Antioxidant properties and composition of Majorana syriaca extracts

Majorana syriaca is an important food‐flavouring ingredient in the Middle Eastern culture known commonly as Za'atar. The components of the plant were extracted in a Soxhlet apparatus sequentially with solvents of increasing polarity, specifically with petroleum ether (P), diethyl ether (D), ethyl acetate (EAc), and ethanol (E). The activity of the extracts to scavenge the 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH^?) followed the order D > E > EAc > P. Moreover, the antioxidant activity in corn oil at concentrations of 200, 500 and 1000 ppm was monitored through peroxide value and conjugated hydroperoxide measurements and revealed that D and E extracts resulted in the highest protection followed by EAc and P extracts. Increasing the concentration from 200 to 500 ppm depressed peroxide formation, while a further increase had no effect. The main components of the P extract according to GS‐MS analysis were thymol (42.89%) and carvacrol (42.75%). The remaining extracts comprise flavonoids and phenolic acids that provide the antiradical and antioxidant activity.     

Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines

Water‐insoluble polyaspartyl polymers were synthesized by using water as medium instead of organic medium. Taking Ca²⁺ as a reference, the binding of several heavy‐metal ions, including Pb²⁺, Cd²⁺, Hg²⁺, Cr³⁺, Cu²⁺, and Mn²⁺, by polyaspartyl polymers was studied. The experimental results revealed that polyaspartate is an excellent binding agent for the investigated heavy‐metal ions. These cation ions were bound to polyaspartate polymer by the same mechanism as Pb²⁺, which can be explained by ion exchange model. Since polyaspartate has a protein‐resembling structure that is sensitive to trace heavy metal, it was used to remove some trace heavy‐metal elements in Chinese herbal medicines. It was found that polyaspartate material was an effective agent for the removal of Pb²⁺, Cd²⁺, and Hg²⁺ ions from glycyrrhizin, angelica, and gynostemma pentaphyllum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

2,4-二氯-3-乙基-6-硝基苯酚的合成

介绍了以对硝基乙苯为原料 ,经三氯异氰脲酸氯化反应、碱解反应和酸化反应 ,高纯度 (大于 99% )、较高收率和较低成本地合成了目的产物的方法。该方法具有氯化试剂的投料量易于控制和反应控制简便等优点     

三（β－氯乙基）磷酸酯的合成

以三氯氧磷和环氧乙烷为原料，在三组份催化剂（ＪＣ－１）的催化下合成三（β－氯乙基）磷酸酯，产品的纯度和收率都高。探讨了影响产率的几个因素，工艺简便，易于工业化。     

油价临界点理论、方法及应用初探

提出油价临界点概念,解决如何在波动油价下,选择具有一定规模的石油项目.通过油价临界点的应用,石油公司能够准确判断石油项目的投资机会,科学调整石油项目的经营规模,合理把握国际油价波动的影响,为提高项目抗风险能力提供科学依据.     

RTM二维径向流动模型的理论概况及研究

综述了牛顿流体在放置了各向同性和各向异性预制件的RTM平板模具中二维径向恒流和恒压渗流的流动模型.对各个模型的可测量物理量之间的关系通过求解其解析解进行了必要的拓展补充推导和研究分析,对传统的二维解析方程进行了拓展和改进,提供了在不透明模具中测定渗透率的方法.即在恒流条件下利用压力传感器和恒流泵测定预制件的二维渗透率;或者在恒压条件下利用数字流量计和压力表测得二维渗透率.这些解析解的关系式也可用于实验预估模具中的压力分布及充模时间等.     

Effect of backwashing on activated carbon adsorption using plug flow pore surface diffusion model

A fixed bed is gradually exhausted from top to bottom without backwashing; however, backwashing can rearrange the concentration gradient in the bed. After backwashing, saturated particles which are located at the top of the bed are homogeneously distributed in the bed. The used model to predict adsorption and backwashing effect of organic component is the plug flow pore surface diffusion model (PFPSDM). A sensitivity analysis was performed to determine which parameters have the greatest impact on the model results for components which can represent various organics. In addition, the effects of backwashing were examined by rearranging concentration gradient. For single component sensitivity analysis, the molecular weight was an important parameter. The breakthrough of the smaller molecular weight component was impacted more by backwashing. The SPDFR showed a significant impact on the breakthrough pattern. When surface diffusion was the dominant mechanism, high SPDFR, the breakthrough profile was sharper than when pore diffusion was dominant, low SPDFR. The adsorbability was an important parameter in determining the breakthrough pattern. As expected, the strongly adsorbable component showed the later breakthrough. Backwashing yielded earlier breakthrough for all single components and multi-components examined.     

Synthesis of chaoite-like macrotubes at low temperature and ambient pressure

Chaoite-like carbon was prepared by quenching the pyrolysate of acetylene gas at 873 K and ambient pressure. Its morphology is carbon macrotubes (CMTs) with 20–60 μm in diameter and up to 8 mm in length. Microstructure analysis revealed that sp-bonded carbon (SPBC) chains in CMTs are kinked and the crystal orientation is anisotropic along the length and circumference directions of CMTs. A SPBC belt scrolling model was proposed for explaining the formation process of CMTs.     

3-碘代-2-炔丙基丁基氨基甲酸酯的合成

介绍了一种水相合成杀菌剂3-碘代-2-炔丙基丁基氨基甲酸酯的方法:以2-炔丙基-丁基氨基甲酸酯、碘为主要原料,水为溶剂,次氯酸钠为氧化剂进行反应,试验了温度、原料配比、时间等反应条件,得出了最佳工艺条件,所得产物含量≥98.5%,收率为90%～92%(以碘计)。     

金属氧化物对金属光泽釉呈色的影响

本文采用佛山地区通用原料，通过正交实验，得出了金属光泽釉的最佳组成。实验发现MnO2是发色主要氧化物；使色差减小的氧化物可同时增加光泽度。与以前金属釉配方相比，所需铅的含量大为降低。