Mullite Coatings on SiC and C/C–Si–SiC Substrates Characterized by Infrared Spectroscopy

Mullite (3Al₂O₃·2SiO₂) coatings on SiC substrates and SiC precoated carbon/carbon composite (C/C-Si-SiC) substrates were produced by pulsed laser deposition (PLD) using pressed mullite powder targets. The layers can be characterized efficiently by IR reflection spectroscopy in the spectral range between 650 and 5000 cm⁻¹. The deposited coatings turn into mullite upon oxidation in air at temperatures between 1400° and 1600°C. Fabry-Perot interferences indicate a high quality and homogeneity of the mullite coating/SiC substrate interface. Amorphous SiO₂ gradually forms during prolonged heating or at higher temperatures.     

Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties

Immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether) (PPE) and poly(styrene-co-acrylonitrile) (SAN) with a weight composition of 60/40 were compatibilised by polystyrene-block-polybutadiene-block-poly(methyl methacrylate) triblock terpolymers (SBM) using a two-stage melt-processing approach. In order to investigate the influence of the SBM composition on the compatibilisation efficiency, the block lengths of the triblock terpolymers were systematically varied. The resulting morphological features of the blend systems as function of SBM composition and processing parameters are correlated with the resulting thermal and thermo-mechanical properties. In the ideal case, SBM should be located at the interface as PS is miscible with PPE while PMMA is miscible with SAN. The elastomeric middle block as an immiscible component should remain at the interface. This particular morphological arrangement is known as the ‘raspberry morphology’. A detailed TEM analysis of the blend morphologies following initial extrusion-compounding revealed a high compatibilisation efficiency of the SBM types with equal lengths of the end blocks and, furthermore, the desired raspberry morphology was achieved. In contrast, high PS contents in comparison to the other blocks led to a pronounced micelle formation in the PPE phase. Further evaluation of the blend structures following injection-moulding indicated that the morphologies remain relatively stable during this second melt-processing step. A detailed thermal analysis of all blend systems supports the interpretation of the observed morphological features. The fundamental correlation between SBM composition and blend morphology established in this study opens the door for the controlled development of interfacial properties of such compatibilised PPE/SAN blends during melt-processing.     

Bridging the gap between formal semantics and implementation of triple graph grammars

The correctness of model transformations is a crucial element for model-driven engineering of high-quality software. A prerequisite to verify model transformations at the level of the model transformation specification is that an unambiguous formal semantics exists and that the implementation of the model transformation language adheres to this semantics. However, for existing relational model transformation approaches, it is usually not really clear under which constraints particular implementations really conform to the formal semantics. In this paper, we will bridge this gap for the formal semantics of triple graph grammars (TGG) and an existing efficient implementation. While the formal semantics assumes backtracking and ignores non-determinism, practical implementations do not support backtracking, require rule sets that ensure determinism, and include further optimizations. Therefore, we capture how the considered TGG implementation realizes the transformation by means of operational rules, define required criteria, and show conformance to the formal semantics if these criteria are fulfilled. We further outline how static and runtime checks can be employed to guarantee these criteria.     

Ca15(CBN)6(C2)2O- a new cubic structure type containing CBN-anions together with acetylide and oxo anions

Ca₁₅(CBN)₆(C₂)₂O contains CBN⁴⁻ anions as well as C₂⁻ units and isolated O²⁻ anions. The compound is obtained by heating a stoichiometric mixture of CaO, C and BN with an excess of Ca in sealed niobium ampoules to 1270 K. It crystallizes in the space group Ia d with a = 1656.84(9) pm. Preparation, crystal structure, NMR and IR-spectroscopic properties are discussed.     

ExoPranayama: a biofeedback-driven actuated environment for supporting yoga breathing practices

Both breathing and internal self-awareness are an integral part of any yoga practice. We describe and discuss the development of ExoPranayama, an actuated environment that physically manifests users’ breathing in yoga. Through a series of trials with yoga practitioners and expert teachers, we explore its role in the practice of yoga. Our interview results reveal that biofeedback through the environment supported teaching and improved self-awareness, but it impacted group cohesion. Two practical uses of the technology emerged for supporting breath control in yoga: (1) biofeedback can provide new information about users’ current internal states; (2) machine-driven feedback provides users with a future state or goal and leads to improved cohesiveness.     

