Enhancement of Defect Production Rates in <Emphasis Type="Italic">n</Emphasis>-Type Silicon by Hydrogen Implantation Near 270 K

Defect production behavior in hydrogen-implanted n-type silicon has been studied by varying the implantation temperature from 88 K to 303 K. Deep-level transient spectroscopy has been used to reveal electron trap spectra for Schottky diodes fabricated at room temperature after implantation. Metastable defects are observed in addition to vacancy- and hydrogen-related defects. It is found that the production rates of these defects are greatly enhanced by hydrogen implantation near 270 K. It is suggested that hydrogen plays an important role in enhancement of defect production rates, since such defect production behavior is not observed in He-implanted samples.     

Diffusion-controlled size-selective chloride ion sensing in the presence of bromide ion using a thin, nanoporous, plasma-polymerized coating on an Ag/AgCl electrode

We have developed a diffusion-controlled size-selective method for sensing chloride ion in the presence of bromide ion, based on a thin, nanoporous, plasma-polymerized coating of hexamethyldisiloxane on an Ag/AgCl electrode. Sub-nanometer-sized pores responsible for a highly cross-linked polymer network in the plasma-polymerized coating allowed diffusion-controlled permeation of chloride ion while blocking the larger bromide ion. An electrode coating of thickness greater than 70 nm enabled chloride detection in the concentration range 1-10 mM in the presence of 0.63 mM bromide ion. Advantages of this approach are: (1) simple design compared with ionophore-based strategies and (2) compatibility with microfabrication and mass production processes.     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.     

A Fuzzy Expert System for Damage Assessment Using Genetic Algorithms and Neural Networks

Abstract: An efficient knowledge-acquisition support method is required for improvement and maintenance of the knowledge base in durability evaluation of an RC bridge deck. Such a method is proposed in this paper to automatically acquire fuzzy production rules. This method makes joint use of genetic algorithms and a neural network. Using a neural network as a subsystem, the evaluation function of genetic algorithms can be provided with the weights of the neural network. Introducing a neural network into genetic algorithms, it is possible to acquire new knowledge so that the method is useful when it is difficult to acquire knowledge in the field.     

Optimal boiler control through real-time monitoring of unburned carbon in fly ash by laser-induced breakdown spectroscopy

A laser-induced breakdown spectroscopy (LIBS) technique has been applied for detection of unburned carbon in fly ash, and an automated LIBS unit has been developed and applied in a 1000-MW pulverized-coal-fired power plant for real-time measurement, specifically of unburned carbon in fly ash. Good agreement was found between measurement results from the LIBS method and those from the conventional method (Japanese Industrial Standard 8815), with a standard deviation of 0.27%. This result confirms that the measurement of unburned carbon in fly ash by use of LIBS is sufficiently accurate for boiler control. Measurements taken by this apparatus were also integrated into a boiler-control system with the objective of achieving optimal and stable combustion. By control of the rotating speed of a mill rotary separator relative to measured unburned-carbon content, it has been demonstrated that boiler control is possible in an optimized manner by use of the value of the unburned-carbon content of fly ash.     

Effect of cooking on the antioxidant properties of coloured peppers

Pepper (Capsicum annum L.) has long been recognized as an excellent source of antioxidants, being rich in ascorbic acid and other phytochemicals. This study was conducted to investigate the effect of different cooking methods on the antioxidant properties of coloured peppers. Six varieties of peppers were subjected to different cooking methods, such as microwave heating, stir-frying and boiling in water, for 5 min individually. The cooked and raw peppers were analyzed for radical-scavenging activity (RSA) and total polyphenol content (TP) using 1,1-diphenyl-2-picrylhydrazyl–high-pressure liquid chromatography (DPPH)–HPLC and Folin-Ciocalteu methods, respectively. The samples were also evaluated for ascorbic acid content (AsA) by HPLC. Total carotenoid content was determined spectrophotometrically. Results suggest that there is no significant (P > 0.05) difference in RSA, TP, AsA and total carotenoid contents between the cooked and raw peppers when processed for 5 min. However, the cooked peppers show marked differences (P < 0.05) in the RSA, TP and AsA when cooked for 5 min in boiling water with further reduction observed after boiling for 30 min. This may be due to the leaching of antioxidant compounds from the pepper into the cooking water during the prolonged exposure to water and heat. Therefore, it is vital to use less water and cooking time and also to consume the water used for boiling so as to obtain the optimum benefits of bioactive compounds present in peppers. It is concluded that microwave heating and stir-frying without using water are more suitable cooking methods for pepper, to ensure the maximum retention of antioxidant molecules.     

Growth and proliferation of bone marrow mesenchymal stem cells affected by type I collagen,fibronectin and bFGF

Bone marrow mesenchymal stem cells (MSCs) can differentiate into a various type cells. It has been identified that MSCs are an attractive cell source for various tissue engineering and play a central role in the repair and regeneration of mesenchymal tissue. Expansion of MSCs in vitro is prerequisite for their applications in tissue engineering. In this study, we evaluated the effects of type I collagen (Col I), fibronectin (Fn) and basic fibroblast growth factor (bFGF) on growth and proliferation of human MSCs (hMSCs) by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphe-nyltetra-zolium bromide (MTT) assay. Our results show that low-dose bFGF (5–20 ng/ml) has a promotion effects for growth and proliferation of hMSCs. The proliferation, however, was back to the level similar to the control one (without bFGF treatment) after exposure to high-dose bFGF (40 ng/ml). Application of Col I, coating on the silicone surface or mixed with medium directly, yielded an obvious decrease in growth and proliferation of hMSCs. Moreover, the inhibitory effects exhibited a dose-dependence manner. On the other hand, Fn coating did not promote the growth and proliferation of hMSCs, and also did not inhibit proliferation, but enhanced the adhesion of hMSCs to silicone surface. These findings indicate that Col I decreases the growth and proliferation of hMSCs and is not suitable for encouraging expansion of hMSCs in vitro. Low-dose bFGF could be preferred as medium supplementation for hMSCs expansion and Fn is a better coating material for hMSCs adhesion.     

An efficient contention resolution algorithm for input queuing atm cross-connect switches

This paper describes an efficient contention resolution algorithm and its distributed implementation for large capacity input queuing cross-connect switches, which will establish virtual paths in future broadband ATM networks. The algorithm dynamically allocates sending time to cells held in input queues when no contention is indicated in the designated output ports. An expression for the mean delay and the cell loss probability for random traffic are derived through an approximate analysis. Input cells are served on a first-come, first-served basis as conventional contention resolution algorithms whose throughput saturates at 58 per cent because of head of line blocking in input queues. The proposed algorithm achieves a maximum throughput of 76 per cent.     

Development of multianode photomultiplier tube

We have developed a multianode photomultiplier tube (MAPMT) which has a sensitive cathode diameter of 36 mm and an anode with 88 segments. The position sensitivity of the tube was studied by using light from a LED and scintillation light from a scintillation-fiber bundle. We observed particle tracks for the first time by using a single photomultiplier tube.