Modulators of Macrophage Polarization Influence Healing of the Infarcted Myocardium

To diminish heart failure development after acute myocardial infarction (AMI), several preclinical studies have focused on influencing the inflammatory processes in the healing response post-AMI. The initial purpose of this healing response is to clear cell debris of the injured cardiac tissue and to eventually resolve inflammation and support scar tissue formation. This is a well-balanced reaction. However, excess inflammation can lead to infarct expansion, adverse ventricular remodeling and thereby propagate heart failure development. Different macrophage subtypes are centrally involved in both the promotion and resolution phase of inflammation. Modulation of macrophage subset polarization has been described to greatly affect the quality and outcome of healing after AMI. Therefore, it is of great interest to reveal the process of macrophage polarization to support the development of therapeutic targets. The current review summarizes (pre)clinical studies that demonstrate essential molecules involved in macrophage polarization that can be modulated and influence cardiac healing after AMI.     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Nutrient balance of shifting cultivation by burning or mulching in the Eastern Amazon – evidence for subsoil nutrient accumulation

For over a hundred years shifting cultivation with slash-and-burn land preparation has been the predominant type of land use by smallholders in the Bragantina region of the Brazilian Eastern Amazon. This study contrasts the nutrient balance of slash-and-burn agriculture with a fire-free cultivation. Therefore, one half of a 3.5-year-old (28.7 t DM ha^–1) and a 7-year-old woody fallow vegetation (46.5 t DM ha^–1) was burnt and the other half mulched, leaving the biomass as a surface residue. Subsequently, a sequence of maize, beans and cassava was cropped for 1.5 year. Burning the 3.5- and 7-year-old fallow removed 97 and 94% of the C, 98 and 96% of the N, 90 and 63% of the P-stocks, and between 45 and 70% of the cations K, Mg and Ca of the aboveground biomass by volatilization or ash-particle transfer. These losses were avoided with the slash-and-mulch land preparation. Mulching did not increase the losses of nutrients by leaching, despite the high amount of rapidly decomposing surface mulch. Also the length of preceding fallow had no significant influence on leaching losses. At a depth of 3 m, leached nutrients were quantitatively negligible in both treatments. Comparing the nutrient fluxes at soil depths of 0.9 m, 1.8 m and 3 m, the amounts of all mobile nutrients, and also of chloride and sodium were markedly reduced during percolation and must have been retained. It is likely that nutrient retention in the subsoil layer is only temporary, emphasizing the need for a rapid re-establishment of the naturally deep-rooting secondary vegetation after abandonment of sites to enable uptake of these nutrients. The overall nutrient balance was highly negative for slash-and-burn. 291 and 403 kg N ha^–1, 21 and 18 kg P ha^–1, and 70 and 132 kg K ha^–1 were removed from the burnt plots with a preceding fallow of 3.5 and 7 years, respectively. A reduced fallow period (3.5 years), which is a common trend in the region, resulted in a higher mean annual rate of nutrient loss averaged over the duration of the cycle than a fallow period of 7 years. Eliminating the burning losses by mulching brought the agricultural system back to an equilibrated or even slightly positive nutrient balance, even after a reduced fallow period. Thus, slash-and-mulch is a viable alternative to maintain agricultural productivity and ecosystem functioning.     

Adhesive based on micellar lupin protein isolate exhibiting oxygen barrier properties

In order to minimize the utilization of non‐renewable fossil resources, novel polymer sources for food packaging are being investigated. Micellar Lupin Protein (MLP), produced by dilution precipitation has great potential as functional laminating adhesive due to its high adhesion‐ and oxygen‐barrier properties. Formulations of MLP are used as laminating adhesive between high density‐polyethylene foil and paper as well as coating for poly(ethylene terephthalate) foil. The application of glycerol, sorbitol and combinations thereof as plasticizers are being investigated. Adhesive behavior as well as oxygen‐ and water vapor barrier properties were tested. The addition of both plasticizers enabled the preparation of processable coatings showing coherent and homogeneous morphology with improved adhesive behavior and oxygen barrier. When using sorbitol oxygen permeation coefficients of 0.93 cm³ (STP) 100 µm m^?2 d^?1 bar^?1 were achieved. The laminates containing only sorbitol provided adhesion properties comparable to standard polyurethane laminates with cohesion failure in 100% of the by T‐Peel‐Test examined cases. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46383.     

