静高压作用下纯铝凝固过程温度场的数值模拟

采用数值模拟的方法,研究了纯铝在静高压作用下凝固过程温度场的变化情况。首先建立了温度场的数学模型,根据压力与金属熔点的关系,将压力作用到凝固过程的温度场上。模拟结果表明:压力越大,纯Al开始凝固的时间越早;在凝固过程中,压力越大,对应的温度变化速度越快。     

中铝河南分公司矿山公司可持续发展三步走战略

中铝河南分公司是个资源性企业．矿山公司的可持续发展有赖于铝土矿的基础性支撑．关键是解决好铝土矿资源的可持续开发利用问题。本文提出了资源调研、勘查、开发三步走的战略．并制定了每一步的实施方案和具体目标。     

层流等离子体射流铝合金表面熔覆SiCp/Al-Si涂层的磨损过程

采用层流等离子体炬作为加热热源，在ZL104铝硅合金表面制备镍包SiCp／Al-Si复合熔覆层。磨损过程中，该熔覆层中的SiCp颗粒微凸体对磨轮的切削产生的切屑，在熔覆层表面形成机械混合层(MML)，此机械混合层硬度较高，耐磨性好，使熔覆层在磨损过程中经历了较长距离的磨损孕育阶段，从而改变了铝合金的磨损过程，延缓了中等磨损向严重磨损的转变。     

复相Al2O3/SiCw陶瓷与不锈钢钎焊接头的界面反应和反应产物

采用氩气保护下活性金属钎焊法对碳化硅晶须增韧氧化铝陶瓷（Al2O3/SiCw）与不锈钢（1Cr18Ni9Ti)进行了钎焊，所用钎料为Ag-Cu-Ti3活性钎料，通过X－射线衍射仪（XRD）对界面的反应产物进行了物相分析，并用能谱仪（EDAX）分析了界面元素组成，结果表明，钎焊接头界面的反应十分复杂，反应产物多种多样，主要有TiO,Ti2O,TiC,Fe2Ti4O,Ni3Ti,AlTi等物质，界面反应层按Al2O3 SiC/TiO AlTi TiC/TiO2 Fe2Ti4O/Ag-Cu的规律过渡。     

Ag-Pd-5Ru-Gd四元系部分相图的700℃等温截面

在Ag Pd Gd ,Ag Pd Ru ,Ag Ru Gd和Pd Ru Gd三元系合金相图的基础上 ,采用X射线衍射 ,差热分析、扫描电镜和显微金相分析等方法研究了Ag Pd Ru Gd(x(Ru) =5 % ,x(Gd) <2 5 % )四元系相图的 70 0℃等温截面。结果表明 :该截面上包含有 2个单相区 ,即Pd(Ag)和Pd3 Gd ;4个两相区 ,即Pd(Ag) (Ru) ,Pd(Ag) Pd3 Gd ,(Ru) Ag51Gd14 ,(Ru) Pd3 Gd ;3个三相区 ,即Pd(Ag) Pd3 Gd (Ru) ,Pd(Ag) Ag51Gd14 (Ru) ,Pd3 Gd Ag51Gd14 (Ru) ;1个四相区 ,即Pd(Ag) Pd3 Gd Ag51Gd14 (Ru)。未发现新的四元中间相     

小直径钢管内孔等离子弧焊接新方法

所研制的内孔等离子弧焊枪,可以得到与焊枪轴线成任意角度的等离子弧。它为设计制造小型等离子弧焊枪提供了一条新的途径。作者(?)使用该焊枪对内径大于12mm 的管子,成功地进行了内孔对接焊和内孔角接焊.焊接接头质量良好.内孔等离子弧焊接具有钨极寿命长、氩气耗量少等优点,是内孔焊的一种更经济的新方法。     

