Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Conceptual design of a novel hybrid fuel cell/desalination system

A novel concept for integrating fuel cells with desalination systems is proposed and investigated in this work. Two unique case studies are discussed — the first involving a hybrid system with a reverse osmosis (RO) unit and the second — integrating with a thermal desalination process such as multi-stage flash (MSF). The underlying motivation for this system integration is that the exhaust gas from a hybrid power plant (fuel cell/turbine system) contains considerable amount of thermal energy, which may be utilized for desalination units. This exhaust heat can be suitably used for preheating the feed in desalination processes such as reverse osmosis which not only increases the potable water production, but also decreases the relative energy consumption by approximately 8% when there is an increase of just 8°C rise in temperature. Additionally, an attractive hybrid system application which combines power generation at 70%+ system efficiency with efficient waste heat utilization is thermal desalination. In this work, it is shown that the system efficiency can be raised appreciably when a high-temperature fuel cell co-generates DC power in-situ with waste heat suitable for MSF. Results indicate that such hybrid system could show a 5.6% increase in global efficiency. Such combined hybrid systems have overall system efficiencies (second-law base) exceeding those of either fuel-cell power plants or traditional desalination plants.     

Assessment of mechanical and healing behaviors of glass fibers-epoxy composite containing the microcapsules with the nanocomposite shell

In the current study, the effect of adding the encapsulated healing agent with neat polymeric and nanocomposite shells on the mechanical-healing features of glass fibers/epoxy composite under various loads was investigated. Therefore, the microcapsules with urea-formaldehyde (UF) nanocomposite shell containing the various weight fraction of silica nanoparticles (0, 1, 2, 3) were synthesized. After that, the flexural, tensile, and interlaminar shear strength (ILSS) samples were destructed by using the quasi-static penetration method with the damaging force of 500, 1050, and 2900 N, respectively. The maximum healing efficiency in the flexural loads belonged to the composite with the 3 wt% nanosilica on the surface of microcapsules, which was 83.9%. Also, it was found the increment in the weight fraction of silica nanoparticles had a negligible effect on the healing ability of composite under tensile loading. Achieving 135.8% healing efficiency in the composite with the 2 wt% nanosilica under the shear loads can be one of the most important findings in this work.     

Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological,Mechanical, and Gas Barrier Properties

Herein, a simple melt-blending method is utilized to disperse of halloysite nanotubes (HNTs) in polystyrene/polyolefin elastomer (PS/POE) blends. Based on morphological studies, the PS/POE/HNT nanocomposite containing up to 3 phr HNTs shows excellent nanofiller dispersion, while those filled with 5 phr HNTs exhibit nanofiller aggregation. To overcome the nanofiller aggregation issue, the polypropylene-grafted-maleic anhydride (PP-g-MA) compatibilizer is added to the PS/POE/HNT nanocomposite, which results in improved mechanical properties for the nanocomposite sheets. Furthermore, the addition of compatibilized HNTs to the PS/POE blends leads to decreased O₂ and N₂ gas permeabilities. Besides, incorporating POE, HNTs, and PP-g-MA leads to a decrease in water vapor transmission of PS. In the end, the experimentally-determined mechanical properties and gas permeabilities of the nanocomposite sheets are compared to those predicted by prevalent theoretical models, revealing a good agreement between the experimental and theoretical results. Molecular-dynamics simulations are also carried out to calculate the gas diffusion coefficients in the different sheets to further support the experimental findings in this study. Overall, the PS/POE/HNT/PP-g-MA nanocomposite sheets fabricated in this work demonstrate excellent mechanical and gas barrier properties; and hence, can be used as candidate packaging materials. However, the strength of the resulting PS/POE blend may be inferior to that of the virgin PS.     

Synthesis,properties, and applications of polylactic acid-based polymers

Polylactic acid (PLA) is known as one of the greatest promising bioabsorbable and compostable polyesters with the capability of high molecular weight synthesis. Lactic acid condensation, azeotropic dehydration, and condensation ring-open polymerize of lactide are three methods for PLA polymerization. Comprehension of material properties is critical for choosing the right processing method and adjusting PLA characteristics. A variety of mechanical properties of this material, from soft and elastic to stiff and high strength makes PLA suitable for a wide range of applications. Besides, PLA can be blended or copolymerized with other polymeric or non-polymeric substances. Thus, this polymer can achieve suitable chemical, mechanical, and rheological properties. Understanding the role of these properties and selecting a suitable processing technique is necessary for its intended consumer and various applications. This study elaborated a general summary of the polymerization, processing, and characteristics of PLA (i.e., structural diversities, rheological performances, mechanical properties, and permeability). Besides, this work presented some information regarding essential factors that can be used for modifying PLA properties to address the requirements for various applications such as biomedical, food packing, biocomposite, and additive manufacturing.     

