过敏原肌质钙结合蛋白在毕赤酵母中的表达、优化及免疫反应性研究

目的 探究天然肌质钙结合蛋白(sarcoplasmic calcium binding protein, SCP)的可替代物,为蟹类过敏原的检测提供基础材料,本研究首次利用毕赤酵母(Pichia pastoris, P. pastoris)高效表达表达三疣梭子蟹(Portunus trituberculatus)重要过敏原SCP,并检验其免疫反应性。方法 根据毕赤酵母的密码子偏好性优化SCP基因并构建重组质粒。将其热激转化至P. pastoris GS115菌株后经遗传霉素(Geneticin, G418)筛选获得阳性高拷贝子。最后通过甲醇诱导表达重组SCP并结合免疫印记(Western blotting, WB)和间接酶联免疫吸附实验(enzyme-linked immunosorbent assay, ELISA)验证其免疫反应性。结果 SCP在P. pastoris GS115中实现了可溶性高效表达,其表观分子量约为28 kDa。在摇瓶水平下,最佳诱导条件为pH为6.0、每24 h添加1.0%(v/v)甲醇,于28℃发酵144 h,在此条件下,纯度为91.6%的SCP产量可达15 mg/L。WB和间接ELISA结果表明,重组SCP具有IgG结合能力。结论 毕赤酵母表达系统可以得到纯度较高且免疫反应性良好的重组SCP。本研究为SCP的理化研究及产业化应用奠定了基础,并有望促进特异性甲壳类过敏原检测的发展。     

佛手凉果加工过程中功能性成分与抗氧化性分析

佛手凉果是具有功能特性的岭南特色凉果品种,探究佛手凉果制作过程中功能性成分及其体外抗氧化活性变化规律,可为佛手凉果产业工艺优化与改良提供依据。结果表明,加工提高了佛手中总酸、多糖、黄酮和膳食纤维含量,导致多酚含量下降。制作过程中,1,1－二苯基－2－三硝基苯(DPPH)自由基、2,20 -联氮- 2 -三硝基苯肼(ABTS)自由基清除能力和铁离子还原抗氧化能力(Ferric Reducing Antioxidant Power, FRAP)呈现先下降后上升的趋势,效果分别是新鲜佛手的1.35倍、1.57倍和2.16倍。总黄酮与FRAP之间呈现极显著相关性(P＜0.01);与DPPH、ABTS呈显著相关性(P＜0.05);有机酸、总多糖分别与ABTS和FRAP之间相关性(P＜0.05)。为此,在佛手凉果的制作过程中,糖制和干燥工艺对功能性成分的转化与浓缩起关键作用,可作为工艺优化的重点。     

Metal Ions versus Protons: Tracking of Charge-Carrier Insertion into a Cathode Oxide in Aqueous Rechargeable Batteries

Protons in aqueous electrolytes can perform as an additional type of charge carrier for insertion/extraction in addition to the primary carrier cations in aqueous rechargeable batteries. Despite many diverse claims regarding the effect of protons, mutually conflicting experimental results and their interpretations without direct evidence have been reported over the last decade. Systematic examinations and analyses are thus imperative to clarify the conditions of proton insertion in aqueous rechargeable batteries. Utilizing V₂O₅ as a model cathode and beaker-type cells with a sufficient amount of ZnSO₄ aqueous electrolytes in this work, it is demonstrated that protons are inserted into the cathode prior to Zn-ions in low-pH conditions (pH ≤ 3.0). In stark contrast, the influence of protons on the discharge voltage and capacity is insignificant, when either the pH becomes higher (pH ≥ 4.0) or the electrolyte volume is considerably low in coin-type cells. Similar behavior of pH-dependent proton insertion is also verified in Na–, Mg–, and Al-ion electrolytes. Providing a resolution to the controversy regarding proton insertion, the present study emphasizes that the influence of protons substantially varies depending on the pH and relative volume of electrolytes in aqueous batteries.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Optimizing Financial Engineering Time Indicator Using Bionics Computation Algorithm and Neural Network Deep Learning

Computational Economics - The present work aims to optimize the time index of financial engineering to improve the efficiency of financial decision-making. A Back Propagation Neural Network (BPNN)...     

热处理非晶态Ni-P合金镀层的晶化过程

运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态NiP合金镀层在20℃/min加热速率下的热效应和质量变化。在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征。结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好。     

小河嘴水电站增效扩容改造电气设备分析

小河嘴水电站已运行四十多年,设备老化,故障多,自动化水平低,对该站进行增效扩容改造是必要的,而且也是可行的。     

基于水印和密码的数字版权管理模型的研究

在分析了数字版权研究现状和功能框架的基础上,设计了基于多重数字水印和密码的版权管理模型;该模型采用数字内容和许可证各自单独封装、独立分发的方式,使得只有购买了许可证的特定用户才能使用数字内容,实现了水印作品的许可交易;另外,内容服务器采用的对数字作品加载两次水印,对数字内容部分签名加密,未加密部分签名的方案,在有效保证数字内容安全传输的基础上又减少了计算量和存储量;分析表明该模型有显著的优点和很好的安全性。     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.