两相区热处理对TC21钛合金显微结构的影响

采用金相显微镜和扫描电镜等手段，研究了固溶、固溶时效等热处理工艺对TC21钛合金显微组织的影响，确定了两相区热处理得到的显微组织，采用透射电镜、X射线衍射方法研究了TC21钛合金在两相区热处理的相组成。同时探讨了固溶温度、固溶时间、冷却方式以及时效处理对这种合金显微组织和相结构的作用。结果表明：在两相区进行热处理，均得到双态组织；相组成主要是α相、β相，并在TC21合金中发现含有少量金属化合物，如α2-Ti3Al相、B2相、Zr3Al、Si2Mo等；固溶温度影响了初生α相的体积分数和晶粒尺寸：固溶时间达到一定程度后，延长保温时间对显微组织没有明显影响；冷却速度影响声转变基体组织；时效也对β转变基体组织和次生α相有影响。     

Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process

In this paper, in situ synthesized TiC particles reinforced Fe-based surface composite coatings by multi-pass overlapping gas tungsten arc welding (GTAW) melting process employing a proper amount of graphite and ferrotitanium (FeTi) on AISI 1020 steel substrate was produced. The microstructure and wear properties of the composite coatings were investigated by means of an electron microprobe microanalysis (EPMA), X-ray diffractometer and wear tester. The results showed that the multi-pass overlapping GTAW melting surface composite coatings can be obtained under suitable welding parameters, and no crack and porosity are found in the tracks. The X-ray and EPMA results confirm that TiC particles can be formed via reaction of FeTi and graphite during multi-pass overlapping GTAW melting process. TiC particles present cubic and dendrite shape in the non-overlapping zone. It is found that there occurred TiC particles coarsening at the overlap regions, which can lead to detrimental effects on the hardness and wear performance. Composite coatings give a high hardness and excellent wear resistance; and the wear friction coefficient of the coating is less than that of the 1020 steel. As a result, multi-pass overlapping GTAW melting process can be used effectively for producing surface composite coatings with a pre-placed powder to improve wear resistance of the AISI 1020 steel.     

Behavior of residual carbon in Sm(Co, Fe, Cu, Zr)z permanent magnets

When sintered Sm(Co, Fe, Cu, Zr)_z permanent magnets are prepared by metal injection molding, some organic binders are added in alloy powder, which leads to much residual carbon in the magnets. The residual carbon decreases magnetic properties and destroys the microstructure of the magnets. In this paper, the behavior of carbon in Sm(Co, Fe, Cu, Zr)_z permanent magnets has been studied. The results indicate that Sm(Co, Fe, Cu, Zr)_z magnets can keep excellent magnetic properties when the carbon content is below 0.1 wt.%: Br ≥ 10 kGs, H_cj ≥ 22 kOe, BH_max ≥ 25 MGOe. When the carbon content is above 0.1 wt.%, Br, H_cj and BH_max decrease with increasing carbon content evidently. Carbon consumes Zr content and forms ZrC, which reduces the volume fraction of the lamella and Sm(Co, Cu)₅ phases. Thus, the cell size increases and the cellular microstructure deteriorates. When the carbon content reaches 0.43 wt.%, there is not enough Sm(Co, Cu)₅ phase to form a uniform cellular microstructure. Br, H_cj and BH_max are approximate to zero. Since carbon has little influence on the content of Sm₂(Co, Fe)₁₇ phase, Ms can keep a high value (≥100 emu/g). ZrC has high melting point (3420 °C) and acts as dispersion particle in the magnets, which prevents the grains of SEM structure growing and reduces the liquid content of green compacts during sintering. Therefore, the density of the magnets decreases.     

显微组织对Ti-6Al-4V ELI合金疲劳裂纹扩展速率的影响

研究了Ti-6Al-4V ELI合金板材的显微组织对疲劳裂纹扩展速率的影响。用金相显微镜对不同热处理制度下该合金α和β转变组织的变化进行了观察分析。采用MTS-810低周疲劳试验机测试合金的裂纹扩展速率。通过Origin 6.0软件对数据进行处理并绘制裂纹扩展速率（△a／△N）与应力强度因子幅△K的关系曲线。结果表明：在Pairs区范围内，疲劳裂纹扩展速率对双态组织中初生α相含量的多少不敏感，而在近门槛区和快速扩展区，裂纹扩展速率对组织比较敏感；在本实验研究的条件下，细针编织状魏氏组织的da／dN〈平直状片层组织的da／dN〈双态组织的da／dN。