Thermal and electrochemical performance analysis of a proton exchange membrane fuel cell under assembly pressure on gas diffusion layer

In this study, the effect of clamping pressure on the performance of a proton exchange membrane fuel cell (PEMFC) is investigated for three different widths of channel. The deformation of gas diffusion layer (GDL) due to clamping pressure is modeled using a finite element method, and the results are applied as inputs to a CFD model. The CFD analysis is based on finite volume method in non-isothermal condition. Also, a comparison is made between three cases to identify the geometry that has the best performance. The distribution of temperature, current density and mole fraction of oxygen are investigated for the geometry with best performance. The results reveal that by decreasing the width of channel, the performance of PEMFC improves due to increase of flow velocity. Also, it is found that intrusion of GDL into the gas flow channel due to assembly pressure deteriorates the PEMFC performance, while decrease of GDL thickness and GDL porosity have smaller effects. It is shown that assembly pressure has a minor effect on temperature profile in the membrane-catalyst interface at cathode side. Also, assembly pressure has a significant effect on ohmic and concentration losses of PEMFC at high current densities.     

Quality control of global solar radiation using sunshine duration hours

The aim of this study was to develop a new and automatic method for controlling the quality of daily global solar radiation, G_d, using sunshine duration hours. The new method has three levels of tests: first, G_d is compared against daily extraterrestrial radiation that is received on a horizontal surface (0.03×G_od?G_d<G_od); second, G_d should only exceed by a small amount of the daily clear sky irradiation that is observed under highly transparent clear skies (G_d<1.1G_cd); and third, the method uses a series of persistence checks that utilize the relation between daily global solar radiation and relative sunshine duration hours. The method is capable of identifying systematic and non-systematic errors and its ability has been shown in three different climates including semi-arid, coastal humid and very arid climates.     

A novel method for refining of acidic sludge and mixing with vacuum bottom to improve bitumen properties

In this study acidic sludge was refined by a novel method that involves neutralization and extraction of organic compound by a waste solvent. Study on refined sludge indicated that sulfuric acid and major of impurities were removed from sludge. Moreover, resin and asphaltene and accordingly ductility of sludge increased. In continue, different amounts of sludge residue were added to vacuum bottom for bitumen preparation. Test results indicated that sludge residue improved mechanical property and elastic modulus of bitumen. Thermal tests illustrated fine thermal stability of blends at production temperature. Also, aging data described reasonable durability for samples. Consequently, by this approach not only hazardous acidic sludge was eliminated from environment but also it improved mechanical properties of bitumen.     

Comparing the Sensitivity of Spot Test Method and a Novel Computer Vision System for Iron Detecting in Fortificated Flours

Controlling of added iron to fortified flours is very important, and the common method is spot test inaccurate method. In this study, we invented a new method based on a computer vision system. We also compared the accuracy of this method and the spot test with atomic absorption spectroscopy. In new method, ferrous sulfate particles in the samples were oxidized, and some red spots were formed on the surface of samples. The captured images from samples were changed to binary images and analyzed using the Clemex Vision 3.5 software. After processing of image, the number of colored spots and the area of spots were determined. The calibration curves were drawn, and in order to compare the sensitivity of the new method with spot test, 33 samples were selected randomly, and the amounts of added iron were detected using new method, spot test, and atomic absorption. We used t test and linear regression tests with a confidence interval of 95 % to compare the results. Results showed that there was a higher correlation (R ²?=?0.988, p?<?0.001) between new method and atomic absorption method in comparison with spot test (R ²?=?0.501, p?<?0.001). Therefore, spot test and atomic absorption can be replaced by an accurate but inexpensive method.     

Inhibitory Effect of Vibrio neocaledinocus sp. and Pseudoalteromonas piscicida Dual-Species Biofilms on the Corrosion of Carbon Steel

Multi-species biofilms are found in various bacterial habitats and have industrial relevance. These complex bacterial communities have synergetic effects, unlike a single species. Therefore, it is critical to evaluate these complex communities as a whole. Here, the inhibitory effect of single- and dual-species biofilms of Vibrio neocaledinocus sp. and Pseudoalteromonas piscicida for A36 carbon steel corrosion was investigated. The results demonstrated that the synergistic interactions of the monoculture increased the overall biomass production of the dual-species biofilm, but the growth rate was reduced in the presence of the dual-species culture due to a lack of nutrients. Field emission scanning electron microscopy images also confirmed the development of biofilms—they became more homogenized via exposure time in both the mono- and dual-species cultures. The corrosion resistance of A36 carbon steel positively increased because of the dual-species interactions. This reached the highest value after four weeks of exposure. The highest corrosion inhibition efficiency of 99.8% was achieved in the dual-species cultures. Microbial community analysis revealed the high relative abundance of Pseudoalteromonas piscicida during the initial days of exposure, demonstrating the dominant role of this bacterium in the biofilm structure.     