Solvent screening for non‐aqueous extraction of Alberta oil sands

Non‐aqueous extraction of bitumen from oil sands has the potential to reduce fresh water demand of the extraction process and eliminate tailings ponds. In this study, different light hydrocarbon solvents, including aromatics, cycloalkanes, biologically derived solvents and mixtures of solvents were compared for extraction of bitumen from Alberta oil sands at room temperature and ambient pressure. The solvents are compared based on bitumen recovery, the amount of residual solvent in the extracted oil sands tailings and the content of fine solids in the extracted bitumen. The extraction experiments were carried out in a multistage process with agitation in rotary mixers and vibration sieving. The oil sands tailings were dried under ambient conditions, and their residual solvent contents were measured by a purge and trap system followed by gas chromatography. The elemental compositions of the extraction tailings were measured to calculate bitumen recovery. Supernatants from the extraction tests were centrifuged to separate and measure the contents of fine solid particles. Except for limonene and isoprene, the tested solvents showed good bitumen recoveries of around 95%. The solvent drying rates and residual solvent contents in the extracted oil sands tailings correlated to solvent vapour pressure. The contents of fine solids in the extracted bitumen (supernatant) were below 2.9% for all solvents except n‐heptane‐rich ones. Based on these findings, cyclohexane is the best candidate solvent for bitumen extraction, with 94.4% bitumen recovery, 5 mg of residual solvent per kilogram of extraction tailings and 1.4 wt% fine solids in the recovered bitumen. © 2012 Canadian Society for Chemical Engineering     

Simulation study and kinetic parameter estimation of underground coal gasification in Alberta reservoirs

A new method is developed for the estimation of chemical reaction kinetics at high-pressure underground coal gasification from the field produced gas composition. This method combines a developed numerical forward model and field data to investigate uncertain parameters. The forward model is developed on the basis of a unique porous media approach that combines the effects of heat, mass transport, and chemical reactions to simulate the underground coal gasification in three-dimensional basis. The chemical reaction kinetics, that is limited to low pressure, is upscaled based on the available experimental data. A comprehensive sensitivity analysis is carried out to estimate the reaction kinetics and investigate the effect of various parameters, such as pressure, temperature, and reaction environment, on the produced gas composition. The novelty of the developed method is in its applicability as well as its ability to generate the chemical reaction kinetics that corresponds to the field under study. The advantage of the proposed technique is that the sensitivity of the model to different kinetic parameters can be investigated by a graphical method.     

Conformational,thermal, and ionic conductivity behavior of PEO in PEO/PMMA miscible blend: Investigating the effect of lithium salt

In this research, influence of incorporating LiClO₄ salt on the crystallization, conformation, and ionic conductivity of poly(ethylene oxide) (PEO) in its miscible blend with poly(methyl methacrylate) (PMMA) is studied. Differential scanning calorimetry showed that the incorporation of salt ions into the blend suppresses the crystallinity of PEO. The X‐ray diffraction revealed that the unit‐cell parameters of the crystals are independent of the LiClO₄ concentration despite of the existence of ionic interactions between PEO and Li cations. In addition, the complexation of the Li⁺ ions by oxygen atoms of PEO is investigated via Fourier transform infrared spectroscopy. The conformational changes of PEO segments in the presence of salt ions are studied via Raman spectroscopy. It is found that PEO chains in the blend possess a crown‐ether like conformation because of their particular complexation with the Li⁺ ions. This coordination of PEO with lithium cations amorphize the PEO and is accounted for suppressed crystallinity of PEO in the presence of salt ions. Finally, electrochemical impedance spectroscopy is used to characterize the ionic conductivity of PEO in the PEO/PMMA/LiClO₄ ternary mixture at various temperatures. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013