Enhancing the Nucleolytic Resistance and Bioactivity of Functional Nucleic Acids by Diverse Nanostructures through in Situ Polymerization-Induced Self-assembly

Functional nucleic acids (FNAs) are garnering tremendous interest owing to their high modularity and unique bioactivity. Three-dimensional FNAs have been developed to overcome the issues of nuclease degradation and limited cell uptake. We have developed a new facile approach to the synthesis of multiple three-dimensional FNA nanostructures by harnessing photo-polymerization-induced self-assembly. Sgc8 aptamer and CpG oligonucleotide were modified as macro chain-transfer reagents to mediate in situ polymerization and self-assembly. Diverse structures, including micelles, rods, and short worms, afford these two FNAs afford these two FNAs with higher nuclease resistance in serum serum, greater cellular uptake efficiency, and increased bioactivity.     

Quantifying the size‐resolved dynamics of indoor bioaerosol transport and control

Understanding the bioaerosol dynamics of droplets and droplet nuclei emitted during respiratory activities is important for understanding how infectious diseases are transmitted and potentially controlled. To this end, we conducted experiments to quantify the size‐resolved dynamics of indoor bioaerosol transport and control in an unoccupied apartment unit operating under four different HVAC particle filtration conditions. Two model organisms (Escherichia coli K12 and bacteriophage T4) were aerosolized under alternating low and high flow rates to roughly represent constant breathing and periodic coughing. Size‐resolved aerosol sampling and settle plate swabbing were conducted in multiple locations. Samples were analyzed by DNA extraction and quantitative polymerase chain reaction (qPCR). DNA from both organisms was detected during all test conditions in all air samples up to 7 m away from the source, but decreased in magnitude with the distance from the source. A greater fraction of T4 DNA was recovered from the aerosol size fractions smaller than 1 μm than E. coli K12 at all air sampling locations. Higher efficiency HVAC filtration also reduced the amount of DNA recovered in air samples and on settle plates located 3‐7 m from the source.     

Ab-initio study of electronic and elastic properties of Mg(BH4)(NH2) complex hydride

Structural and electronic properties of complex hydride Mg(BH₄)(NH₂), applicable in hydrogen storage, were studied in framework of pseudopotential-density functional theory. This compound shows an indirect band gap of 4.95 eV which is categorized in insulator materials. The calculated total and partial density of states of this compound show that the hydrogen bonding in BH₄ anion is mainly covalent and the hydrogen-hydrogen repulsion is more in anion BH₄ than in anion NH₂. The calculated bulk modulus from Birch-Murnaghan equation of state is in close agreement with that obtained from the elastic constants. The obtained bulk modulus (19.27 GPa) shows this compound is more ductile than binary and ternary hydrides and it does not have a brittle structure. Therefore, it is a good candidate for hydrogenation and dehydrogenation cycles. The stability of the structure in ambient pressure is also declared by calculating the elastic coefficients. However, the existence of elastic anisotropy in the compound demonstrates the less compressibility of it along the c axis than a and b axes. The small amount of Poisson ratio indicates that it is more stable against shear compared to common borohydrides. This point is important for hydride stability in hydrogenation and dehydrogenation cycles.     

Deadlock-free scheduling in flexible manufacturing systems using Petri nets

This paper addresses the deadlock-free scheduling problem in Flexible Manufacturing Systems. An efficient deadlock-free scheduling algorithm was developed, using timed Petri nets, for a class of FMSs called Systems of Sequential Systems with Shared Resources (S 4 R). The algorithm generates a partial reachability graph to find the optimal or near-optimal deadlock-free schedule in terms of the firing sequence of the transitions of the Petri net model. The objective is to minimize the mean flow time (MFT). An efficient truncation technique, based on the siphon concept, has been developed and used to generate the minimum necessary portion of the reachability graph to be searched. It has been shown experimentally that the developed siphon truncation technique enhances the ability to develop deadlock-free schedules of systems with a high number of deadlocks, which cannot be achieved using standard Petri net scheduling approaches. It may be necessary, in some cases, to relax the optimality condition for large FMSs in order to make the search effort reasonable. Hence, a User Control Factor (UCF) was defined and used in the scheduling algorithm. The objective of using the UCF is to achieve an acceptable trade-off between the solution quality and the search effort. Its effect on the MFT and the CPU time has been investigated. Randomly generated examples are used for illustration and comparison. Although the effect of UCF did not affect the mean flow time, it was shown that increasing it reduces the search effort (CPU time) significantly.     

Controlled Creating of Cracks in Concrete for Non-destructive Testing

The non-destructive assessment of cracks in concrete is a common task for which non-destructive evaluation solutions have been published. Primarily, these tests have been carried out on artificial cracks that have been created by using notches instead of natural cracks. This study evaluates a procedure designed to create reproducible and controlled cracks in concrete. The procedure is based on using expanding mortar in a series of blind holes. This is done in combination with carefully aligned reinforcement to guide the direction of the crack development. The depth of the crack is also controlled by reinforcement. Crack depth varies statistically in the range of the maximum aggregate size (16 mm) used for concrete.     

TSTL: the template scripting testing language

International Journal on Software Tools for Technology Transfer - A test harness, in automated test generation, defines the set of valid tests for a system, as well as their correctness properties....     

Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.     

Preparation of novel 2-(2-oxo-2H-chromen-4-yl)-3- arylthiazolidin-4-one derivatives using an efficient ionic liquid catalyst

An eco-friendly procedure for synthesis of 2-(2-oxo-2H-chromen-4-yl)-3-arylthiazolidin-4-one derivatives by three-component reaction of 2-oxo-2H-chromene-4-carbaldehydes, aromatic amines and thioglycolic acid, with tetramethylbutane-1,4-diammonium acetate as a low-cost ionic liquid catalyst under reflux condition is described. The use of an ionic liquid as a catalyst has the advantages of high yields, short reaction time and environmentally friendly reaction media.     

Reductive removal of hexavalent chromium from aqueous solution using sepiolite-stabilized zero-valent iron nanoparticles: Process optimization and kinetic studies

We studied the optimization of hexavalent chromium (Cr(VI)) removal from aqueous solution using the synthesized zero-valent iron nanoparticles stabilized with sepiolite clay (S-ZVIN), under various parameters such as reaction time (min), initial solution pH and concentration of S-ZVIN (g·L^?1) using response surface methodology (RSM). The kinetic study of Cr(VI) was conducted using three types of the most commonly used kinetic models including pseudo zero-order, pseudo first-order, and pseudo second-order models. The rate of reduction reaction showed the best fit with the pseudo first-order kinetic model. The process optimization results revealed a high agreement between the experimental and the predicted data (R²=0.945, Adj-R²=0.890). The results of statistical analyses showed that reaction time was the most impressive factor influencing the efficiency of removal process. The optimum conditions for maximum response (98.15%) were achieved at the initial pH of 4.7, S-ZVIN concentration of 1.3 g·L^?1 and the reaction time of 75 min.