Tuning catalytic performances of cobalt catalysts for clean hydrogen generation via variation of the type of carbon support and catalyst post-treatment temperature

Multi-walled carbon nanotubes, three types of activated carbons, single wall carbon nanotube and reduced graphene oxides were used to synthesize nano-sized Co catalysts for H₂ preparation via NH₃ decomposition. Catalyst samples were characterized by number of techniques such as N₂ physisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopes (XPS), Transmission electron microscopy (TEM), CO chemisorption, temperature-programmed reduction (H₂-TPR) and temperature-programmed desorption (N₂-TPD). The catalytic activities of the studied catalysts for H₂ production via NH₃ decomposition were measured in a fixed-bed micro-reactor. Co catalyst supported on multi-wall carbon nanotubes has shown the highest catalytic activity. The Co particles size was significantly affected by the variation of the post-treatment temperature. The Co particles size in the range of 4.7–64.8 nm can be effectively controlled by varying post-treatment temperature between 230 and 700 °C. The maximum TOF of NH₃ decomposition was registered on cobalt catalyst post-treated at 600 °C.     

Effect of direct ovarian injection of vascular endothelial growth factor gene fragments on follicular development in immature female rats

Vascular endothelial growth factor (VEGF) expression in granulosa cells is associated with the thecal vasculature growth during ovarian follicular development. We hypothesized that injection of VEGF gene fragments directly into the rat ovary would induce production of a large number of ovulatory follicles and that these follicles would ovulate. To test this hypothesis, we treated immature female rats with combinations of hormones and VEGF gene fragments. The animals were divided into two groups: one group received solution containing transfection reagents as a control (n = 5), while the other group received direct ovarian injection of VEGF gene fragments at 19 (n = 5), 21 (n = 5), 23 (n = 5), or 25 (n = 5) days after birth followed by i.p. administration of 20 IU equine chorionic gonadotropin (eCG) at the age of 26 days. Forty-eight hours after eCG injection, animals were given 20 IU human chorionic gonadotropin (hCG) i.p. and then the oocytes in both groups were counted. The maximum number of ovulated oocytes was obtained when the VEGF gene fragments were injected into the rat ovary at 21 days after birth. Histological examination revealed that the injection of VEGF gene fragments markedly increased the vascular density around the preovulatory follicles and also the number of these follicles. Our data provide the first reported evidence that most ovulatory follicles generated by injection of VEGF gene fragments are able to ovulate upon hCG treatment. These results demonstrate that injection of VEGF gene fragments directly into the ovary stimulates the development of antral follicles by inducing the formation of thecal vasculature in immature female rats.     

Electrochemical behavior of Al in a non-aqueous alkyl carbonate solution containing LiBOB salt

Aluminum was studied as a current collector for rechargeable lithium batteries to understand electrochemical and passivation behavior. Electrochemical polarization tests, in situ scratch polarization tests and time-of-flight secondary ion mass spectroscopy (ToF-SIMS) analysis in lithium bis-oxalato borate (LiBOB)-containing alkyl carbonate solution were conducted. The Al foil did not follow the alloy and de-alloy process with the LiBOB salt in electrolyte at 0 V vs. Li/Li⁺ in the cathodic sweep. During the anodic scan to the noble direction, the absence of an oxidation peak up to 3 V vs. Li/Li⁺ indicated that the air-formed oxide layer of Al was not reduced to metal. Oxide-free Al surfaces made by the in situ scratch test during the electrochemical polarization resulted in abrupt alloy formation with Li at 0 V vs. Li/Li⁺, but the newly formed surface formed passive films at higher potential with oxygen, namely, Al-O compound, as confirmed by ToF-SIMS.     

Transmission electron microscopic study on supramolecular nanostructures of bacteriochlorophyll self-aggregates in chlorosomes of green photosynthetic bacteria

Supramolecular nanostructures of bacteriochlorophyll (BChl) self-aggregates in major light-harvesting complexes (chlorosomes) of green photosynthetic bacteria were successfully observed by freeze-fracture transmission electron microscope. Rod-shaped nanostructures with approximately 10 nm in diameter could be visualized in three types of green sulfur bacteria (Chlorobium). Diameter of the rod-shaped nanostructures in Chlorobium chlorosomes was independent of the molecular structures of their light-harvesting pigments, namely BChl-c or d. In contrast, chlorosomes of the green filamentous bacterium Chloroflexus aurantiacus had rod-shaped nanostructures with approximately 5 nm in diameter. The present results support that BChl self-aggregates in chlorosomes form rod-shaped nanostructures called rod-elements with approximately 10- and 5-nm diameters for Chlorobium and Chloroflexus, respectively.     

