Taguchi Optimization of Solvent-Antisolvent Crystallization to Prepare Ammonium Perchlorate Particles

The sphericity and size of ammonium perchlorate (AP) particles significantly influence the properties of composite propellants. As the AP particles become more spherical, the accumulation coefficient increases, the viscosity during casting decreases, and the particle loading and burning rate increase. Hence, the production of micronized AP particles with an average size between 1 and 20 μm is important to increase the loading percentage of AP in the composite propellant. Here, the Taguchi experimental design was used to optimize the solvent-antisolvent crystallization (SAC) process for the preparation of micronized AP particles with higher sphericity. SAC parameters such as the type of antisolvent, the solvent-to-antisolvent ratio, the antisolvent temperature, the stirring speed, and the retention time were investigated at four levels. The type of antisolvent and the solvent-to-antisolvent ratio were found to mainly contribute to improving the sphericity and size of the AP particles, respectively.     

Synthesis of water dispersible reduced graphene oxide via supramolecular complexation with modified β-cyclodextrin

A noncovalent functionalization of the edges of reduced graphene oxide (RGO) with β-cyclodextrin-graft-hyperbranched polyglycerol (β-CD-g-HPG) was successfully performed via a host-guest interaction. The results showed that β-CD-g-HPG disperses the graphene sheets better than pure β-CD or HPG. The resulted supramolecular structure is stable in neutral water medium more than one week. However, in acidic medium the host-guest interaction is collapsed and graphene nanosheets precipitate.     

Synergistic effect of nanoparticles and Thalassospira sp. isolated from Bahregan area in biodegradation of oil sludge

Oil sludge is obtained from the contaminated site of Bahregan area in the Persian Gulf in Iran. Chemotaxis was used for the isolation of alkane-degrading bacteria from oil sludge and the alk genes were determined with specific primers. bac1 identified in Thalassospira was selected as a powerful strain for biodegradation of oil sludge. Biodegradation of oil sludge by bac1 in the presence of nanoparticles was investigated by GC-MS analysis. Synergistic effect of Fe₂O₃ and Fe₃O₄ nanoparticles on bacteria increases the biodegradation of oil sludge and produces cyclosiloxane compound which is used in the field of medicine; however, the Thalassospira reduced its toxicity in the environment.     

Nicotinic Acid Increases Adiponectin Secretion from Differentiated Bovine Preadipocytes through G-Protein Coupled Receptor Signaling

The transition period in dairy cows (3 weeks prepartum until 3 weeks postpartum) is associated with substantial mobilization of energy stores, which is often associated with metabolic diseases. Nicotinic acid (NA) is an antilipolytic and lipid-lowering compound used to treat dyslipidaemia in humans, and it also reduces non-esterified fatty acids in cattle. In mice the G-protein coupled receptor 109A (GPR109A) ligand NA positively affects the secretion of adiponectin, an important modulator of glucose and fat metabolism. In cattle, the corresponding data linking NA to adiponectin are missing. Our objective was to examine the effects of NA on adiponectin and AMPK protein abundance and the expression of mRNAs of related genes such as chemerin, an adipokine that enhances adiponectin secretion in vitro. Differentiated bovine adipocytes were incubated with pertussis toxin (PTX) to verify the involvement of GPR signaling, and treated with 10 or 15 µM NA for 12 or 24 h. NA increased adiponectin concentrations (p ≤ 0.001) and the mRNA abundances of GPR109A (p ≤ 0.05) and chemerin (p ≤ 0.01). Pre-incubation with PTX reduced the adiponectin response to NA (p ≤ 0.001). The NA-stimulated secretion of adiponectin and the mRNA expression of chemerin in the bovine adipocytes were suggestive of GPR signaling-dependent improved insulin sensitivity and/or adipocyte metabolism in dairy cows.     

An improvement of quantitative strategic planning matrix using multiple criteria decision making and fuzzy numbers

The Quantitative Strategic Planning Matrix (QSPM) is a useful tool to prioritize strategies at any level including corporate, business and functional. The ratings and attractive scores used in QSPM, however, require judgmental decisions and should be based on expert's opinion to ensure the applicability of chosen strategies. Application of a fuzzy multi-criteria decision making method is proposed in this paper with the goal of improving the output of conventional QSPM by allowing the experts to employ linguistic terms (qualitative data) in their judgments. Namely, a multi-criteria decision making index via the technique for Order Preference by Similarity to Ideal Solution (TOPSIS) is adapted to the fuzzy QSPM in finding the sum total attractive scores of strategies. As a case study, the proposed method has been applied for strategy prioritization in a Tile Company. The results have been verified with expert knowledge and showed an improvement compared to the non-fuzzy QSPM.     

A simplified equation of state for polymer melts from perturbed Yukawa hard-sphere chain

This paper addresses the modeling of the pressure?Cvolume?Ctemperature (PVT) properties of 14 polymer melts using simplified Yukawa hard-sphere-chain equation of sate (EOS) plus first-order perturbation theory. Three pure-component parameters appeared in the EOS have been determined via the volumetric data. These parameters reflect the segment number, non-bonded segment?Csegment interaction energy, and segment size. Likewise, this study considered chains that interact through a range-parameter of Yukawa potential with l.8. The reliability of the proposed model has been assessed by comparing the results with 1,315 experimental data points over a broad range of pressures and temperatures for which, their measured values were available in the literature. Our calculations on the specific volume of studied liquid polymers reproduce very accurately the experimental PVT data. The overall average absolute deviation of the calculated specific volumes from literature data was found to be 0.89?%.     

Nanoscale mass nanosensor based on the vibration analysis of embedded magneto-electro-elastic nanoplate made of FGMs via nonlocal Mindlin plate theory

Microsystem Technologies - In the current paper, the sensitivity performance of functionally graded magneto-electro-elastic (FG-MEE) nanoplate with attached nanoparticles as a nanosensor is...     

The effect of pressure on removal of carbon monoxide in biofilter

Solubility of carbon monoxide in water is very important for its biological oxidation or removal process of gaseous pollutants. Present research shows the effect of pressure on solubility of carbon monoxide in liquid phase and its removal process by a biofilter. The results are considered as laboratory research on carbon monoxide elimination. In this method a pressurized trickle-bed biofilter was used to increase pressure in the reactor. The biofilter was filled with Leca-stones and inoculated with microorganisms. When the system’s pressure is increased, the solubility of carbon monoxide will be increased, respectively, and it causes a better reaction of the microorganisms for removing of gaseous pollutants. The efficiency was improved significantly by increasing the pressure in the reactor.     

Discussion on “Enhancement of combined heat and power economic dispatch using self adaptive real-coded genetic algorithm,by P. Subbaraj et al., Applied Energy 86 (2009) 915–921.”

The paper studied by Subbaraj et al. (2009) considers the feasibility of using self adaptive real-coded genetic algorithm for enhancement of combined heat and power economic dispatch. The paper includes some problems about the considered feasible operating region. In this discussion, the controversial point of the paper are given.     

Numerical Simulation of the Mechanical Properties of Sintered and Bonded Perforated Hollow Sphere Structures (PHSS)

This paper investigated the uniaxial mechanical properties of a new type of hollow sphere structures. For this new type, the sphere shell was perforated by several holes in order to open the inner sphere volume and surface. The mechanical properties, i.e. elastic properties and initial yield stress of perforated hollow sphere structures (PHSS) in a primitive cubic arrangement were numerically evaluated for different hole diameters and different joining techniques of the hollow spheres. The results are compa...