H9000 V4.0计算机监控系统技术特点概要

为了满足三峡右岸电站的应用需要,在H9000 V3.0计算机监控系统的基础上研制开发了H9000 V4.0系统,改进和完善了原系统已有功能,开发了新功能,进一步提高了系统的性能指标和可靠性指标。文中主要介绍H9000 V4.0系统的设计原则,以及数据采集、人机联系、报表定制、Web信息发布、历史数据管理等主要新功能。     

Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

大花水水电站首部枢纽布置设计

大花水水电站首部枢纽由碾压混凝土拦河大坝、泄洪建筑物和电站进水口组成。大坝采用河床拱坝 左岸重力坝的组合坝型,拱坝最大坝高134.50 m,重力坝最大坝高73 m。泄洪建筑物布置在拱坝坝身,为3个表孔 2个中孔的布置型形式。电站进水口布置于左岸重力坝坝身。首部枢纽布置紧凑,而且充分考虑了坝址区河谷狭窄、地形地貌及、存在的地质缺陷,以及泄洪流量大等工程特点。本文重点介绍首部枢纽的布置设计比选过程。     

Effects of home preparation on pesticide residues in cabbage

Experiment was carried out to evaluate the pesticides (chlorpyrifos, p,p-DDT, cypermethrin, chlorothalonil) residue levels in cabbage in the process of home preparation by washing with different concentrations of acetic acid and sodium chlorine, and tap water, preserving in refrigerator, and stir-frying for different time. Results showed that washing by tap water and/or detergent solution for cooking are necessary to decrease the concentration of pesticide residues in cabbage. Washing with acetic acid solutions (at 10% concentration for 20 min) caused 79.8%, 65.8%, 74.0% and 75.0% loss of the above pesticides, respectively. Washing with NaCl solutions (at 10% concentration for 20 min) produced 67.2%, 65.0%, 73.3% and 74.1% loss, respectively, and washing by tap water (for 20 min) were 17.6%, 17.1%, 19.1% and 15.2% loss, respectively. The reductions due to the refrigeration (for 48 h) were 3.4%, 2.6%, 3.1% and 3.6%, respectively, and those due to the stir-frying (for 5 min) were 86.6%, 67.5%, 84.7% and 84.8%, respectively. The data indicated that washing by detergent solutions and stir-frying of cabbage are the most effective home preparations for the elimination of pesticide residues.     

基于分形理论的供应链管理模型分析

为了克服日益复杂的供应链问题,在分形理论的基础上介绍了分形供应链的概念和特点,认为分形供应链所具有的自相似、自组织、自优化等特点可以很好地提高供应链的灵活性,增强适应环境的能力.在此基础上进一步研究了分形供应链的结构模型和运作模型,探讨了其现实意义.     

期货市场促进“铜冠”牌阴极铜创国际品牌

文章介绍了期货交易所由于其特殊的机制,而对其注册上市产品的质量提高有显著的促进作用,同时介绍了“铜冠”牌阴极铜在LME注册成功,取得进入国际市场通行证中的一些情况。     

阳泉市煤矿采空区地质因素对公路的破坏

介绍了阳泉市煤矿采空区对公路建设所造成的危害，对其上覆岩层变形破坏的地质因素及其破坏机理作了分析，指出应该采取各种措施减少对公路的破坏。     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。