Characterization of C–S–H and C–A–S–H phases by electron microscopy imaging,diffraction, and energy dispersive X‐ray spectroscopy

Improving concrete sustainability by increasing durability requires a detailed knowledge about microstructural properties. Due to the nanoscale nature of hydrate phases that determine concrete properties, microstructural characterization remains a challenge. Analytical electron microscopy offers promising techniques to characterize cement hydrates. In this study, electron microscopy imaging, diffraction, and energy dispersive X‐ray spectroscopic information are combined in order to compare the structural properties of calcium silicate hydrate (C–S–H) and calcium aluminum silicate hydrate (C–A–S–H) phases. Results are shown for 28 days hydrated C–(A)–S–H of portland cement and cement containing ground granulated blast‐furnace slag (GGFBS). Electron diffraction patterns of single fibrous C–S–H and foil‐like C–A–S–H phases reveal a nanocrystalline structure. Also, it is shown by electron diffraction pattern that the crystal structures of C–S–H and C–A–S–H phases are similar. It is confirmed that the crystal structure of 14 Å tobermorite serves as good base for the structure of C–S–H. The electron diffraction patterns of fibrous C–S–H show streaks which indicate stacking faults, proofing that polymerization of silicate chains in C–S–H is limited. Here, we demonstrate for the first time that the dreierketten silicate chains contained in the C–S–H structure are oriented in parallel to the long axis of C–S–H fibers. This finding should be implemented in modeling of crystal growth of C–S–H.     

Removal of heavy metals from wastewater using magnetic nanocomposites: Analysis of the experimental conditions

This contribution provides insight on the elimination of heavy metals from water resources using magnetic separation. Nanocomposites based on magnetite and chitosan were prepared. An exhaustive characterization of the magnetic adsorbents was developed. Adsorption assays were performed in batch using Cu, Zn, Cd, and Cr as model heavy metals. The efficiency of magnetic adsorbents followed the order: Cu > Cd > Zn > Cr, with maximum values of 188, 159, 72, and 46 mg of Me/g of nanocomposite, respectively. Kinetics and mechanistic issues were studied. The magnetic materials were efficient for five to eight cycles using Cu(II),Cd(II), and Cr(VI).     

Sintering Behavior of Nanocrystalline Zirconia Doped with Alumina Prepared by Chemical Vapor Synthesis

Powders of nanocrystalline zirconia doped with 3–30 mol% alumina have been synthesized using chemical vapor synthesis (CVS). Dense or mesoporous ceramics of small and narrowly distributed grain and pore sizes in the nanometer range are obtained via pressureless vacuum sintering. The microstructural development of the doped samples is strongly dependent on the alumina content. Sintering of zirconia samples with 3 and 5 mol% alumina at temperatures of 1000°C for 1 h results in fully dense, transparent ceramics with grain sizes of 40–45 nm and homogeneous microstructures.     

The on-line texture analysis of steel strips

A new on-line texture-analyzing system and its application to nondestructive r value determination is discussed. In addition to providing a brief theoretical background and describing the instrumental set-up, the article presents off-line measurements with this equipment and demonstrates the high accuracy of the determined r-values. A special feature of the unit is the possibility to simultaneously measure the most important r values—r₀, r₄₅, r₉₀, and r_m.     

Inhibitors of inducible NO synthase expression: total synthesis of (S)-curvularin and its ring homologues

(S)-Curvularin and its 13-, 14-, and 16-membered lactone homologues were synthesized through a uniform strategy in which a Kochi oxidative decarboxylation and ring-closing metathesis reactions constitute the key processes. In the evaluation of the anti-inflammatory effects of the synthesized compounds in assays using cells stably transfected with a human iNOS promoter-luciferase reporter gene construct, the 14- and 16-membered homologues showed a slightly higher inhibitory effect towards iNOS promoter activity than curvularin itself. However, the larger ring homologues also exhibited higher cytotoxicity, manifest in downregulated eNOS promoter activity. In contrast, the di-O-acetyl and 4-chloro derivatives of (S)-curvularin showed higher inhibitory efficiency towards induction of the iNOS promoter and less negative effect on eNOS promoter activity than curvularin.     

Crystallization of HMX-Particles by Using the Gas Anti-Solvent-Process

A ternary system consisting of cylcotetramethylene tetranitramine (octogen, HMX) as the solute, acetone respectively γ-butyrolactone as solvents and carbon dioxide as the anti-solvent was used to investigate the formation of fine particles with the GAS-process as well as the influence of the solvents upon the particle morphology under the same operating conditions. The precipitated particles were examined by infrared radiation spectroscopy (IR), laser light diffraction and light-optical microscopy. The results show that octogen with a narrow particle size distribution was obtained. The crystals are of the same modification as the raw material and of hight purity. The modification and the particle size are influenced by the solvent used for the recrystallization.