DNA microarray analysis suggests that zinc pyrithione causes iron starvation to the yeast Saccharomyces cerevisiae

Zinc pyrithione has been used in anti-dandruff shampoos and in anti-fouling paint on ships. However, little is known of its mode of action. We characterized the effects of sub-lethal concentrations of zinc pyrithione (Zpt) on Saccharomyces cerevisiae using DNA microarrays. The majority of the strongly upregulated genes are related to iron transport, and many of the strongly downregulated genes are related to the biosynthesis of cytochrome (heme). These data suggest that Zpt induces severe iron starvation. To confirm the DNA microarray data, we supplemented cultures containing Zpt with iron, and the growth of the yeast was restored significantly. From these results, we propose that the principal toxicity of zinc pyrithione arises from iron starvation.     

Amplified fragment length polymorphism of the AWA1 gene of sake yeasts for identification of sake yeast strains

Sake yeasts are used for sake brewing and have a crucial role in the quality of sake, since they produce not only ethanol but also various compounds that provide sake flavors. Therefore, the appropriate selection and monitoring of a strain used in sake mash is important. However, the identification of specific sake yeast strains has been difficult, because sake yeasts have similar characteristics in taxonomic and physiological analyses. We found amplified fragment length polymorphisms (AFLPs) in the PCR products of the AWA1 gene of sake yeast strains. The AWA1 gene encodes a cell wall protein that is responsible for foam formation in sake mash. This polymorphism of the AWA1 gene can be used for the identification of sake yeast strains.     

Anti-obesity and anti-diabetic effects of ethanol extract of Artemisia princeps in C57BL/6 mice fed a high-fat diet

Artemisia princeps is commonly used as a food ingredient and in traditional Asian medicine. In this study, we examined the effects of long-term administration of an ethanol extract of A. princeps (APE) on body weight, white adipose tissue, blood glucose, insulin, plasma and hepatic lipids, and adipocytokines in C57BL/6 mice fed a high-fat diet. Daily feeding of a 1% APE diet for 14 weeks normalized elevated body weight, white adipose tissue, and plasma glucose and insulin levels, and delayed impaired glucose tolerance in mice a fed high-fat diet. These events were not observed in mice fed a control diet containing 1% APE. Liver triglyceride and cholesterol levels were similar in mice fed a 1% APE-diet and those fed a control diet. In the high-fat diet groups, APE inhibited hepatic fatty acid synthase (FAS) and suppressed the elevation of plasma leptin, but had no effect on adiponectin levels. These findings suggest that the regulation of leptin secretion by APE may inhibit FAS activity with subsequent suppression of triglyceride accumulation in the liver and adipose tissues. Inhibition of lipid accumulation can, in turn, lead to improvements in impaired glucose tolerance.     

A new approach to species determination for yeast strains: DNA microarray-based comparative genomic hybridization using a yeast DNA microarray with 6000 genes

DNA-DNA hybridization is known as the superior method in the elucidation of relationships between closely related taxa, such as species and strain. For species determination we propose a new DNA-DNA hybridization method: the DNA microarray-based comparative genomic hybridization (CGH) method, using a yeast DNA microarray with approximately 6000 genes. The genome from a yeast strain as a sample strain (Sample) was labelled with Cy3-dye and hybridized to a single DNA microarray, together with the Cy5-labelled genome of S. cerevisiae S288C as a reference strain (Reference). The log2 ratio values [log2[Cy3(Sample)/Cy5(Reference)]: Ratio] of signal intensities of all the gene spots were estimated and divided into the following groups: Ratio < or = -1; -1 < Ratio < 1; 1 < or = Ratio. The hybridization profiles of the genomes of type strains belonging to the genus Saccharomyces were significantly different from that of S. cerevisiae S288C. The Ratio-based grouping allowed us to discriminate between some species from S. cerevisiae more clearly. Furthermore, cluster analysis discriminated between closely related species and strains. Using this method, we were able to not only perform species determination but also to obtain information on alternation in gene copy number of such gene amplifications and deletions with single-gene resolution. These observations indicated that DNA microarray-based CGH is a powerful system for species determination and comparative genome analysis.