自制地温转接板引起测量误差偏移量的测定

本文通过实验方式,建立了测定自制地温转接板引起测量误差偏移量的测量模型,通过实验数据,计算出了自制地温转接板引起的被校传感器测量误差偏移量。     

A thermovisco-hyperelastic constitutive model of HTPB propellant with damage at intermediate strain rates

The uniaxial compressive tests at different temperatures (223–298 K) and strain rates (\(0.40\mbox{--}63~\mbox{s}^{-1}\)) are reported to study the properties of hydroxyl-terminated polybutadiene (HTPB) propellant at intermediate strain rates, using a new INSTRON testing machine. The experimental results indicate that the compressive properties (mechanical properties and damage) of HTPB propellant are remarkably affected by temperature and strain rate and display significant nonlinear material behaviors at large strains under all the test conditions. Continuously decreasing temperature and increasing strain rate, the characteristics of stress-strain curves and damage for HTPB propellant are more complex and are significantly different from that at room temperature or at lower strain rates. A new constitutive model was developed to describe the compressive behaviors of HTPB propellant at room temperature and intermediate strain rates by simply coupling the effect of strain rate into the conventional hyperelastic model. Based on the compressive behaviors of HTPB propellant and the nonlinear viscoelastic constitutive theories, a new thermovisco-hyperelastic constitutive model with damage was proposed to predict the stress responses of the propellant at low temperatures and intermediate strain rates. In this new model, the damage is related to the viscoelastic properties of the propellant. Meanwhile, the effect of temperature on the hyperelastic properties, viscoelastic properties and damage are all considered by the macroscopical method. The constitutive parameters in the proposed constitutive models were identified by the genetic algorithm (GA)-based optimization method. By comparing the predicted and experimental results, it can be found that the developed constitutive models can correctly describe the uniaxial compressive behaviors of HTPB propellant at intermediate strain rates and different temperatures.     

Three principles for preparing Al wire with high strength and high electrical conductivity

The trade-off relation between the strength and the electrical conductivity has been a long-standing dilemma in metallic materials. In the study, three key principles, i.e. elongated grains, sharp texture and nano-scale precipitates, were presented for preparing Al wire with high strength and high electrical conductivity based on the specially designed experiments for breaking the mutually exclusive relation between the strength and the electrical conductivity. The results show that the elongated grains could lead to a higher electrical conductivity in Al wire without sacrificing the strength; while, the 111 sharp texture can efficiently strengthen the Al wire without influencing the electrical conductivity. Furthermore, nano-scale precipitates with proper size can simultaneously improve the strength and electrical conductivity of Al alloy wire. Under the guidance of the above three key principles, Al wires with high strength and high conductivity were prepared.     

A facile synthesis of supported amorphous iron oxide with high performance for Cr(Ⅵ) removal from aqueous solution under visible light irradiation

A series of supported iron oxide nanoparticles were prepared by impregnation with Fe(NO_3)_3 supported on TiO_2,followed by low-temperature calcination. Scanning electron microscopy(SEM), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), UV–vis diffuse reflectance spectra and BET have been used to characterize the samples. These iron oxide-impregnated TiO_2 were examined for photocatalytic reduction of Cr(Ⅵ). The experiments demonstrated that Cr(Ⅵ) in aqueous solution was more efficiently reduced using Fe_2O_3/TiO_2 heterogeneous photocatalysts than either pure Fe_2O_3 or TiO_2 under visible light irradiation. All TiO_2 supported samples were somewhat active for visible light photoreduction. With an optimal mole ratio of 0.05-Fe/Ti, the highest rate of Cr(Ⅵ) reduction was achieved under the experimental conditions. We also compared the photoreactivity of TiO_2 supported iron oxide samples with that supported on Al_2O_3 and ZrO_2. It can be noted that iron oxide nanoparticles deposited on high surface area supports to increase the solid-liquid contact area renders it considerably more active. Noticeably,iron oxide cluster size and dispersion are important parameters in synthesizing active, supported Iron oxide nanoparticles. In addition, the interaction between iron oxide and TiO_2 was proposed as the source of photoactivity for Cr(Ⅵ) reduction.     

Unique role of non-mercapto groups in thiol-pinning-mediated Ag growth on Au nanoparticles

Owing to the strong affinity of thiols to Au and Ag, they are often employed to modify the surfaces of nanoparticles (NPs). Recently, these strong ligand-interface interactions have been employed to control NP growth, and this technique has emerged as a unique modulation strategy for creating unconventional plasmonic hybrid nanostructures. In these systems, the roles of the non-mercapto components of the thiol molecules and their structures are still unknown. Therefore, we herein present our investigation into this phenomenon. Primary amino (–NH₂) groups in thiols are found to play a key role in regulating growth kinetics, i.e., in accelerating Ag deposition on Au NPs. The–NH₂ groups are thought to bring Ag ions to the particle surface by coordinating to them, and thereby assist their reduction. The effect of molecular structure is non-trivial and thus provides the possibility of selective thiol detection. Based on the dependence of kinetic modulation on the non-mercapto components and molecular structures of molecules, we demonstrate the highly sensitive and specific detection of cysteine (limit of detection: 6 nM) in a mixture of 19 natural amino acids based on Ag growth on Au nanospheres. In addition, based on this modulation effect, we reveal the entrapping of chiral thiols within the growth layer through their plasmonic circular dichroism (PCD) responses. We believe that thiol-based growth regulation has great potential for creating plasmonic nanostructures with novel functionalities.

Open image in new window

     

Plasmon resonant amplification of a hot electron-driven photodiode

Nano Research - We report plasmon resonant excitation of hot electrons in a photodetector based on a metal/oxide/metal (Au/Al2O3/graphene) heterostructure. In this device, hot electrons, excited...     

基于Multitone信号的伺服系统频率特性测试方法研究

提出了一种频率特性测试方法,该方法以Multitone信号作为激励信号来减少测试时间,并运用相关分析法作为数据处理方法来提高测试精度;以某型舵机系统为例,对该方法进行了实验验证;实验结果表明,其测试精度与传统的测试方法基本相同,测试时间减少一半;该方法能有效减少噪声对测量结果的影响,适合频率特性的快速高精度测试。