Kinetic Modeling of Methane Hydrate Formation in the Presence of Low‐Dosage Water‐Soluble Ionic Liquids

The kinetic and thermodynamic effects of three typical low‐dosage imidazolium‐based ionic liquids (ILs) on methane hydrate formation and dissociation were investigated, considering the anion nature and subcooling and/or overpressure driving forces. Isochoric hydrate formation and dissociation data were obtained by the modified slow step‐heating method. ILs proved to have a dual effect on both formation and dissociation of methane hydrate including thermodynamic and kinetic inhibition. Kinetic modeling of methane hydrate inhibition by low‐dosage ILs was performed. Kinetic analysis showed that IL inhibitors mainly cause a delay in the nucleation or hydrate growth step. The related inhibition mechanism was resolved regarding the ionic nature and electrostatic interactions of ILs with water molecules. Two binomial exponential kinetic relations were derived and used for simple methane hydrate formation in the presence of ILs as kinetic hydrate inhibitors. The proposed relations can serve for a quick estimation of the nature, extent, strength, and effectiveness of ILs on various gas hydrates.     

Low-cost metal oxide activated carbon prepared and modified by microwave heating method for hydrogen storage

Novel microporous activated carbon (MAC) with high surface area and pore volume has been synthesized by microwave heating. Iron oxide nanoparticles were loaded into MAC by using Fe(NO₃)₃·9H₂O followed by microwave irradiation for up to five minutes. The surface modified microporous activated carbon was characterized by BET, XRD, SEM and thermogravimetric examinations. Adsorption data of H₂ on the unmodified and modified MACs were collected with PCT method for a pressure range up to 120 bar at 303 K. Greater hydrogen adsorption was observed on the carbon adsorbents doped with 1.45 wt% of iron oxide nanoparticle loaded due to the joint properties of hydrogen adsorption on the carbon surface and the spill-over of hydrogen molecules into carbon structures.     

Miners' exposure to radon and its decay products in some Iranian non-uranium underground mines

Measurements of radon, radon decay products and gamma exposure rate in 12 non-uranium underground mines have been carried out in order to estimate the occupational radiation exposure of miners. Continuous measurements of radon using pulse ionisation chambers and scintillation cell techniques were employed for these studies. Progenies of radon were collected on filter paper, and then a three-count procedure was used for the measurement. The equilibrium state between radon and its decay products has been determined. Concentrations of natural radionuclides ((226)Ra, (232)Th and (40)K) in ore and soil samples taken from various locations in each mine have been measured using a Canberra High Purity Germanium detector. Based on these measurements two ranges of dose were evident. Doses ranged from 0.1 to 1.52 mSv y(-1) for nine mines and from 10 to 31 mSv y(-1) for the other three mines. A separate grouping of the mines was recognised from radon concentrations, which varied from 2 Bq m(-3) to 10 kBq m(-3). In three of these mines, working level (WL) concentrations of the order of 36-1771 mWL were determined in different working areas. In all other mines, the concentrations were observed to be <45 mWL.     

Estimates of the occupational exposure to tenorm in the phosphoric acid production plant in Iran

Phosphate rock is used world wide for manufacturing phosphoric acid and several chemical fertilisers. It is known that the phosphate rock contains various concentrations of uranium, thorium, radium and their daughters. The subject of this study is the evaluation of the radiation exposure to workers in the phosphoric acid production plant due to technologically enhanced naturally occurring radioactive materials that can result from the presence of naturally occurring radioactive materials in phosphate ores used in the manufacturing of phosphoric acid. Radiation exposure due to direct gamma radiation, dust inhalation and radon gas has been investigated and external and internal doses of exposed workers have been calculated. Natural radioactivity due to (40)K, (226)Ra and (232)Th have been measured in phosphate rock, phosphogypsum, chemical fertilisers and other samples by gamma spectrometry system with a high-purity germanium. The average concentrations of (226)Ra and (40)K observed in the phosphate rock are 760 and 80 Bq kg(-1), respectively. Annual effective dose from external radiation had a mean value of ～0.673 mSv y(-1). Dust sampling revealed greatest values in the storage area. The annual average effective dose from inhalation of long-lived airborne was 0.113 mSv y(-1). Radon gas concentrations in the processing plant and storage area were found to be of the same value as the background. In this study the estimated annual effective doses to workers were below 1 mSv y(-1).