota sequence is very important for maintaining the structure necessary for the catalytic functioning and the monomeric structure of srbg but is not responsible for the unique metal ion requirements of srbg. On the other hand, lacZbgI existed as a mixture of a monomer, a tetramer, and higher multimers. The monomeric species was inactive, whereas the tetramer and other multimers were catalytically active (V(max )K(m) value, 25% of that of lacZbg) and highly specific for beta-D-galactoside. The tetrameric lacZbgI was activated by Mg2+ and Mn2+ with lowered metal affinities, and the stoichiometry of metal binding was unchanged from that of lacZbg. These results, along with the published stereo structure of lacZbg, suggest that, in lacZbgI, the inserted 192-residue iota peptide could fold independently of the lacZbg domains into a "sub-domain," lying distant from the active site and subunit interfaces.     

Novel sugar phosphotransferase system applicable to the efficient labeling of the compounds synthesized via the non-mevalonate pathway in Escherichia coli

It is known that 1-deoxy-D-xylulose taken up by Escherichia coli is used as the precursor of the compounds synthesized via the non-mevalonate pathway, such as isoprenoids, probably after conversion into 1-deoxy-D-xylulose 5-phosphate. In this report, we show that a novel phospho(enol) pyruvate-dependent phosphotransferase system catalyzes the uptake and phosphorylation of 1-deoxy-D-xylulose.     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.