High-performance MEMS shutter display with metal-oxide thin-film transistors and optimized MEMS element

Active matrix prestressed microelectromechanical shutter displays enable outstanding optical properties as well as robust operating performance. The microelectromechanical systems (MEMS) shutter elements have been optimized for higher light outcoupling efficiency with lower operation voltage and higher pixel density. The MEMS elements have been co-fabricated with self-aligned metal-oxide thin-film transistors (TFTs). Several optimizations were required to integrate MEMS process without hampering the performance of both elements. The optimized display process requires only seven photolithographic masks with ensuring proper compatibility between MEMS shutter and metal-oxide TFT process.     

GOST 34.10—A brief overview of Russia's DSA

GOST 34.10 is Russia's DSA. Like its US counterpart, GOST is an ElGamal-like signature scheme used in Schnorr mode. It is similar to NIST DSA in many aspects. In this paper we will overview GOST 34.10 and discuss the three main differences between the two algorithms, (i) GOST's principal design criterion does not seem to be computational efficiency: the algorithm is 1.6 times slower than the DSA and produces 512-bit signatures. This is mainly due to the usage of the modulus q which is at least 254 bits long. During verification, modular inverses are computed by exponentiation (while the Extended Euclidian algorithm is roughly 100 times faster for this parameter size) and the generation of the public parameters is much more complicated than in the DSA. This choice of the parameters makes GOST 34.10 very secure. (ii) GOST signers do not have to generate modular inverses as the basic signature equation is s = xr + mk (mod q) instead of (mod q). (iii) GOST's hash function (the Russian equivalent of the SHA) is the standard GOST 34.11 which uses the block cipher GOST 28147 (partially classified) as a building block. The hash function will be briefly described. Copyright     

Crease Surfaces: From Theory to Extraction and Application to Diffusion Tensor MRI

Crease surfaces are two-dimensional manifolds along which a scalar field assumes a local maximum (ridge) or a local minimum (valley) in a constrained space. Unlike isosurfaces, they are able to capture extremal structures in the data. Creases have a long tradition in image processing and computer vision, and have recently become a popular tool for visualization. When extracting crease surfaces, degeneracies of the Hessian (i.e., lines along which two eigenvalues are equal) have so far been ignored. We show that these loci, however, have two important consequences for the topology of crease surfaces: First, creases are bounded not only by a side constraint on eigenvalue sign, but also by Hessian degeneracies. Second, crease surfaces are not, in general, orientable. We describe an efficient algorithm for the extraction of crease surfaces which takes these insights into account and demonstrate that it produces more accurate results than previous approaches. Finally, we show that diffusion tensor magnetic resonance imaging (DT-MRI) stream surfaces, which were previously used for the analysis of planar regions in diffusion tensor MRI data, are mathematically ill-defined. As an example application of our method, creases in a measure of planarity are presented as a viable substitute.     

Highly efficient switched‐mode transmitter using a current mode class‐D RF amplifier

This article presents a switched‐mode transmitter architecture using a current mode class‐D (CMCD) amplifier. To achieve high average efficiency for a modulated signal the envelope of the complex baseband signal is transformed into pulses such that the CMCD amplifier is operated either at its peak efficiency or completely switched off. The CMCD amplifier has been designed based on single‐tone active harmonic load‐pull measurements to achieve a power‐added efficiency (PAE) of 61.5% with 25 W output power at 900 MHz using LDMOS FETs. Removing the losses of the demodulation filter and of the amplifier a 10% higher efficiency than in an ideal class‐B amplifier can be obtained for burst‐mode operation with a peak‐to‐average power ratio of 10 dB. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Nonlinear ceramics for tunable microwave devices

The research on materials and systems for tunable microwave devices has gained attraction within the last years. The radio frequency characterization and the component design of tunable microwave components based on dielectric ceramics especially barium-strontium-titanate (BST) are presented in this second part, whereas the basic material properties are discussed in detail in the first part. After a short introduction to the processing technology used for the fabrication of tunable components based on a BST thick film, the relations between microwave properties and material properties as well as the microstructure are presented in detail. The design process for tunable microwave components based on BST thick films is described. Especially the considerations related to micro- and macrostructure and their connection are highlighted. The paper closes with two different application examples: a reconfigurable array antenna for satellite communication and varactors for high power applications.