In situ TEM study on changes in structure and electrical conductance of carbon nanotube-gold contact induced by local joule heating

Electrical conductance of multi-walled carbon nanotubes (MWCNTs) with closed and open tips contacting with a gold (Au) electrode was studied by in situ transmission electron microscopy. When a current density through the contact region reached a threshold value of 2.6 × 10⁸ A/cm², the MWCNT tip was embedded into the Au surface by local melting of Au, and the total resistance was reduced with the increase of the contact area. Conductance per unit area at the contact between the MWCNT and Au electrode for the open-ended MWCNT is four times larger than that for the close-ended one, which is due to the direct connection of inner walls of the open-ended MWCNT with the Au surface.     

Forgetting curve of cricket,Gryllus bimaculatus,derived by using serotonin hypothesis

It is thought that the adjustment of intraspecific aggression is an essential factor in the development of a social structure. To understand the natural laws for organizing the social structure, we focus on the fighting behavior of crickets, Gryllus bimaculatus, and investigate the neuronal mechanisms to adjust aggressiveness associated with a neuromodulatory biological amine: serotonin (5-HT).In this paper, we present a working theory of a neurophysiological mechanism based on the past biological studies on the 5-HT hypothesis, and a mathematical model of the mechanism. We analyzed this model and concluded that this neurophysiological mechanism makes the forgetting process slower. Next, we fitted our theoretical forgetting curve to an experimental curve and estimated the parameters of our model. These estimated values were in agreement with common belief in biological science.     

An overview on the cellulose based conducting composites

Biopolymer based composites have been employed in numerous applications with increasing interest not only due to renewable, eco-friendly nature, but also because of the flexibility in processing conditions and competitive cost of their end products. The conductive materials from biopolymers have been found applicable in robots, medical imaging, sensitive membranes, actuators, visual displays, electronic wiring and shielding, and components in batteries. Cellulose is one of the most abundant biopolymers in the nature, which has received special attention for development of conducting materials due to biocompatibility for protein and drug immobilization and ability to form the composites with synthetic polymers. The present review is aimed to provide concisely the current status in this field of conducting composites from cellulose, with brief discussions of associated problems and future applications.     

Total reflection X-ray spectroscopy as a rapid analytical method for uranium determination in drainage water

Uranium concentrations in drainage water are typically determined by α-spectrometry. However, due to the low specific radioactivity of uranium, the evaporation of large volumes of drainage water, followed by several hours of measurements, is required. Thus, the development of a rapid and simple detection method for uranium in drainage water would enhance the operation efficiency of radiation control workers. We herein propose a novel methodology based on total reflection X-ray fluorescence (TXRF) for the measurement of uranium in contaminated water. TXRF is a particularly desirable method for the rapid and simple evaluation of uranium in contaminated water, as chemical pretreatment of the sample solution is not necessary, measurement times are typically several seconds, and the required sample volume is low. We herein employed sample solutions containing several different concentrations of uranyl acetate with yttrium as an internal standard. The solutions were placed onto sample holders, and were dried prior to TXRF measurements. The relative intensity, otherwise defined as the net intensity ratio of the Lα peak of uranium to the Kα peak of yttrium, was directly proportional to the uranium concentration. Using this method, a TXRF detection limit for uranium in contaminated water of 0.30 µg/g was achieved.     

Tuning catalytic performances of cobalt catalysts for clean hydrogen generation via variation of the type of carbon support and catalyst post-treatment temperature

Multi-walled carbon nanotubes, three types of activated carbons, single wall carbon nanotube and reduced graphene oxides were used to synthesize nano-sized Co catalysts for H₂ preparation via NH₃ decomposition. Catalyst samples were characterized by number of techniques such as N₂ physisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopes (XPS), Transmission electron microscopy (TEM), CO chemisorption, temperature-programmed reduction (H₂-TPR) and temperature-programmed desorption (N₂-TPD). The catalytic activities of the studied catalysts for H₂ production via NH₃ decomposition were measured in a fixed-bed micro-reactor. Co catalyst supported on multi-wall carbon nanotubes has shown the highest catalytic activity. The Co particles size was significantly affected by the variation of the post-treatment temperature. The Co particles size in the range of 4.7–64.8 nm can be effectively controlled by varying post-treatment temperature between 230 and 700 °C. The maximum TOF of NH₃ decomposition was registered on cobalt catalyst post-treated at 600 °C.     

Calibration of multiple kinects with little overlap regions

When using multiple Kinects, there must be enough distances among neighboring Kinects to avoid spoiled range data caused by the interference of their infrared speckle patterns. In the arrangement, their overlapped regions are too small to apply existing calibration methods using correspondences between their observations straightforwardly. Therefore, we propose a method to calibrate Kinects without large overlapped regions. In our method, first, we add extra RGB cameras in an environment to compensate overlapped regions. Thanks to them, we can estimate their camera parameters by obtaining correspondences between color images. Next, for accurate calibration, which considers range data as well as color images of Kinects, we optimize the estimated parameters by minimizing both the errors of correspondences between color images and those of range data of planar regions, which exist in a general environment such as walls and floors. Although our method consists of conventional techniques, its combination is optimized to achieve the calibration. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Categorical formulation of mathematical design theories applied to system design process analysis

Given hierarchical system specifications, embodiment and integration processes of subsystems are crucial in designing complex engineered systems. To complement the current mathematical design theories that do not sufficiently support these processes, this study applies general design theory to formulate these processes based on the mathematical structure of design knowledge studied in the literature using category theory. Specifically, the composition of embodiment operations and the relations among subsystems in integration operations on the category of sets and topological spaces are elucidated. Furthermore, the formulation is applied to analysis of a system design process of a production line in model-based systems engineering.     

Experimental analysis of 2D-unsteady temperature field by using Mach-Zehnder interferogram images

A measurement method for an unsteady temperature field by using a Mach-Zehnder interferometer and image processing technique is presented. In this study, the results measured by this method were compared with the calculated results under Reynolds numbers (Re = UL/v) ranging to less than 350 in the steady-state. The unsteady characteristics of the local Nusselt numbers (Nu_x = α_xL/λ) around an elastically vibrating plate were investigated under the conditions that the reduced frequency (N = 1/Ro) ranged from 4.8 to 8.6 and the amplitude of vibration was kept small relative to the plate length. In this study it was clarified that the distributions of the Local Nusselt numbers were observed flutteringly, and that the phase of the time-averaged Nusselt number is delayed compared to the phase of the velocity at the trailing edge. These results indicate that the enhancement of the time-averaged heat transfer coefficient around the vibrating plate depended on the Rossby number. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 88–102, 1996     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996