Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

Abrasion-Resistant and Enhanced Super-Slippery Flush Toilets Fabricated by a Selective Laser Sintering 3D Printing Technology

Flush toilets waste a significant amount of water every day due to the unavoidable adhesions between human waste and the toilet surfaces. Super-slippery surfaces can repel complex fluids and various viscoelastic solids, however, are easily broken by mechanical abrasions. Herein, the fabrication of an abrasion-resistant super-slippery flush toilet (ARSFT) is reported using a selective laser sintering 3D printing technology. Unlike traditional super-slippery surfaces with limited thicknesses which can be easily worn away, the powder-sintered strategy endows the ARSFT not only with a self-supporting 3D complex shape but also with a porous structure that can accommodate considerable lubricants for an abrasion-resistant super-slippery property. As a result, the as-prepared ARSFT remains clean after contacting with various liquids such as milk, yogurt, highly sticky honey, and starch gel mixed congee, demonstrating excellent repellence to complex fluids. Besides liquids, the ARSFT exhibits a high resistance to sticky synthetic feces. Notably, even after being abraded to 1,000 cycles of abrasion using sandpaper, the ARSFT maintains its record-breaking super-slippery capability. The concept of the 3D-printed object with a superior abrasion-resistant slippery ability will improve the development of super-slippery materials and further save water consumption in the human society.     

Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

Control of 5',5'-dinucleoside triphosphate catabolism by APH1, a Saccharomyces cerevisiae analog of human FHIT

The putative human tumor suppressor gene FHIT (fragile histidine triad) (M. Ohta et al., Cell 84:587-597, 1996) encodes a protein behaving in vitro as a dinucleoside 5',5"'-P1,P3-triphosphate (Ap3A) hydrolase. In this report, we show that the Saccharomyces cerevisiae APH1 gene product, which resembles human Fhit protein, also hydrolyzes dinucleoside 5',5'-polyphosphates, with Ap3A being the preferred substrate. Accordingly, disruption of the APH1 gene produced viable S. cerevisiae cells containing reduced Ap3A-hydrolyzing activity and a 30-fold-elevated Ap3N concentration.     

Escherichia coli prlC gene encodes a trypsin-like proteinase regulating the cell cycle

BACKGROUND AND PURPOSE: Mood disorders are common after stroke and may impede physical, functional, and cognitive recovery, making early identification and treatment of potential importance. We aimed to compare the accuracy of the General Health Questionnaire (GHQ-30) and the Hospital Anxiety and Depression (HAD) Scale in detecting psychiatric morbidity after stroke and to determine the most suitable cutoff points for different purposes. METHODS: One hundred five hospital-referred stroke patients completed both the GHQ-30 and HAD Scale 6 months after onset before a blinded psychiatric assessment in which the Schedule for Affective Disorders and Schizophrenia with some supplementary questions was used to determine a DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) diagnosis. Measures were compared in terms of sensitivity, specificity, and receiver operating characteristic curves. RESULTS: No significant differences were found between the GHQ-30 and the HAD Scale in identifying those patients with any DSM-IV diagnosis (P=0.95), grouped depression (P=0.56), or anxiety (P=0.25) disorders. The previously recommended cutoff points for identifying "cases" for the GHQ (4/5) and for the HAD Scale (8/9 and 11/12) were found to be suboptimal in this population. CONCLUSIONS: The GHQ-30 and HAD scale exhibited similar levels of sensitivity and specificity. Data are presented, taking into account the "cost" of false-positives and negatives, to allow a choice of cutoff points suitable for differing situations.     

湖北省城镇垃圾处理政策研究

在对垃圾处理现状进行系统的调查研究的基础上,作者提出了湖北省城镇垃圾处理的合理改革与相应措施．